Modern smartphones, even in the budget segment, such as Flycan slow down over time. This is a natural process of accumulation of cache, residual files and conflicts of installed applications. Sometimes the user simply forgets the pattern key or PIN code that blocks access to the system. In such situations, the only effective solution is hard reset devices.
The reset procedure, known as Factory Reset, deletes all user information. This applies to photos, contacts, messages and downloaded apps. However, system files and pre-installed applications remain intact. Before starting the procedure, you need to clearly understand what you are losing and prepare for it.
In this article we will examine in detail several ways to perform this operation on brand devices Fly. We will look at the standard method through the settings menu, which is suitable for working phones. Methods for hard reset via mode will also be described Recovery for devices that do not turn on or are locked.
Preparing the device for the reset procedure
Before initiating memory clearing, it is critical to save the necessary data. After clicking the confirmation button, it will be impossible to recover deleted files without special equipment. Copy important photos and documents to your computer or cloud storage.
Make sure the battery level is sufficient. It is recommended to have at least 50-60% energy. If the phone turns off in the middle of the partition formatting process, this can damage the bootloader and turn the smartphone into a brick. Connect the device to the charger network for warranty.
Remember to log out of your account Googleif you plan to sell the phone or transfer it to another person. This will prevent the protection system FRP (Factory Reset Protection) from triggering, which will require entering a password from the previous owner after switching on.
⚠️ Attention: Resetting the settings is irreversible. Data is deleted instantly after confirming the action, and it is impossible to restore it using standard Android tools.
☑️ Preparing to reset Fly
Soft reset through the system menu
The safest and easiest way to return phone Fly to its original state - using the built-in interface. This method is suitable if the screen responds to touches and you remember the unlock password.
Go to the main menu and find the settings icon. Depending on the version Android, the path may differ slightly. Usually you need to go to the Recovery and reset or System → Reset settingssection. In older versions of firmware, this item may be in the “Personal Data” category.
A warning will appear on the screen about what data will be deleted. The system will list accounts, applications and files. Please read the list carefully. If you are confident in your decision, press the button Reset settings or Erase everything.
The phone will ask for final confirmation. After this, the device will reboot. The cleaning process can take from 5 to 15 minutes depending on the amount of full memory and the speed of the built-in drive.
Before resetting through the menu, take screenshots of important Wi-Fi settings and APN access points to quickly set up the Internet after turning it on.
Hard reset via Recovery mode
If the smartphone is frozen and does not respond to touch or you forgot the pattern key, you will need to use the engineering menu Recovery. This method works at the hardware level and does not require access to a working operating system.
Turn off the device completely. If the battery is removable, you can remove it for a few seconds and insert it back. Press and hold the power button and volume up button (Volume Up) at the same time. On some models Fly you may need to hold the volume down button.
When the logo Fly or the image of the Android robot appears, release the buttons. If you see a robot with an exclamation point, press the Power button once, and then hold it down and press the Volume button. You will be taken to a menu with a text interface.
Navigation in this mode is carried out with the volume buttons, and the selection is confirmed with the power button. Find the item wipe data/factory reset. Confirm your selection, then select Yes -- delete all user data to confirm.
⚠️ Attention: In Recovery mode, the touch screen does not work. Control is carried out exclusively by physical volume and power buttons.
Reset using a service code
There is an alternative method that does not require rebooting into special modes. It works by typing a special character sequence in the Phone app. This method is relevant if you have access to dialing a number.
Open the dialer and enter the code *2767*3855#. In some cases, the code ##7780##may work. Please note that on many modern versions of Android, these codes may be blocked by the manufacturer for security reasons.
If the code is active, the phone will immediately prompt you to confirm the reset. After pressing the confirmation button, formatting will begin. The device will reboot automatically.
Why may the code not work?
Smartphone manufacturers, including Fly, often disable the ability to reset via USSD codes in the latest firmware versions. This is done to prevent accidental deletion of data by scammers or children who have access to the phone. If the code does not work, use the settings or Recovery menu.
Using codes is the fastest method, but it is the least universal. Do not rely on it as the only option for rescuing a locked phone.
Table of keyboard shortcuts for different Fly models
The brand's model range Fly is extensive, and the key combinations for entering recovery mode may differ. Below is a table with the most common combinations for popular series.
| Series / Model | Button combination | Input features |
|---|---|---|
| Fly Life, Cirrus | Volume Up + Power | Hold until vibration |
| Fly Energy, Vista | Volume Down + Power | Release when the logo appears |
| Fly DS (old models) | Volume Up + Down + Power | Three buttons simultaneously |
| Fly IQ series | Volume Up + Power | You need to connect a USB cable |
If standard combinations do not work, try connecting the switched off phone to the computer with a cable, and then hold down the buttons. On some models, this is a prerequisite for entering Recovery.
Solving problems after a reset (FRP Lock)
After performing a hard reset and the first boot, the system may ask for owner confirmation. This is a function Google FRP. It requires entering the login and password for the Google account that was synchronized with the phone before the reset.
This is an anti-theft measure. If you have forgotten your account information, it will be extremely difficult to unlock your phone using legal methods. You will need Internet access to recover your password through another device.
In rare cases, when using custom firmware or non-standard reset methods, a download error may occur. If your phone is stuck on the logo Fly for more than 10 minutes, try to force restart it by holding the power button for 15-20 seconds.
⚠️ Attention: The interface and location of menu items may vary depending on the Android version (4.4, 5.1, 6.0 and higher). Always focus on the essence of the items, and not just their name.
Remember your Google account details before resetting. Without them, after turning on, the phone will turn into a useless piece of plastic due to FRP blocking.
Frequently asked questions
Will information be deleted from the SD memory card when resetting?
By default, when you select “Reset settings” in the menu, the system offers a “Empty SD card” checkbox. If you do not check this box manually, the data on the flash card will be saved. However, in Recovery mode, formatting often affects only the internal memory.
Is it possible to interrupt the reset process if it is frozen?
Interrupting the process is strictly not recommended, as this can damage the file system. If the progress bar does not move for more than 30-40 minutes, only then does it make sense to force a reboot with the power button.
Reset will remove Android system updates?
No, Factory Reset returns only user settings and data to the factory state. The operating system version and installed firmware updates will remain current.
What to do if your Fly phone is not included in Recovery?
Try different button combinations (see table above). Also make sure your phone is completely turned off and not in hibernation mode. Charge the device before trying.