Modern wearable gadgets have become an integral part of the mobile user ecosystem, and Wearfit Pro occupies one of the leading positions in the budget segment due to its wide functionality and affordable price. However, the process of initial device initialization often raises questions among owners of smartphones based on Android, especially given the variety of versions of the operating system and proprietary shells from different manufacturers.
Correct setup requires not just turning on Bluetooth, but also installing specialized software that acts as a bridge between the watch and the phone. Errors at the pairing stage can lead to notifications not being received and health data remaining unrecorded, so it is important to carefully follow the algorithm of actions.
In this material we will analyze in detail the entire path from unpacking to full data synchronization, paying special attention to the nuances of working with access rights in Android 10, 11, 12 and newer. You will learn how to avoid common mistakes and make your gadget work stably in conjunction with a smartphone.
Preparing the device and installing the application
The first step before setting up is to fully charge it smart watch. Many users ignore this point when trying to turn on the device with a factory charge, which often leads to a sudden shutdown during the firmware or pairing process. Connect the magnetic cable to the contacts on the back panel and wait until the logo or battery icon appears.
Next, you need to find and install the official application to control the device. Unlike many other brands, watches on a chip Realtek or Nordicusing the Wearfit Pro platform require specific software. Open Google Play Market on your phone and enter the name of the application in the search bar.
Please note that there may be clones or applications with similar names in the store. Download only the option that is recommended in the instructions for your watch or has the largest number of positive reviews and downloads. After installation, do not open the application immediately - first turn on the watch itself.
Before installing the application, make sure that GPS (geolocation) is turned on on your phone. In modern versions of Android, this is a prerequisite for Bluetooth Low Energy, which is used by the watch.
Launch the application only after you make sure that the watch is turned on and is in pairing standby mode. If you try to log into your account before turning on the watch, the system may give an initialization error or not find the device in the list of available ones.
Pairing process through the Wearfit Pro application
The main mistake of beginners is trying to connect the watch through the standard Bluetooth phone settings menu. Do this strongly not recommendedas direct pairing via the Android system often blocks the transfer of health and notification data. All synchronization must take place strictly within the application interface.
Open the installed application and register an account using your email or phone number. Registration confirmation usually comes in the form of an SMS or letter, which must be entered in the appropriate field. After authorization, go to the Device or My devices tab in the bottom menu of the interface.
Press the button Add device or the plus icon. The application will ask for permission to search for nearby devices - be sure to click "Allow". The name of your model should appear in the list of found gadgets, for example W80, W59 or simply Smart Watch.
- 📱 Make sure that old connections to the same watch are not saved in the phone's Bluetooth settings - if there are, delete them before searching.
- 🔋 Charge hours must be above 20% to consistently complete the pairing procedure without interrupting the connection.
- 📶 Keep the phone and watch at a distance of no more than 1 meter from each other during search and connection.
After selecting the device, a request to confirm pairing may appear on the watch screen (check mark or OK button). Click it and the application will complete the setup. If the connection fails the first time, try rebooting both devices and repeating the procedure.
☑️ Checklist before pairing
Setting up access rights and permissions in Android
The most critical stage on which the functionality of the gadget depends is providing all the necessary permissions for applications Wearfit Pro. The Android operating system, especially in versions 12 and higher, extremely strictly controls the access of third-party apps to system resources.
Go to Settings → Applications → Wearfit Pro → Permissions. Here you have to manually enable access to Contacts, Call Log, SMS, Location, Microphone and Memory. Without permission to access memory, the application will not be able to back up settings and update watch faces.
⚠️ Attention: If you are using a Xiaomi, Huawei or Honor smartphone, you will also need to go to the battery settings and disable power saving for the Wearfit Pro application. Otherwise, the system will “kill” the synchronization process in the background, and the watch will stop receiving notifications.
Pay special attention to permission to work in the background. Find the item Auto-start or Run in the background and enable it. This ensures that even when the phone screen is locked, the connection with the watch will not be interrupted to save energy.
Also check your notification settings. In the Wearfit Pro application itself there is a section Settings → Manage notifications. Here you need to activate the switches opposite those instant messengers and system events that you want to see on your wrist. Simply enabling them in the Android system is not enough - you need to give permission inside the application.
Calibrating the sensors and setting up the interface
After successful connection, you need to configure the user’s personal data for the pedometer and heart rate monitor to work correctly. In the Profile section, indicate your gender, age, height and weight. The calculation of calories burned and distance traveled depends on these parameters.
To increase the accuracy of heart rate measurements, it is recommended to perform calibration. Sit quietly, relax and run a heart rate measurement through the app, comparing the result with other medical devices if possible. In the measurement frequency settings, select the mode Automatic or set the interval to 10–30 minutes to balance accuracy and battery charge.
The watch interface can also be customized. through the app, you can download new watch faces from the online library. Select the design you like and press the button Install. The download process may take from 30 seconds to 2 minutes depending on the Internet speed and Bluetooth version.
| Setting parameter | Recommended value | Impact on operation |
|---|---|---|
| Pulse rate | Every 10 minutes | High accuracy, average battery consumption |
| Wrist lift | On | Screen lights up when viewed, increases consumption |
| System language | Russian / English | Determines the language of incoming notifications |
| Units of measurement | Metric (km/kg) | Standard for the Russian Federation and CIS countries |
Do not forget to periodically synchronize the data by swiping down on the main screen of the application. This will update statistics for the day and save history in the service cloud, if such a function is provided by your account.
Why may steps not be counted?
The step counting algorithm in budget watches often reacts to vibrations. If you are traveling in public transport or actively gesturing, steps may be added. To correct, calibrate the step length in your profile based on your actual height.
Solving problems with notifications and synchronization
One of the most common complaints from users is the lack of notifications from WhatsApp, Telegram or calls on the watch. If you have checked the permissions in the application, but messages still do not arrive, the problem may lie in the settings of Android itself.
In some shells (for example, MIUI or OneUI) there is a “Battery Optimization” or “App Sleep” function that aggressively terminates processes. You need to find the Wearfit Pro app in the list of optimized apps and exclude it from this list by adding it to exceptions or "Unrestricted access".
Also check if the Do Not Disturb or Silent mode is turned on on your phone. The watch duplicates the state of the phone: if the smartphone is silent, then the watch will not vibrate. Make sure that the volume of media and notifications on your phone is set at a sufficient level.
⚠️ Attention: After major Android updates (for example, the transition from version 13 to 14), permission settings may be reset. If notifications disappear suddenly, first of all, double-check access to notifications in your phone's system settings.
If your watch displays old data or the time is not synchronized, try performing a full connection reset. Remove the device from the application, remove it from the phone's Bluetooth menu, restart the smartphone and perform the pairing procedure again from the very beginning.
Additional functions and firmware updates
Manufacturers periodically release software updates for watches that correct errors and add new functions. You can check the availability of new firmware in the section Device Settings → Software update inside the application.
The update process requires a stable connection. Place your phone and watch next to each other and make sure the watch battery has at least 50% charge. Click the check for updates button and if a new version is found, start the installation. The watch screen may go dark or reboot - this is normal behavior.
Among the additional functions, it is worth noting music and camera control. The function Music control allows you to switch tracks on a phone located in another room, which is convenient during training. The camera function turns the watch into a remote shutter for selfies.
The stability of a smartwatch depends 90% on the correct power saving settings of the phone. Don't let the Android system force close the companion app.
Why won't the watch connect through the phone's Bluetooth menu?
Direct connection through the Bluetooth system menu only creates an audio or input profile, but does not activate the GATT data transfer protocol required for the application to work. This results in the watch being visible as a headset, but not transmitting steps or notifications. Always use the "Add device" button inside the Wearfit Pro app.
How to reset your watch to factory settings?
If your watch is frozen or not working correctly, find the item in the device menu (swipe right or click on the gear) Reset or Factory Reset. Confirm the action. You can also reset through the app by selecting the device and pressing Unlink devicewhich will automatically initiate a reset on the watch.
Can I answer calls on my Wearfit Pro?
Most models on the Wearfit Pro platform only support displaying the caller's number and a button to reset or accept the call. The conversation is conducted through the phone speaker, since watches often do not have a built-in microphone and speaker of sufficient power for full communication, with the exception of some premium models of the Pro series.
Why does the watch battery drain quickly?
The main reasons for rapid discharge: constant screen backlight, high heart rate measurement frequency (every minute), activated blood oxygen monitoring and constant vibration for every notification. Disable unused functions in the watch menu to extend battery life.