The modern wearable electronics market offers many models, and Smart Watch 9 Pro occupies a significant place in it due to its advanced functionality and affordable price. However, owners of devices based on Android often encounter difficulties when starting up for the first time, since the pairing and initial configuration process has its own nuances. Incorrect settings may result in the device not receiving notifications or health data being incorrect.
In this article we will analyze in detail the entire process of connecting the gadget to a smartphone, installing the necessary software and fine-tuning the sensors. You will learn how to optimize the performance of Bluetooth connections and avoid common mistakes that beginners make. Ready to turn your device into a reliable assistant for training and communication?
First, make sure your smartphone is at least 50% charged and the watch itself is fully charged before turning it on. This is critically important, since the process of initial synchronization and downloading updates can require significant energy resources.
Preparing your smartphone and watch for pairing
Before you start searching for a device, you need to prepare your phone's operating system. Often the problem lies not in the watch itself, but in disabled permissions or outdated drivers Bluetooth on the smartphone side. Go to your phone's settings and check if geolocation is enabled - this is a mandatory requirement for the correct operation of device search protocols in modern versions of Android.
Next, you should clear the list of previously paired devices if you have tried to connect your watch previously without success. Go to the menu Settings → Connected devices → Connection settings and delete the profile Smart Watch 9 Proif it is present there. This will avoid address conflicts and authentication errors when reconnecting.
⚠️ Attention: Do not try to connect the watch directly through the Bluetooth system menu in the phone settings. For all functions to work correctly, you must use a specialized companion application.
Make sure that the power saving mode is turned off on your device during setup. Aggressive energy-saving algorithms can block background processes necessary to establish communication between gadgets.
Before starting setup, restart your smartphone - this will clear the cache of network services and often solves problems with the visibility of Bluetooth devices.
Installing a companion application and registration
Main tool control Smart Watch 9 Pro is a proprietary application, which is usually called WearPro or Da Fit depending on the specific firmware revision. You can download it from the official Google Play store or by scanning the QR code displayed on the watch screen when turned on. Using third-party application stores is not recommended due to the risk of downloading a modified version with reduced functionality.
After installing the application, you will need to create an account or log in through social networks. This step is necessary to synchronize health data in the cloud storage. During the registration process, the application will ask for a number of permissions: access to contacts, call log, location and notifications.
- 📍 Geolocation permission is necessary for the GPS tracker and route map to work.
- 📞 Access to the phone is required to display the name of the caller on the watch screen.
- 🔔 Permission notifications is critical for receiving messages from instant messengers.
- 💾 Access to the storage is required to save backup copies of settings.
Refusal to provide any of these permissions will limit the functionality of the device. For example, without access to notifications, the watch will only work as a regular chronometer, without informing you about incoming events.
The process of initial pairing of devices
Now we move on to the most important stage - establishing a connection. Launch the installed application on your smartphone and click the button Add device or icon + in the upper corner of the interface. The application will begin scanning the space in search of available gadgets.
A QR code or confirmation of the pairing request should appear on the watch screen. If you are using a QR code, select the scanning option in the application and point your smartphone camera at the watch screen. If you use search by name, select from the list Smart Watch 9 Pro A QR code or confirmation of the pairing request should appear. If you are using a QR code, select the scanning option in the application and point your smartphone camera at the watch screen. If you are using a search by name, select from the list Watch 9 Pro and confirm the pairing on both devices.
⚠️ Attention: If a confirmation code appears during the pairing process, make sure that the numbers on the screen of the phone and the watch completely match. Never confirm the connection if the codes are different.
Sometimes the process may freeze at the “Connecting...” stage. In such a situation, try turning Bluetooth off and on again on your smartphone without closing the application. Also make sure that the watch is no further than 1-2 meters from the phone.
Sequence of actions in case of failure:1. Close the application completely (swipe up in the running tasks menu).
2. Turn off Bluetooth in the notification shade.
3. Restart the watch via the Settings -> Restart menu.
4. Turn on Bluetooth and start the application again.
☑️ Checklist for successful pairing
Setting up the user profile and sensors
After successful connection, you need to correctly configure the anthropometric data. The accuracy of calculations of calories, steps and heart rate zones directly depends on how accurately you indicate your weight, height, age and gender in the application profile. This data is used by algorithms PPG (photoplethysmography) to interpret signals from the sensors.
Pay special attention to calibrating the heart rate sensor. To do this, fasten the strap tightly on your wrist - it should fit against the skin, but not squeeze the vein. The sensor should be approximately two fingers above the carpal bone. In the application settings, select the type of activity that you perform most often to optimize the frequency of sensor polling.
| Parameter | Impact on operation | Recommendation |
|---|---|---|
| User weight | Consumption calculation calories | Indicate with an accuracy of 0.5 kg |
| Step length | Accuracy of distance calculation | Measure with a tape measure or use auto-calculation |
| Target by steps | Motivation and notifications | Start with 5000, gradually increase |
| Time zone | Time synchronization | Enable automatic synchronization |
Don't forget to update these periodically data, especially if your weight changes during training. An outdated profile will lead to incorrect statistics, which can demotivate you in achieving your sports goals.
The accuracy of biometric data is 80% dependent on the correct input of anthropometry in the application, and not just on the quality of the sensor.
Configuration of notifications and system functions
One of The main function of a smartwatch is the ability to read messages without taking the phone out of your pocket. For this function to work stably, you need to go to the Notifications section in the companion application and activate the switches opposite the desired applications: WhatsApp, Telegram, SMS, calls.
However, simply turning on the toggle switch is often not enough. The Android system may "kill" the background process of an application to save memory, which is why notifications stop coming. You need to add the application to the battery exception list and pin it in memory.
Do the following: go to Phone settings → Applications → [Your watch application] → Battery and select mode No restrictions. Also enable autorun for this application in system settings. This ensures that the connection with the watch will not be interrupted when the smartphone screen is locked.
Why don’t I receive notifications from Viber or Instagram?
Often the problem lies in the fact that the messenger application itself does not have permission to show notifications in the status bar. Check the settings of the messenger itself: notifications must be turned on and visible on the phone's lock screen so that the watch can intercept them.
For users who value silence, the function Do not disturbis available. It can be set up on a schedule or activated manually through the quick access curtain on the watch. In this mode, vibration and screen backlighting for incoming events will be disabled.
Advanced settings and interface personalization
Appearance Smart Watch 9 Pro easily customizable. The app has an extensive watch face store where you can choose a design to suit any clothing style or mood. Some watch faces allow you to display complex data on the main screen, such as weather, heart rate or battery level.
It is also worth paying attention to the gesture settings. Raising your wrist to activate the screen is a convenient feature, but it can drain your battery if it's triggered too often by gestures. In the sensitivity settings, you can choose the level of response or completely disable this feature using only a touch of the screen or pressing a button.
⚠️ Attention: The interface and available functions may vary slightly depending on the firmware version. If you do not find the described option, check for software updates in the "About device" section.
For advanced users, setting up activity goals is available. You can set custom limits for steps, calories, and sitting time. When you reach a goal, the watch will vibrate and show a congratulations animation, which serves as a great incentive.
Use the "Find My Phone" function in the watch menu if your smartphone is lost in the house. The phone will start ringing loudly even in silent mode.
Possible problems and methods for solving them
Even with careful setup, technical failures may occur. The most common problem is time desynchronization. If your watch shows the wrong time, check whether the "Auto-sync time" option is enabled in the application. Usually it is enough to change the time on the phone for one minute and return it back to start the update process.
Problems with measuring heart rate are often associated with the tightness of the strap or the presence of tattoos on the wrist. The sensor's laser beam cannot penetrate the tattoo ink, resulting in reading errors. In such cases, it is recommended to wear the watch on the other hand or above the place where the design was applied.
- 🔋 Quick discharge: disable continuous heart rate monitoring and the Always On Display function.
- ❄️ The watch is frozen: hold down the side button for 10-15 seconds to force a reboot.
- 📡 No connection: remove the device from the application and pair again.
If none of the methods helps, the last resort is a factory reset. This will delete all data from the watch, but will restore its functionality in case of software errors. This operation is performed through the settings menu on the watch itself or through the app.
Why does the watch not charge or shows a charging error?
Check the contacts on the back of the watch and on the charging cable. They must be clean and dry. Try using another power supply with a current of no more than 1A (a standard computer USB port or an old 5V adapter). Fast chargers for smartphones may not work correctly with low-power watch electronics.
Is it possible to answer calls directly from the Smart Watch 9 Pro?
Yes, the model is equipped with a built-in microphone and speaker. You can receive calls and talk without taking out your phone, provided that the watch is within range of the Bluetooth connection with your smartphone.
How to reset all settings to factory settings?
On the watch, go to Settings → System → Reset. Confirm the action. After rebooting, the watch will be in “out of the box” condition and will need to be paired again.
Is the watch compatible with iPhone (iOS)?
Basic functionality (steps, time, notifications) works with iOS, but you will still need to download the app from the App Store to set it up. However, some Android-specific features may not be available.
What should I do if the application does not see the watch when scanning?
Make sure that the watch is not paired with another phone. If yes, break the connection there. Also check if the "Flight" mode is turned on on the phone and whether the GPS module is working.