Resetting Google account on Honor 10 from Android 10: all working methods

Resetting Google account on a smartphone Honor 10 managed Android 10 may be required in different situations: when selling the device, lost password or need to bypass FRP protection (Factory Reset Protection). The latter is activated automatically if a Google account was linked on the phone and then reset to factory settings. Without entering the correct login and password, the device turns into a “brick” and blocks access to the system.

In this article we will look at all current methods deleting a Google account on Honor 10 with firmware Android 10 (EMUI 10), including official methods through settings, bypassing FRP after a reset, as well as alternative solutions for cases when standard options do not work. We will pay special attention nuances of working with Honor models based on HiSilicon Kirin 970 processorsthat may affect the availability of some functions.

1. Preparing to reset your Google account: what you need to know

Before you begin deleting your account, it is important to assess the current state of the device and choose the appropriate method. This determines whether access to data will be maintained and whether the phone will not be blocked after the operation.

On Honor 10 s Android 10 there are three main scenarios:

• 🔄 The account is active, the phone is unlocked — you can delete your Google profile through the settings without losing data.
• 🔒 The phone is locked after reset (FRP) —you will need to bypass the protection using additional tools.
• 🛠️ The device does not respond to standard methods —alternative solutions are needed (ADB, Fastboot, third-party utilities).

If you plan sell or transfer Honor 10, it is recommended not only to delete your Google account, but also to perform a full reset (Settings → System → Reset). This will clear the device of personal data, including photos, messages and application passwords.

⚠️ Attention: On some firmware Honor 10 after deleting your Google account via settings may remain linked to Huawei ID (if it was created). This does not block the device, but may cause problems when re-authorizing in Huawei services.

2. Official method: deleting an account through the settings

If the phone unlocked and you have access to the menu, the easiest way is to delete the account through the standard settings Android 10. This method does not require additional tools and saves all data on the device (if you do not reset).

Instructions:

1. Open Settings (gear icon on the main screen or in the application menu).
2. Go to section Users and accounts (or Accounts depending on the EMUI version).
3. Select Google from the list of connected accounts.
4. Click on the email address you want to delete.
5. In the upper right corner, tap on the icon ⋮ (three dots) and select Delete account.
6. Confirm the action by entering PIN code, pattern or password screen lock.

After this, the account will be unlinked from the device, but Google application data (for example, contacts or calendar) will remain on the phone until the next synchronization. To completely delete them, go to Settings → Applications → Google and clear the cache/data.

3. Resetting a Google account after FRP blocking (Factory Reset Protection)

If you reset the settings on Honor 10 (Settings → System → Reset or through Recovery, and then the device requested the data of the previous Google account - this is FRP protection. It appears on all phones with Android 5.1+if a Google account was linked before the reset.

Bypass FRP on Honor 10 s Android 10 possible in several ways. Below are the most reliable methodstested on EMUI 10:

Method 1: Through an emergency call (for EMUI 10.0–10.1)

• 📞 On the lock screen press Emergency call.
• 🔢 Enter the combination ##4636## (the testing menu will open).
• 🔙 Return to the main screen by pressing the "Back" button.
• 📱 Now you can open Settings and add a new Google account.

Method 2: Using ADB (PC required)

If the first method did not work, try removing FRP via ADB (Android Debug Bridge). To do this:

1. Download and install Platform Tools on your computer.
2. Connect Honor 10 to your PC via a USB cable.
3. Open the command line in the folder with adb.exe and do:

adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1

After that, reboot your phone - the FRP lock will be removed.

⚠️ Attention: On some versions of EMUI 10, after bypassing FRP, you may need to re-activating the device via HiSuite or Huawei ID. If the phone asks for confirmation through the old account, try the method with Fastboot (described below).

Why does FRP lock appear even after deleting the account?

On some Honor 10 firmware, Google account data is saved securely section /data/system even after deleting through the settings. A factory reset does not clear this partition completely, so FRP remains active.

4. Alternative methods: Fastboot and third-party utilities

If standard methods do not help, you can use Fastboot mode or specialized apps to bypass FRP. These methods are suitable for experienced users, as they require working with the command line or third-party software.

Resetting FRP via Fastboot

Instructions:

1. Turn off Honor 10.
2. Hold Volume down + Powerto enter Fastboot Mode.
3. Connect the phone to the PC and run the command:

fastboot erase frp

After that, reboot the device - the lock should disappear.

apps for bypassing FRP

To automate the process, you can use utilities like:

• 🖥️ Huawei FRP Tool - supports most Honor/Huawei models.
• 🖥️ D&G Unlock Tool - paid software with wide functionality.
• 🖥️ Minimal ADB and Fastboot - for manual removal FRP.

Before using third-party apps be sure to check them for viruses and download only from official sources. Some utilities may contain malicious code or require payment for unlocking.

5. Common mistakes and how to avoid them

When resetting a Google account to Honor 10 users often encounter typical problems. Let's look at the most common of them and how to solve them.

Error	Cause	Solution
"Incorrect password" when entering account data	Two-factor authentication or outdated password	Restore access via Google recovery page
Phone is not visible in ADB/Fastboot	Missing drivers or USB debugging is disabled	Install HiSuite and enable debugging in the developer settings
After the reset, the binding to Huawei ID remained	The Huawei account was not deleted before the reset	Remove Huawei ID via Settings → Huawei ID or perform a hard reset again
Command fastboot erase frp not working	Blocked bootloader or an old version of Fastboot	Use an alternative command: fastboot erase config

If none of the methods worked, your Honor 10 or modified bootloader may be installed. In this case, it is recommended to contact a service center or use specialized forums (for example, custom firmware transfer to another user. Follow these recommendations: custom firmware or a modified bootloader. In this case, it is recommended to contact a service center or use specialized forums (for example, XDA Developers).

6. Security after reset: what to do next

After successfully deleting your Google account, it is important to ensure device security, especially if you plan to sell it or transfer it to another user. Follow these guidelines:

• 🔐 Create a new Google account (if you still have the phone) or skip this step when selling.
• 📱 Do full reset (Settings → System → Reset) to clear the data.
• 🔄 Update the firmware to the latest version (if the phone remains in use).
• 🛡️ Set up a screen lock (PIN, pattern or fingerprint).

If you are selling Honor 10, additionally:

• 📦 Remove the SIM card and memory card.
• 📝 Draw up an act of transfer of the device indicating the serial number (you can find it in Settings → About phone → Status).
• 🔧 Reset the network settings (Settings → Wireless networks → Reset networks) so that the new owner can connect to Wi-Fi without problems.

⚠️ Attention: On some models Honor 10 after a reset, a link to Huawei services (AppGallery, Huawei Mobile Services) may remain. To completely unlink the device, go to Settings → Huawei ID and delete the profile.

7. Restoring access to your Google account

If you deleted your account by mistake or forgot your login information, you can recover through official Google services. To do this:

1. Go to page account recovery.
2. Enter the last known email or phone number associated with the account.
3. Follow the instructions for identity verification (SMS, backup email or answers to security questions).

If two-factor authentication was enabled, but access to backup codes was lost, try:

• 📱 Use Google Authenticator application on another device (if it was synchronized).
• 📧 Check folder "Spam" in mail - sometimes recovery codes arrive there.
• 🕒 Wait 24-48 hours and try again (Google may temporarily block access after several unsuccessful attempts).

If the account was permanently deleted (for example, via Google Settings → Account Management → Delete account), restore it impossible. In this case, you will have to create a new profile.

FAQ: Frequently asked questions about resetting your Google account on Honor 10

Is it possible to reset a Google account without losing data?

Yes, if the phone is unlocked. Delete the account via Settings → Accounts → Google -this will not affect personal files. However, after resetting the FRP (if it was activated), the data will be lost.

What to do if, after resetting, the phone asks for an old Huawei ID account?

This means that the device was linked to Huawei IDDelete it via Settings → Huawei ID → Delete account or do a full reset again. times.

Does bypass FRP via ADB work on all versions of EMUI 10?

No, on some builds (for example, EMUI 10.1.0.123) command adb shell content insert may not work. In this case, try the method with Fastboot or third-party utilities.

Is it possible to bypass FRP without a computer?

Yes, but only on older versions of EMUI (up to 10.0). On new firmware, a PC with a PC is almost always required to bypass FRP. ADB/Fastboot or specialized software.

How to check if the account is completely deleted?

Go to Settings → Accounts and make sure that your Google profile is not in the list. You can also perform a test reset: if after it the phone does not ask for account data, FRP is disabled.