Integration of a smartphone with the multimedia system of a modern car provides access to navigation, music and calls through a familiar interface. For crossover owners Haval Jolion the issue of connection Android Auto often becomes relevant immediately after purchase, since the standard system may not work correctly or require additional settings. The activation process depends on the year of manufacture of the car, the version of the head unit software and the type of connection used.
Owners of new models are faced with the fact that the function may be hidden in the menu or require activation through the dealership. Older firmware versions sometimes lack wireless protocol support, forcing you to use a cable. It is important to understand that successful synchronization requires not only the correct sequence of actions in the car menu, but also appropriate preparation of the smartphone itself.
In this article we will analyze in detail all the stages of connection, from checking compatibility to solving common problems with disconnected connections. You'll learn how to activate hidden features, which cables are suitable for stable performance, and why you sometimes need to reset your media settings. Following these instructions will help turn your screen Haval into a full-fledged digital services control center.
Checking compatibility and preparing equipment
Before you begin setup, you need to make sure that your equipment supports the required communication standards. The standard multimedia system Haval Jolion is based on the operating system Android, but the interface version may differ depending on the sales market (China, Russia, Europe). The function requires a smartphone running Android 8.0 or higher with the Android Auto application installed, although on newer versions of the OS it is built into the system.
The quality of the connecting cable is a critical element. Cheap cables that come with inexpensive electronics often only support charging and do not transmit data. For a stable connection, you need a certified cable that supports high-speed data transfer, preferably an original one from the smartphone manufacturer or a branded accessory with markings Data Sync.
- 📱 Make sure that the USB debugging mode is enabled on your smartphone (optional, but useful for diagnostics).
- 🔌 Use a cable no longer than 1 meter to minimize signal loss.
- 🔋 Charge your phone to at least 20%, as the pairing process is energy-consuming.
⚠️ Attention: Some early batches Haval Jolion came with software in which the Android Auto module was deactivated at the firmware level. In this case, connecting the cable will not work without updating the software at the dealer.
If the cable is working, but the phone does not see the car, try clearing the Android Auto application cache on your smartphone through the app settings before connecting again.
Setting up a wired connection via USB
The most reliable method of integration is using a wired connection. It provides stable data transmission without delays, which is especially important for real-time navigation. First you need to find a USB port that supports data transfer. There are usually several ports, but only one of them (often located at the bottom of the center console) is functional for Haval Jolion There are usually several connectors, but only one of them (often located at the bottom of the center console) is functional for Smart Link.
Connect your smartphone to the correct port. A notification about a new device should appear on the car screen. If there is no automatic request, go to the main multimedia menu and find the Settings → Connections → Smart Linksection. Here you need to select the mode Android Auto. In some firmware versions, this item may be simply called “Phone Projection.”
After selecting the mode, a request will appear on the smartphone screen to allow access to data and launch the application. Confirm the action and accept the terms of the user agreement. The Android Auto interface should appear on the radio display within 10-15 seconds. If the screen remains black or shows the loading logo, try disconnecting and reconnecting the cable.
Menu path: Settings → Connections → Smart Link → Android Auto☑️ Checking the wired connection
Activation of wireless Android Auto
Owners of restyled cars versions or vehicles with updated firmware can rely on wireless connectivity. This feature eliminates the need to use a cable every time, providing automatic communication when the engine starts. However, for operation Wireless Android Auto it is required that both the head unit and the smartphone support the Wi-Fi Direct standard and Bluetooth 5.0.
To activate, first perform the initial pairing via Bluetooth. Go to your phone settings, turn on Bluetooth and find a device with the name Haval Jolion or similar. After pairing, go to the car's multimedia menu and make sure the wireless projection function is active. Sometimes you need to manually turn on the switch Wireless connection in the Smart Link section.
When connecting wirelessly for the first time, the system may request confirmation via a PIN code, which will be displayed on the car screen. Enter it on your smartphone. After successful authorization, the system will remember the device and will try to connect automatically every time the engine starts. It is worth noting that the wireless mode consumes more power, so it is recommended to keep the phone on a wireless charger or connect it with a cable only for power.
Why can a wireless connection be unstable?
Wireless Android Auto uses Wi-Fi frequencies that may conflict with other devices in the cabin or external sources of interference. Also, the stability is affected by the version of the Wi-Fi module drivers in the car.
Updating multimedia software
A frequent reason for the inability to activate Android Auto is outdated software of the head unit. The manufacturer Haval periodically releases updates that correct compatibility errors and add new features. You can check the current software version in the section Settings → System → About the system.
The update can be performed in two ways: automatically via Wi-Fi or manually via a USB drive. The first option is simpler: connect the car to an Internet access point and press the Check for updatesbutton. If the system finds a new version, the download and installation will begin. The process may take from 10 to 30 minutes, during which time the engine must be running to maintain voltage in the network.
| Software version | Release date | Key changes | Installation method |
|---|---|---|---|
| V1.0.5 | January 2023 | Basic support for Android Auto | Dealership |
| V1.2.0 | June 2023 | OTA / USB | |
| V1.3.1 | November 2023 | Correction of disconnected connections | OTA / USB |
| V2.0.0 | March 2026 | New interface and widgets | Dealer center |
If automatic update is not available, the firmware file must be downloaded from the manufacturer’s official website or support portal. Unpack the archive onto a flash drive formatted in FAT32, insert it into the car port and follow the instructions on the screen. It is important not to remove the drive until the process is complete.
Solving common connection problems
Even if you follow all the instructions, users may encounter errors. The most common problem is cyclical reconnection or a black screen after launching the application. This is often due to a conflicting application version on the smartphone. Try updating the Android Auto app via the Google Play Store or uninstalling updates if the problem occurred after the last update.
Another difficulty is the system’s refusal to recognize the phone as a projection device. In this case, a complete reset of the connection settings will help. Go to the Bluetooth menu on your phone and in your car, delete saved pairs for each other. Then, in Android Auto settings on your phone, select "Delete all cars" and start the pairing process again.
⚠️ Warning: When you reset your multimedia system, you will lose your saved radio stations and equalizer settings. Write them down in advance or take screenshots.
If your phone is charging but not transferring data, the problem may be with the USB port. T Haval Jolion the connector contacts may become oxidized or dirty. Gently blow out the port with compressed air or use a soft brush to clean. Also check the developer settings on your smartphone: the “Charge Only” mode should be switched to “File Transfer” or “Android Auto”.
In 90% of cases, the problem is solved by replacing the USB cable with an original one or a high-quality certified copy that supports data transfer.
Customizing the interface and useful functions
After successful connection, you should customize the interface for yourself. Android Auto lets you rearrange the order of apps on the Home screen. Long-press the application icon and drag it to a convenient location. It is recommended to move forward the navigator (Yandex.Navigator or Google Maps) and the music player for quick access while driving.
Activate voice control via a button on the steering wheel or a touch button on the screen. This allows you to safely send messages, search for points of interest and change tracks without taking your eyes off the road. For the microphone to work correctly, make sure that in the privacy settings of your smartphone, access to the microphone for the Android Auto application is allowed.
Theme settings are also available. At night, the system automatically switches to a dark theme to avoid blinding the driver. This behavior can be changed in the car screen settings by selecting a constant light or dark mode if the standard automation does not work correctly when the light changes.
- 🗺️ Set up weather and calendar widgets for a quick overview of the situation.
- 🎵 Link streaming service accounts to access playlists.
- 📞 Sync contacts to display names on incoming calls.
Why does Android Auto turn off while driving?
Most often this happens due to a bad contact in the cable that loses connection due to vibration. Less commonly, the reason is overheating of the smartphone or head unit, when the system forcibly closes resource-intensive applications.
Is it possible to watch videos via Android Auto on Haval?
The standard functionality blocks video for security. To view it, you will need to install third-party launchers or modified versions of the application, which is not recommended due to the risk of system disruption.
Does Haval Jolion support Yandex.Auto?
In some configurations for the Russian market, Yandex.Auto is pre-installed. It can work in parallel with Android Auto, but switching between them requires restarting the media or selecting a source from the menu.
What to do if the map in the navigator does not rotate?
Check the compass settings in the navigation application itself. Sometimes it is necessary to calibrate the smartphone sensors by rotating it in space in a figure of eight.