Owners of smartphones Honor i Huawei often face a situation when the device stops reporting by voice that it is connected to the network or has reached a full charge. On a model Honor 9Athat runs a shell Magic UI (based on Android), this function may be disabled by default or may fail after the next system update. The voice assistant not only helps control the power process, but also saves time by eliminating the need to constantly check the screen.
The absence of a sound signal when connecting the cable can be misleading, especially if the connector is slightly loose or the contact is poor. You think that the phone is charging, but in fact the process is not. That is why activating the function voice guidance is an important element of the daily use of the gadget. In this article, we will analyze in detail all the ways to enable this option, from standard settings to hidden engineering menus.
Sometimes the problem lies not in the lack of settings, but in a conflict of third-party applications or a failure of system services. It's worth checking the basic accessibility settings before moving on to advanced methods. Below we will look at a step-by-step algorithm of actions that will help return your Honor 9A "voice".
Standard accessibility settings
First of all, you need to go to the main system settings menu. In the shell Magic UI the functions for voicing system events are often hidden in the accessibility section. Go to Settings and scroll down the list to item Accessibility. Tools for people with disabilities are concentrated here, but they are also useful for general customization of the interface.
Inside this section, find the subsection Improving visibility or Hearing, depending on the firmware version your device. We are interested in the option, which may be called “Voicing events”, “Voice prompts” or “TalkBack”. Be careful: turning on TalkBack completely changes the smartphone control logic, requiring double taps to launch applications.
⚠️ Attention: Activating TalkBack mode without first studying the instructions may block control by telephone. If you accidentally enabled this function and the screen began to speak with each touch, hold down the volume buttons at the same time for 3-5 seconds to quickly deactivate.
A safer option is to search for the item Voice the charge status in the menu Battery. On some software versions Honor 9A this setting is made separately. Go to Settings → Battery and carefully study the additional parameters by clicking on the three dots in the corner of the screen or the gear icon.
Using the “Lamp” application and system utilities
On brand smartphones Honor many system utilities are preinstalled that can duplicate notification functions. An application "Lamp" or system manager often has hidden settings for alerts. Open the applications menu and find the utility Phone Manager. Inside the section Notifications there may be a checkbox responsible for a voice report on power events.
It is also worth checking your profile settings HiAssistant (smart assistant). Although it is more often used for gesture control, its parameters sometimes include an option for speech response to system triggers. Go to Settings → Smart Assistant → HiAssistant and look for the switch associated with charging the device.
- 🔍 Check the “Special. capabilities" in the main settings.
- 🔋 Explore additional options in the "Battery" menu.
- 🤖 Open the settings of the HiAssistant smart assistant.
- 📢 Check the access rights for system applications in the "Applications" section.
If found using standard means the required switch failed, perhaps your firmware version is limited in functionality. In this case, it is worth considering the option of installing third-party software that emulates this function at the system level.
Third-party applications for voicing events
The most reliable solution for Honor 9Aif the built-in function does not work is to install a specialized application from the store Google Play or AppGallery. apps like Voice Charger or Battery Sound Notification are specially created to ensure that the phone speaks when the cable is connected. They are lightweight, do not require superuser rights and work in the background.
After installing such an application, you will need to grant it the necessary permissions. Typically this includes access to battery status and the ability to appear on top of other windows. In the settings of the application itself, you can select the voice language, voice (male or female) and the charge level at which the phrase will be pronounced.
Required permissions:1. Access to the device status (Battery Status)
2. Auto-start
3. On top of other applications (Draw over other apps)
It is important to configure autorun for such an application, otherwise the system Magic UI may “kill” the process to save energy. Go to Settings → Battery → Launch applications, find the installed utility and move the switch to the active position, allowing manual and automatic control.
☑️ Checking the operation of a third-party application
Adjusting charge levels and customizing phrases
One of the main advantages of using advanced settings or third-party applications is the possibility of flexible customization. You can configure your smartphone so that it reports not only the connection, but also specific percentages. For example, a voice warning when you reach 80% will help you disconnect the cable in time and extend the battery life.
In advanced utilities, you can record your own voice or select an interesting phrase. Standard messages like “Charging has started” can quickly become boring. Imagine the phone saying: “Energy is replenishing, captain!” or “It’s time to unplug me.” This adds individuality to the device.
| Event | Recommended action | Battery benefit |
|---|---|---|
| Cable connection | Voice confirmation | Contact control |
| Achieving 80% | Warning | Reducing Li-Ion wear |
| Achieving 100% | Shutdown signal | Preventing overcharging |
| Low charge (15%) | Alarm notification | Saving data |
Not worth it adjust the voice acting to each percentage, as this will lead to constant audio noise and unnecessary consumption of processor resources. It is optimal to select key points: start of charging, 50%, 80% and 100%.
For maximum benefit, set up a loud notification exactly at 80% charge. Modern lithium-ion batteries degrade faster if you constantly keep them charged at 100%.
Diagnosing problems with sound and speakers
Sometimes the settings are done correctly, but the phone is silent. In this case, the problem may lie in the hardware or media settings. Make sure that the mode Do Not Disturb does not block system sounds. Although charging alerts are usually classified as system alerts, some software versions may classify them differently.
Test the main speaker by playing any music track or video. If there is sound, but there is no charging notification, try changing the notification sound type in the settings of the selected application. Sometimes changing the tone to a sharper or louder one helps.
⚠️ Attention: If the speaker wheezes or the sound is very quiet even at maximum volume, dust or moisture may have accumulated in the speaker mesh. Do not try to clean it with sharp objects - use a soft brush.
It is also worth checking whether the sound of system events is muted in the volume profile. Press the volume button, expand the menu and make sure that the slider System or Notifications is not in the zero position.
Reset and update Software
If none of the methods helped return the voice function to Honor 9A, there may be a software failure in the system. In this case, it is recommended to check for firmware updates. Manufacturers often release patches that correct errors in the operation of accessibility and notification services.
Go to Settings → System and update → Software update and click the test button. If a new version is available, install it after backing up your data. After a reboot, many hidden functions can be activated automatically.
What to do if the update does not help?
If the software update did not solve the problem, you can try resetting to factory settings. Remember that this will delete all your data, photos and contacts. Before resetting, be sure to save important information to the cloud or to your computer. Path: Settings → System and update → Reset → Reset phone settings.
As a last resort, if the problem appeared after installing a specific application, try booting into safe mode. This will allow you to determine whether third-party software is blocking system notifications. To enter safe mode, hold down the power button, and then long-press the “Power off” option on the screen until the corresponding request appears.
Comprehensive approach: first check the built-in accessibility settings, then install a specialized application, and only if all else fails, consider resetting the settings.
Frequently asked questions (FAQ)
Why did the Honor 9A phone stop talking about charging after the update?
Firmware updates Magic UI sometimes reset accessibility settings to factory settings. Also, a new software version may change the path to the desired switch. Check the “Special Features” section again.
Is it possible to configure your voice to notify you about charging?
This is not possible using standard system tools. However, by installing a third-party application from the store (for example, Voice Charger), you can record your own phrase or select any available voice engine installed on the system.
Does voice charging affect battery consumption?
The influence is minimal and almost imperceptible. The processor spends a split second synthesizing speech when connecting the cable. The screen itself consumes much more energy if it lights up with every notification.
Does this function work if the phone is turned off?
No, voice notification only works when the device is on and the operating system is loaded. If the phone is turned off, you will only see the logo or charge indicator on the screen.