Modern wireless headphones from Xiaomi i Redmi have become an integral part of the smartphone ecosystem, offering users high-quality sound and active noise reduction. However, owners of phones based on Androidthat are not products of this brand often encounter difficulties during initial synchronization. The main problem lies not in the lack of compatibility, but in the need to use specialized software to unlock the full functionality of the device.
The pairing process may vary depending on the specific model of accessories and the version of the operating system of your gadget. The standard protocol Bluetooth provides basic connectivity for music and calls, but gesture controls, firmware updates, and equalizer settings will require additional steps. In this article, we will analyze in detail all stages of connection, from removal from the case to solving common problems with connection stability.
Preparing devices for pairing
Before starting the procedure, make sure that both devices - a smartphone and headphones - have sufficient battery power. Low energy levels in the case may result in the headphones not entering detection mode or turning off during setup. It is also recommended to check whether the module is enabled Bluetooth in the settings of your phone and whether it is visible to other devices.
Remove both headphones from the charging case. In most models of the series Mi True Wireless Earbuds or Redmi Buds this action automatically puts them into pairing mode, which is indicated by a rapidly flashing indicator on one of the headphones. If the light does not blink, you may need to force reset or hold the touch zone.
Important: If the headphones were previously connected to another phone, they may automatically try to connect to it, ignoring your new device. In this case, you need to turn off Bluetooth on your old phone or remove the device from the list of paired ones on it.
⚠️ Attention: Some models, such as Redmi Buds 3 Pro or Mi Buds 4, require installation of the application to initially activate the noise reduction functions. Without the application, they will work in the mode of regular stereo headphones.
☑️ Check before connecting
Standard connection via Bluetooth
The fastest way to start using it is classic pairing through the Android system menu. This method is suitable for all models, including wired versions with connector USB-C or 3.5 mm, which are detected automatically by the system. For wireless models, open the phone settings and go to the wireless network management section.
Click on the search for new devices button and wait until the name of your headphones appears in the list of available ones. Usually it coincides with the model, for example Mi True Wireless Earphones 2 or Redmi AirDots. Tap the name to start the process (pairing).
After a successful connection, the headphone battery icon (on some MIUI or HyperOS shells) or the standard Bluetooth icon will appear in the status bar. You can now play audio, but advanced settings will not be available.
- 🎧 Open
Settings → Connected devices → Pair a new device. - 📱 Keep the headphones close to the phone (no more than 1 meter) while searching.
- ✅ Confirm the pairing request if it appears on the smartphone screen.
If the phone does not see the headphones, put them back in the case, close the lid for 10 seconds and remove them again. This will restart the Bluetooth module in the accessories.
Using the Xiaomi Earbuds application
For the smart functions to fully work, you must install the official application Xiaomi Earbuds from the store Google Play. This software allows you to calibrate sound, customize touch controls, and update headphone firmware. Without this app, you won't be able to switch noise canceling modes or use transparent mode.
Once installed, launch the app and grant it all necessary permissions, including access to location and notifications. The application will automatically scan the air and offer to connect detected headphones. If the automatic search does not work, select a model from the list manually.
Inside the interface you will find an equalizer with preset sound profiles, such as “Bass”, “Vocals” or “Treble”. There is also a function for searching for a lost earphone, which makes it emit a loud beep.
Problems with determining the region in the application
If the application writes “The device is not supported,” try changing the region to “China” or “India” in the phone settings, reboot the device and start the search again. After connecting, the region can be returned back.
| Headphone model | Connection type | ANC support | Application |
|---|---|---|---|
| Redmi Buds 4 Pro | Bluetooth 5.3 | Yes (43 dB) | Xiaomi Earbuds |
| Mi True Wireless 2S | Bluetooth 5.0 | No | Xiaomi Earbuds |
| Redmi Buds 3 Lite | Bluetooth 5.2 | No | Xiaomi Earbuds |
| Mi Neckband Pro | Bluetooth 5.0 | Yes | Xiaomi Earbuds |
Setting up touch controls and gestures
One of the key features of the ecosystem is the flexible configuration of touch zones. By default, touches can play music or answer calls, but you can reassign these actions through the app. This is especially convenient for controlling a voice assistant or switching tracks without taking out your phone.
Go to the "Gestures" or "Controls" section in the application. You will see a diagram of the left and right earphone. Clicking on the earpiece area will open a menu of available actions. Please note that you can assign multiple actions to one earphone depending on the number of taps (single, double, triple or long press).
Tip: Do not assign too complex combinations, such as quadruple taps, as they are difficult to perform quickly and accurately. It is optimal to use a double press to pause and a long press to change the noise reduction mode.
⚠️ Attention: On some budget segment models, such as Redmi Buds 3 Young, gesture settings may be limited or completely absent. The functionality depends on the firmware version of the specific device.
Firmware updates and error corrections
The manufacturer regularly releases software updates to correct connection errors, improve Bluetooth stability and microphone quality. Checking for a new firmware version should be a regular procedure, especially if you notice problems with operation.
To update, connect the headphones to your phone and open the application. If a new version is available, a notification will appear. The download and installation process may take several minutes. At this time, do not close the application and keep the headphones near the phone.
Settings → About headphones → Software update → Download and installIf an error occurs during the update process or the headphones stop responding to commands, perform a full reset. To do this, place the headphones in the case, open the lid and hold the reset button on the back panel (or the touch zones of both headphones) for 10-15 seconds until the indicator color changes.
Always complete the update process to 100% and do not discharge the case at this moment, otherwise the headphones may turn into a “brick” and require service repair.
Solving problems with connection and sound
Sometimes users are faced with a situation where one earphone works and the second is silent, or the sound is interrupted. Most often this is due to desynchronization of the channels between the left and right headphones. In this case, a re-synchronization procedure is required within the pair of devices.
Remove the headphones from the Bluetooth list on your phone (“Forget device”). Place both headphones in the case and close the lid. Open the lid and press the function key button on the case three times quickly, or hold the sensors of both headphones at the same time until the indicator flashes white.
Problems may also arise due to interference in the Wi-Fi airwaves or the operation of other Bluetooth devices nearby. Try moving away from the router or turning off Bluetooth on other gadgets within range. Check if the power saving mode is turned on on your phone, which may limit the operation of wireless modules.
- 🔋 Check the charge of both headphones - a charge imbalance causes one of them to turn off.
- 📶 Make sure that there are no thick walls or metal barriers between the phone and the headphones.
- 🧹 Clean the speaker mesh from earwax, which can muffle the sound.
Why does the phone not see the Xiaomi headphones?
The headphones may not have entered pairing mode. Remove them from the case and make sure the indicator is flashing. If not, perform a factory reset. Also check if they are automatically connected to another device.
How to connect headphones to two phones at the same time?
The Multipoint function is supported only in older models (for example, Mi Buds 3 Pro). Activate it in the Xiaomi Earbuds app. For other models, you need to manually switch Bluetooth between devices.
What to do if only one earphone works?
This is a sign of desynchronization. Remove the device from Bluetooth, put the headphones in the case, close the lid, wait 10 seconds and open it again. If that doesn’t help, do a hard reset.
Can Xiaomi headphones be used with an iPhone?
Yes, basic connection via Bluetooth works. However, the Xiaomi Earbuds application for iOS has limited functionality compared to Android, and some settings may not be available.
How to check the authenticity of Xiaomi headphones?
Original devices successfully connect to the proprietary application and show the correct charge level of each earphone separately. Counterfeits are often identified as one device or are not visible in the application.