The modern wearable electronics market offers many affordable solutions for health monitoring, and M3 fitness bracelet occupies one of the leading positions in the budget segment. This device allows you to track your heart rate, count steps, monitor sleep stages and receive notifications from your smartphone right on your wrist. However, the initial setup process often raises questions among new users, especially if they are encountering such gadgets for the first time.
Correct synchronization is the foundation for the correct operation of all tracker functions. If key steps are missed or the sequence of steps is not correct, the device may not transmit data or may become unstable. In this guide, we will go through each step in detail, from unboxing to full integration with your Android smartphoneecosystem. You will learn how to avoid common mistakes and customize the settings for yourself.
Preparatory stage before pairing
Before you start trying to connect gadgets, you need to perform a number of basic manipulations with the bracelet itself. Often the problem lies not in the phone, but in the fact that the tracker is simply not activated or is in deep sleep mode. Make sure that the device is charged at least 20%, since a low charge can block the operation of the Bluetooth module.
Turn on M3 Bandby holding down the touch button on the case until the welcome screen appears. If the screen does not light up, charge the device for 15-20 minutes. After turning on, the Bluetooth icon or QR code should appear on the display, which will be required for further setup. This is a critical point to begin the pairing process.
It's also worth checking the Bluetooth status on your phone. Go to settings and make sure the wireless module is active. Do not try to create a pair through the standard Bluetooth menu of the Android system - this is a common mistake for beginners. For correct operation, M3 requires special software that takes control of the connection.
- 🔋 Charge the bracelet to at least 20-30% before turning it on
- 📱 Activate Bluetooth and geolocation on your smartphone
- 🚫 Do not connect the device through the Bluetooth system menu
- 👆 Activate the tracker screen by pressing the touch zone
⚠️ Attention: If a QR code is displayed on the bracelet screen, do not try to scan it with a standard phone camera without first installing a special application. This may lead to you going to incorrect links or lack of response.
Reboot your smartphone before starting setup - this will clear the Bluetooth services cache and often solves problems with visibility of new devices.
Selecting and installing the right application
A key element of the M3 ecosystem is a specialized companion application. Without it, the bracelet turns into a regular watch with a pedometer, deprived of the ability to synchronize history and set up notifications. There are several versions of the software, but for the M3 model the most current and stable application is FitPro. It is this that provides the full functionality of the device.
The app should be downloaded exclusively from official sources to avoid malware or stripped-down versions. You can find the application in the Google Play Market by entering the name in the search, or scan the QR code displayed on the screen of the bracelet itself after turning it on. The second option is preferable, as it guarantees that you will download a version that is compatible specifically with your device revision.
After downloading, install the application and grant it all requested permissions. For correct operation activity tracker you need access to geolocation, contacts, call log and notifications. If you deny access during the installation stage, the call and message alert functions will not work, and you will have to configure them manually through the Android system settings.
Why does the application require access to geolocation?
Starting with Android 6.0, Bluetooth Low Energy (BLE), which is used in fitness bracelets, technically tied to permission to use geolocation. Without this right, the phone simply will not see the device when scanning.
| Function | Required permission | Consequences of failure |
|---|---|---|
| Synchronization of steps | Storage | History will not be saved |
| Notifications (SMS, WhatsApp) | Access to notifications | The bracelet does not vibrate |
| Search for device | Geolocation (GPS) | Cannot connect |
| Calls | Contacts and Phone | Name is not displayed |
⚠️ Attention: The FitPro application interface may vary slightly depending on the bracelet firmware version and Android versions. If you do not find the menu item you need, check the official user manual or update the application to the latest version.
The process of pairing the device with the phone
Now we move on to the most important stage - direct connection. Launch the installed application FitPro and register an account or log in as a guest (functionality may be limited). In the main menu, find the section responsible for adding devices. It is usually called "Device", "My Device" or has a bracelet icon.
Click the scan or search for devices button. Make sure that the bracelet is near the phone (no further than 1-2 meters). Your device identifier should appear on your smartphone screen, often denoted as M3 or a set of characters. Click on it to begin the pairing procedure.
After clicking, a request to confirm pairing may appear on the bracelet screen (check icon or vibration). Confirm the action by pressing the sensor. The application will begin synchronizing the time and basic settings. This process takes from 10 to 30 seconds. If the connection is lost, repeat the procedure, first turning Bluetooth off and on.
☑️ Checklist for successful connection
Successful connection is confirmed by the vibration of the bracelet and the display of data on the main screen of the application. Now you can see your progress in real time. It is important to understand that primary synchronization may require more time, as the system calibrates the sensors to your parameters.
The main rule: pairing is performed ONLY inside the FitPro application, and not through the Bluetooth settings of the smartphone itself.
Setting up a user profile and goals
In order for the data on calories burned and steps taken to be as accurate as possible, you need to correctly set up your personal profile. Algorithms for calculating energy costs are based on your weight, height, age and gender. Without this data, fitness tracker will use average values, which will lead to a significant error in reports.
Go to the profile settings section in the application. Please enter current information. You can also set a daily step goal here. The standard value is often 10,000 steps, but you can change this depending on your fitness level. Adequate goal setting motivates you to move more without causing excessive fatigue.
Sedentary lifestyle reminder settings are often available in this section. If you work in an office, turn on a feature that will make the bracelet vibrate every hour, reminding you to do a warm-up. This is a useful function for the prevention of problems with the spine and blood circulation.
- ⚖️ Enter your exact weight to calculate calories
- 📏 Enter your height to correct step length
- 🎂 Check your date of birth to calculate age-specific heart rate norms
- 🚶♂️ Set a realistic daily goal step by step
Configuration of notifications and calls
One of the most popular features of M3 is the ability to receive notifications about incoming calls and messages from instant messengers. For this function to work, it is not enough to simply connect the bracelet. You need to go to the "Device Settings" or "Notifications" section inside the FitPro application and activate the necessary switches.
Select those applications from which you want to see notifications on your wrist. This can be SMS, calls, WhatsApp, Telegram, Viber, Instagram and others. After activating the toggles, Android may ask for additional permission to "Access Notifications." You will need to find the FitPro application in the list of system permissions and allow it to read notifications.
Please note that the message text is only displayed if the notification itself has arrived on the phone. If you have Do Not Disturb mode turned on or the app is blocked in the background, the bracelet may not work. It is also worth setting up language packs, if the application has such an option, so that the Cyrillic alphabet is displayed correctly, and not as hieroglyphs.
⚠️ Attention: On some smartphone models (Xiaomi, Huawei, Samsung), the system aggressively closes background applications to save battery. Be sure to add FitPro to the exceptions or to the list of "Protected applications", otherwise notifications will stop coming 10-15 minutes after the screen is locked.
Working with health monitoring and sleep
M3 functionality includes heart rate monitoring and sleep phase analysis. To measure your heart rate, you need to press the bracelet firmly against your wrist so that the sensor on the back panel touches your skin. In the application, you can configure the automatic measurement interval: continuous, once every 10 minutes, or only on request. Continuous monitoring uses up battery power faster.
Sleep analysis occurs automatically. You do not need to turn on a special mode before going to bed - the device itself will determine the moment of falling asleep by the absence of movements and a decrease in heart rate. In the morning, the data is synchronized with the phone, showing the duration of deep and shallow sleep phases. This information is useful for adjusting your rest regimen.
Remember that the optical heart rate sensor has an error, especially with intense movements or if the bracelet is worn loosely. For high-impact workouts, readings may not be accurate. In such cases, it is better to use chest sensors, but for everyday monitoring heart rate monitor M3 it copes with its task.
Recommended heart rate measurement interval to balance accuracy and battery: 10-30 minutes.Solution common connection problems
Even if all instructions are followed, users may encounter difficulties. The most common problem is that the phone does not see the bracelet. In this case, first check if the device is connected to another phone. M3 can only support connection with one smartphone at a time. Unlink it in the application on your old device.
If the problem is not resolved, try clearing the FitPro application cache and restarting your smartphone. Another effective method is to completely reset the bracelet to factory settings through the device menu (usually the “Reset” or “Reset” item). After the reset, you will need to go through the connection procedure again.
Another nuance concerns Android versions. On very old versions (below 4.4) or on custom firmware, Bluetooth driver conflicts may occur. Make sure your operating system is updated to the latest version. If all else fails, try installing an alternative application that is compatible with the M3 chip, for example WearFit Pro, but the functionality may differ.
- 🔄 Unlink the device from other smartphones
- 🧹 Clear the application cache and restart the phone
- 🏭 Reset the bracelet to factory settings
- 📲 Check the compatibility of the Android version
What to do if the bracelet discharges quickly?
A common reason is that constant heart rate monitoring is turned on and the screen is brightly backlit. Try turning off continuous heart rate measurement, leaving only manual mode, and reduce the backlight time to 5-10 seconds.
Frequently asked questions (FAQ)
Can M3 be connected to two phones at the same time?
No, the Bluetooth Low Energy architecture in this device allows you to maintain an active connection only with one smartphone. To switch between phones, you need to unlink the device in the application on the first phone and link it on the second.
Why does the bracelet not show messages from WhatsApp?
Most likely, you did not give the FitPro application permission to read notifications in the Android settings or did not enable the WhatsApp switch inside the application itself. Also check to see if the app is running in the background due to the power-saving system.
Is the M3 Band waterproof?
The device is splash- and sweat-resistant, but is not intended for swimming, showering, or submersion. Moisture getting inside the case can damage the electronics, since tightness is not guaranteed by the manufacturer for water procedures.
How to update the bracelet firmware?
The update occurs automatically through the FitPro application if a new version is available. Typically, the notification appears in the About device section or when you launch an application. Do not disconnect the bracelet from the phone during the update.