Owning a smartphone Xiaomi or Redmi is often accompanied by a desire to optimize the operation of the system or solve accumulated software errors. Over time, the device accumulates cache, registry errors and application conflicts, which leads to poor performance. In such situations, the most effective solution is full reset to factory settingswhich returns the gadget to its “out of the box” state.
The procedure for clearing memory and flashing system partitions requires care and preparation, since it is irreversible. You will lose all your personal data, including contacts, photos and passwords, if you don't back it up in advance. Below we will examine in detail the two main methods of performing this operation: through the settings menu and through the mode Recovery.
You should not be afraid of the word “reset” if you follow the proven instructions. Modern shells MIUI i HyperOS have built-in protection mechanisms that prevent accidental deletion of data without owner confirmation. However, understanding the risks and the correct sequence of actions is the key to successfully completing the process without losing the warranty or functionality of the device.
Preparing the device for a full data reset
Before initiating the cleaning process, it is critical to perform a number of preparatory actions. Backup is the first and most important step that cannot be ignored. Use cloud services Google or built-in tool Mi Cloud to save contacts, SMS and call history.
Make sure the battery level is at least 50-60%. Interrupting the reset process due to a low battery may damage system files and prevent the operating system from loading. It is also recommended to remove SIM card and the memory card microSDto avoid accidental formatting of external media.
⚠️ Attention: If your device has Google Account Lock enabled, be sure to remember login and password for the Google account that was linked to the phone. After the reset, the system will require authorization into this particular account to confirm the owner’s rights. FRP (Google Account Lock), be sure to remember the login and password for the Google account that was linked to the phone. After the reset, the system will require authorization into this particular account to confirm the owner’s rights.
Check for important files in the downloads and instant messengers folders. Users often forget about saved documents in WhatsApp or Telegramthat are not automatically synchronized with the shared gallery. Transfer heavy videos and photos to your computer or external hard drive.
Before resetting, disable two-factor authentication for important banking applications, if possible, so as not to lose access to accounts after reinstalling the system.
Method 1: Reset through the MIUI settings menu
The most secure and simple method available to everyone to the user is to use the standard interface of the operating system. This option is suitable if the phone turns on, the screen responds to touches, and you can get to the main menu. The algorithm of actions may differ slightly depending on the version of the shell MIUI or HyperOS.
First, open the “Settings” application and scroll down the list to the “About phone” item. In some firmware versions, the required option may be located in the “Advanced Settings” section. Find the line "Reset settings" or "Erase all data".
- 📱 Click on the "Erase all data" button at the bottom of the screen.
- 🔒 Enter the pattern, PIN or screen unlock password to confirm your identity.
- ⏳ Wait until a warning appears that all data will be deleted deleted, and click “Next”.
- ✅ Confirm the action by clicking on the “OK” button or entering your account password Mi.
After confirmation, the phone will reboot and the cleaning process will begin. A logo Android or Redmi with a progress indicator may be displayed on the screen. Do not interrupt the power and do not press the buttons at this moment. The system will automatically delete the user partition and restore factory configurations.
☑️ Check before resetting through settings
Method 2: Reset via Recovery mode (Hard Reset)
If the smartphone does not turn on, is stuck on the logo or the touch screen does not respond, the method Hard Resetis used. This method uses recovery mode (Recovery Mode), which boots independently of the main operating system. Control in this mode is carried out using the volume and power buttons.
Turn off the device completely. Then hold down the volume up button (Volume Up) and the power button at the same time. Hold them down until the logo Miappears, then release the power button, but continue to hold the volume down until the menu appears Recovery.
In the menu Recovery navigation can be done differently: on some models you need to touch the screen, on others you need to use the volume buttons to move and the power button to select. Select the language (usually English or Chinese, if there is no English) and find the item Wipe Data.
| Menu item | Function | Impact on data |
|---|---|---|
| Wipe All Data | Full clearing of all partitions | Deletes everything (photo, contacts, applications) |
| Wipe Cache Partition | Clearing the system cache | Safe, user data is saved |
| Reboot | Rebooting the device | Exiting recovery mode |
| Connect with MIAssistant | Connecting to a PC for firmware | Used for deep recovery |
Select an option Wipe All Data and confirm the action. The process may take several minutes. After completion, the message “Data wiped successfully” will appear, and the device will offer to return to the main menu or reboot (Reboot).
⚠️ Attention: When resetting via Recovery on new models Redmi you may need to unlock the bootloader or enter your account password Mi directly in the recovery menu if the "Find device" function was is active.
What to do if the Recovery menu is in Chinese?
If you come across a global version with a Chinese Recovery menu, navigate by the or icons. Usually the confirmation button is on the right or bottom. Select the second button from the top in the list, then the confirmation button (often the bottom right) to start cleaning.
Initial setup after resetting the system
After the procedure is successfully completed, the phone will turn on as new. You will be greeted by a welcome screen with a choice of language. This stage is called settingConnect to the Wi-Fi network, as this is necessary to activate the device and check the security locks.
The system will offer to restore data from a backup. You can select a copy from Google Drive or Mi Cloud. If you created a backup before resetting, this step will allow you to restore contacts, settings and the list of installed applications automatically.
During the setup process, you will be prompted to log in. account Google. This is a mandatory security requirement. Android. Enter the details of the account that was the main account on this device before the reset to avoid blocking. FRP.
- 🌐 Accept the terms of use of Google services and the manufacturer.
- 🔐 Set up protection methods: add fingerprint or face.
- 📲 Decide whether to install antivirus and Google services (for some models).
- 🔄 Run a system update if prompted immediately.
Do not rush to install all applications at once. Let the system fully load background processes and complete database optimization. 10 to 30 minutes of active use. During this time, the phone may warm up slightly - this is a normal reaction of the processor to intensive work.
Typical problems and their solutions
Despite the simplicity of the procedure, users may encounter unexpected difficulties - reboot cycle (bootloop), when the phone constantly turns off and on. may indicate damage to system files or a hardware conflict.
If after a reset the phone writes “Device is corrupted” or requires unlocking the bootloader, the system files may have been changed before the reset. In such cases, you may need to flash the device via a computer using a utility. Mi Flash Tool.
There is also a problem where the touch screen stops responding immediately after a reset. Try performing a forced reboot by holding down the power button for 10-15 seconds. If the problem persists, you may need to replace the display or cable.
⚠️ Attention: The interface and location of menu items may change with the version update MIUI. If you do not find the items described, check the latest documentation on the manufacturer’s official website or in the “Services” application on the device itself.
In rare cases, mobile data or GPS may not work after a reset. Check your operator's access point (APN) settings. Often automatic settings are not applied, and you need to enter them manually or request resending the configuration from your telecom operator.
If after resetting the phone behaves unstable, do not rush to take it for repairs - try resetting it again, strictly following the instructions for charging the battery.
Optimizing Redmi performance after returning to factory settings
Now that your device Redmi is fast and stable again, it is important to configure it correctly to maintain that performance. Do not install dozens of applications from unverified sources at once. Security device directly depends on what software you install in the first hours.
Disable unnecessary advertising in system applications. In the settings MIUI there is an option msa (MIUI System Ads), which is recommended to be disabled for cleaner operation of the system. It is also worth checking the permissions for installed applications, denying access to the microphone and geolocation where it is not required.
Update your operating system regularly. The manufacturer releases security and optimization patches that improve battery performance and connection stability. Set up automatic updates via Wi-Fi to always be aware of the latest improvements.
- 🧹 Use the built-in Security app to clean up trash once a week.
- 🔋 Activate power saving mode for background applications.
- 🚫 Disable auto-start for heavy ones applications that you rarely use.
- 📶 Check your network settings and reset them to standard if you experience problems with the signal.
Following these simple rules will extend the life of the device and avoid the need to reset it again in the near future. A clean system is the key to long and fast operation of your smartphone.
Will the phone be reset if I forgot the pattern?
Yes, resetting via Recovery (Hard Reset) will remove the pattern, but only if Google account protection (FRP) is not activated on the device. After the reset, the phone will require you to enter the login and password of the Google account that was synchronized earlier. Without this data, you won’t be able to use the phone.
How long does a full factory reset on Redmi take?
The process of deleting data and formatting partitions usually takes from 5 to 15 minutes, depending on the amount of memory and the speed of the drive. However, the initial setup and indexing of files after switching on may take another 20-30 minutes.
Will the warranty expire after resetting to factory settings?
No, a soft reset through the standard menu or Recovery is a standard function of the operating system Android and does not violate the manufacturer's warranty. The warranty is lost only if you tamper with the hardware or flash it using unofficial methods to unlock the bootloader.
Is it possible to recover deleted photos after a reset?
Data recovery after a full reset (Wipe Data) is extremely difficult, since the encryption keys are erased. If you did not have a backup copy in the cloud or on your computer, it is almost impossible to return photos using standard means.