Owners of wireless headphones from third-party manufacturers that copy the design Apple AirPods Prooften encounter difficulties when controlling the device through the Android operating system. The lack of native integration typical of the Apple ecosystem forces users to look for alternative methods of control and configuration. Unlike original products, Chinese analogues require manual intervention to break old connections and work correctly with the new phone.
Independent resetting settings gadget is a critical step if you notice desynchronization of sound between channels or failure of the sensor to respond to touches. Software problems in budget chips are common, and a simple reboot often solves 90% of problems that arise. Understanding the physical principles of operation of the case and the headphones themselves will allow you to quickly return the device to operation without contacting a service center.
In this guide, we will examine in detail the mechanical and software methods of restarting, and will also touch on the intricacies of working with touch zones. You will learn how to correctly interpret the blinking indicators and what actions should be taken if the standard algorithm does not work. A competent approach to electronics maintenance extends battery life and maintains the stability of the Bluetooth connection.
Mechanical reset via case and pairing button
The most common and effective way to return the device to factory settings is to use a hidden button on the charging case. This method is similar to the procedure on original devices, but requires more precise adherence to time intervals, since controllers in copies may work slower. You need to place both headphones inside the case and leave the lid open to access the indicator.
On the back or inner surface of the case locate a small circular button, often recessed to prevent accidental presses. You will need a thin object, such as a toothpick or paper clip, to press it. Hold the button for 10-15 seconds while carefully observing the LED. At some point, the indicator should blink white, red, or change color, which signals the successful completion of the command Hard Reset.
⚠️ Attention: Do not release the button immediately after the first blink. In some models, the first blink means entering pairing mode, and a full reset occurs only after a long hold (more than 10 seconds), when the indicator blinks several times in a row.
After the indicator goes out or changes its glow, close the case cover and wait about 30 seconds. This time is necessary for the microcontroller inside the headphones to completely rewrite the configuration file. Then open the lid again - the device should go into search mode for a new phone, which will be indicated by a rapidly flashing indicator.
⚠️ Attention: If the case is completely discharged, the reset procedure may not be completed. Make sure that the case battery has at least a minimum charge, or connect it to a power source for 10-15 minutes before starting manipulations.
Soft reset via touch control
Many modern replicas AirPods Pro do not have a physical button on the case, relying solely on touch controls for all operations, including rebooting. In such models, manufacturers implement a special activation algorithm through touch zones. Typically, simultaneous or sequential pressing of the sensors on both headphones, located in the ears or outside the case, is required.
The standard procedure often looks like this: you need to press and hold the touch zones on both headphones simultaneously for 5-7 seconds, wait for a characteristic sound signal or voice prompt "Power Off", and then repeat the action to turn it on. However, to completely reset the pairing list, a more complex combination may be required, for example, pressing one of the headphones five times quickly.
It is best to find the exact sequence of actions for your model in the instructions, since there is no universal standard for Chinese OEM manufacturers. The method of triple tapping followed by holding on the fourth tap is often used. If the headphones make a specific squeak or quickly blink in different colors, then you are in reset mode.
Why does touch reset not always work?
Touch zones in budget copies may not be calibrated correctly. If you don't feel any response, try changing your finger position slightly or pressing slightly above/below the center of the earbud. Also, the reset may not work if the battery charge is critically low.
After performing a series of presses, place the gadget back in the case for a minute to record the changes. Then remove them and try connecting them to your smartphone as a new device. If the phone sees two separate devices with the same name instead of one, then the reset was successful, and now the headphones are ready to synchronize with each other again.
Deleting a profile and clearing the Bluetooth list on Android
One of the common reasons why a reboot does not help is the persistence of an old profile, “clogged” with errors, in the memory of the Android smartphone itself. The system may attempt to connect to cached data, ignoring the new headphone state. Therefore, before pairing again, you must completely remove the device from the list of previously used ones.
Go to the settings of your phone, go to the section Settings → Connections → Bluetooth. Find the name of your headphones in the list of your devices (often it is AiPods, Pro 4 or simply Wireless). Tap on the gear icon or hold the name to see the context menu and select the "Forget" or "Disable" option.
After deleting a profile, it is recommended to follow these steps to completely clear it:
- 📱 Turn off Bluetooth on your smartphone for 10-15 seconds, then turn it on again.
- 🔄 Reboot the phone itself to clear the system caches of Bluetooth services.
- 🔍 In the search mode for new devices, do not click on connect immediately, give the phone 5-10 seconds to be detected.
Only after these manipulations can you start the pairing process again. If you skip the step of clearing the phone's memory, it may automatically try to restore the old connection with erroneous parameters, which will negate all efforts to reboot the headphones themselves.
Completely removing the device from the phone's memory ("Forget device") is a mandatory step before re-pairing after a reset.
Specifics of working with the iTools application or analogs
For owners of Android smartphones, there are specialized assistant applications, such as AndPods, MaterialPods or Pods, which emulate the functionality of the original iOS interface. These apps allow you not only to see the battery charge, but also to soft reset the headphones if the physical button is missing or does not work.
By installing such an application from Google Play or a third-party source, you will have access to an advanced control menu. In some cases, the application may send a special signal to the headphones to force a reboot of the communication module. This is especially useful when standard methods do not produce results and the device behaves unstable.
However, it is worth considering that the functionality of such applications depends on the version of the chip installed in your copy. Cheap models on older chips may not support commands through third-party software. However, trying an app is a great way to diagnose battery health and see if your phone can see the headphones at a deep level.
Use apps like AndPods to check firmware version and sensor calibration, even if the main goal is just a reset.
Table of indicators and their meaning during reset
Understanding color indications are the key to successful diagnosis. Manufacturers use a standard, but not always obvious, color scheme to indicate status. Below is a table that will help you decipher the signals of your device during the reboot procedure.
| Indicator color | Blinking mode | Status value | Required action |
|---|---|---|---|
| White | Slow flashing | Pairing mode | Search for a device in the phone's Bluetooth menu |
| Red | Standing on | Low battery or error | Place on charge, check contacts |
| Orange/Amber | Fast flashing | Channel synchronization error | Perform a hard reset (Hard Reset) |
| Green | Steady on | Full charge / Successful pairing | You can use the device |
| White and Red | Alternating flashing | Critical error or reset | Repeat the reset procedure, check the case |
Please note that in some models of the "Chinese" versions, the color scheme may differ. For example, the color orange may be replaced by yellow, and a pulsating light may be used instead of flashing. Always check the visual behavior of the device at the time the command is executed.
Problem solving: what to do if the reset does not help
There are situations when even repeated execution of all the above actions does not lead to the desired result. The headphones continue to work incorrectly, do not see each other or do not connect to the phone. In such cases, the problem may lie deeper than just a software glitch.
First of all, check the cleanliness of the contacts. At the bottom of each earphone and inside the case there are metal coins for charging. Oxidation or contamination of these contacts may prevent the signal from being transmitted that the earphone is in the case, causing the reset button on the case to not work.
- 🧹 Wipe the contacts with a dry lint-free cloth or a cotton swab soaked in alcohol.
- 🔋 Leave the headphones in the case on charge for at least 1 hour, even if the indicator shows full charge.
- 📡 Check whether the headphones are connected to another device (tablet, laptop) in the background.
⚠️ Attention: If none of the methods helps, the Bluetooth module in one of the headphones may have failed. In cheap copies, this is a common problem, and it will no longer be possible to solve it programmatically - you will need to replace the module or the entire device.It is also worth considering that Android menu interfaces may vary depending on the OS version and the manufacturer's shell (Samsung One UI, Xiaomi MIUI, Stock Android). The location of menu items may change, so look for Bluetooth functions using keywords.
☑️ Diagnostics before buying new ones
Done: 0 / 5Why don’t the headphones see each other after the reset?
This is called TWS (True Wireless Stereo) desync. One earphone “forgot” the second. Repeat the reset procedure, but this time remove the headphones from the case not simultaneously, but after a pause of 2-3 seconds. Sometimes this helps the master earphone (usually the right one) to have time to seize the connection with the second one.
Is it possible to reset the settings without a case?
If the model does not have a touch reset, then it is almost impossible to perform a full Hard Reset without a case, since the button is physically located on the body of the case. You can try to discharge the headphones to zero and leave them lying discharged for a couple of days, but this does not guarantee results.
Does the Android version affect the reset process?
No, the reset process itself (pressing a button or touch combination) occurs at the headphone firmware level and does not depend on the Android version. However, the Bluetooth menu and connection stability may differ on different versions of the OS.
What does the indicator blink 5 times in a row mean?
Most often this is a signal that the headphones cannot find each other to create a stereo pair. Try putting them in the case, closing the lid, waiting 10 seconds and repeating the reset procedure, making sure that both headphones are firmly seated in the sockets.
Do I need to delete the iTools app before resetting?
No, third-party applications do not affect the hard reset. However, after the reset and new pairing, you may need to re-configure the access rights in the application if you plan to use it for battery monitoring.