Increasing ringing is a function designed not to scare the smartphone owner with a sharp sound if he is in the next room. However, for many users this option becomes a real irritant, especially when it is impossible to miss an incoming call under any circumstances. You pick up the phone, and the sound is barely audible, and while you are looking for the answer button, the caller has already completed the call.
Fortunately, the operating system Android provides flexible tools to control this behavior. Depending on the manufacturer of your device - be it Samsung Galaxy, Xiaomi, OnePlus or pure Google Pixel - the shutdown algorithm may differ. In this article we will analyze all possible methods, from standard settings to hidden menus.
Sometimes the problem lies not in a software failure, but in the operating features of audio drivers specific firmware. So if you don't find the switch in an obvious place, don't get upset. We will look at solutions for different versions of the shell and tell you where to look for the treasured checkbox so that your phone rings immediately at full volume.
Why the call starts quietly and how it works
The function of gradually increasing the volume was introduced by developers with good intentions. The logic of the system is simple: if the phone is face down or in a pocket, a sharp loud signal can frighten the user. Increase algorithm smoothly raises the sound level from minimum to maximum within 15-30 seconds.
However, in real life, the scenarios for using gadgets are varied. Often the smartphone lies on the table with the screen facing up, and it is critical for the user to hear the very first impulse of the melody. This is especially true in noisy rooms or for people with hearing impairments. In such cases, Gradual Ringtone (this is the name of this function in the system code) becomes an obstacle, not a helper.
It is worth noting that the behavior of the call may depend on the selected melody. Some system ringtones have a built-in structure with a quiet intro, which creates the illusion that the fade-in function is working even if it is disabled. Therefore, before changing the settings, make sure that the audio recording itself starts with a loud sound.
⚠️ Attention: On some devices with custom firmware (for example, older versions of MIUI or ColorOS), the increase function can be “hardwired” into the system core without the ability to disable it through the menu. In such cases, only replacing the melody with a track with a sharp beginning helps.
Understanding the principle of operation audio profile will help you choose the right solution strategy. If the system forcibly ignores volume settings in the first seconds of a call, it means that a software limiter is active, which must be deactivated through special menus or third-party utilities.
Disable the function in standard Android settings
In most modern smartphones based on “pure” Android (versions 10 and higher) the option to control the increase is placed in a separate menu. To get to it, you need to be careful, since the item is often hidden in sections not directly related to sound.
First of all, open the “Phone” application (green tube). Click on the three dots in the top right corner or the gear icon to get to your call settings. Here you should look for the section Call settings or Advanced. It is in this block that the switch is often hidden Increasing call.
If the required item is not in the “Phone” application menu, try following the path Settings → Sound and vibration → Advanced. In some assemblies, for example Motorola or Nokia, this switch is located in the general sound settings, and not in the dialer parameters.
Pay attention to the version of your operating system. In Android 13 i Android 14 Google has changed the location of some menu items, moving the management of sound profiles to the Digital Wellbeing section or making them dependent on Do Not Disturb modes. Check to see if you have the Sleep or Rest mode active, which may force fade-in.
⚠️ Attention: The settings interface may vary depending on the manufacturer. If you do not find the switch in the described path, check the official documentation for your model in the support section, since manufacturers often change the menu structure in new updates.
Specific settings on Samsung smartphones
Shell One UI from company Samsung has its own unique menu structure, which often confuses users accustomed to the standard Android. Here, the ring escalation feature is tightly integrated with Do Not Disturb mode and audio profiles.
To turn off the escalation by Galaxy S or A-series, go to Settings → Sounds and vibration → Volume. Click on the three dots in the upper right corner of the screen and select Changing volume. Here you will see a time scale, but we are interested in another path.
A more reliable way is to go to Settings → Notifications → Advanced options. In some versions of One UI, the switch Increasing ringing is located here. If it is not there, check the section Do not disturb mode. In the settings of this mode there is an option “Block sounds”, which may conflict with the desired behavior of the call.
On Samsung smartphones, try changing the ringtone to the standard "Over the Horizon". It has a specific structure that often ignores software volume increases, starting to sound quite clearly right away.
Owners of flagship models may encounter a situation where the settings are reset after a firmware update. This is a known feature One UIthat requires re-checking the parameters after each major system update. It is also worth checking the application Good Lock and the module Sound Assistant, if it is installed - there are fine settings for the sound behavior for each application separately.
Solving the problem on Xiaomi, Redmi and POCO
Devices from Xiaomiworking on shell MIUI or new HyperOS, often have hidden settings that are not obvious at first glance. The problem of an increasing ringing can be solved here through the special features menu or gesture settings.
Go to Settings → Sound and vibration. Scroll down to the Advanced sound settingssection. There may be an item here Increasing ringer. If it is missing, go to Settings → Password and security → Accessibility.
In the accessibility section, find the item related to hearing. Sometimes the smooth volume increase function is tied to the option to help the hearing impaired. Disabling this function will return the melody to a sharp start. Also check the settings of the “Phone” application from MIUI: Settings → Incoming calls → Rising call.
| Model / Shell | Path to settings | Nuances |
|---|---|---|
| Xiaomi (MIUI 12-14) | Settings → Sound → Additional. settings | Often hidden in the submenu |
| Redmi (HyperOS) | Phone application → Settings | Depends on the firmware region |
| POCO | Settings → Password → Accessibility | Related to the mode for the hearing impaired |
| Black Shark | Game Turbo → Sound settings | May be blocked by game mode |
If you are using a global version of the firmware, the location of the items may differ from the Chinese version. In such cases, it is recommended to use the settings search. Enter the phrase increase or volumein the search bar so that the system itself suggests the desired section.
Using the engineering menu and codes
For advanced users who did not find the desired option in the regular menu, there is access to engineering menu. This is a hidden section of the system that allows you to manage hardware and software parameters at a deep level. It is accessed through a set of special codes in the “Phone” application.
Enter the code ##3646633## (universal for MediaTek) or #0# (for Samsung). In the menu that appears, select the tab Hardware Testing, then Audio. Here you can find your profile settings Normal Mode or LoudSpeaker Mode. Look for the parameter responsible for Ringtone Gain or Step Volume.
Risks of using the engineering menu
Changing parameters in the engineering menu without understanding their purpose can lead to complete muting of sound, audio distortion, or even “bricking” the device. It is recommended to back up your data before making changes.
Be extremely careful. Incorrectly changing the values in the fields Hex or Level may disrupt the operation of the audio chip. If you are not sure of your actions, it is better not to change the values, but just see if the increase parameter is active. For devices on processors Snapdragon the codes may differ, for example ##4636##, but there sound settings are less common.
An alternative option is to use ADB (Android Debug Bridge). By connecting your phone to your computer, you can enter a command to forcefully disable the growth service. This requires enabling USB debugging in the menu For developers. The command may look like settings put system volume_ringtone_mode 1, but its effectiveness depends on the specific model.
⚠️ Attention: The engineering menu is intended for service engineers. You make any changes at your own risk. The factory warranty may be voided if traces of tampering are detected in the system partitions.
Third-party applications for call control
If system means cannot solve the problem, applications from the store come to the rescue. Google Play. There are many utilities that intercept an incoming call and control the volume regardless of system settings. Such apps can force maximum volume from the first second of a call.
A popular solution is an application Volume Control or specialized call managers like Call Volume Control. Once installed, you will need to give the app permission to control your phone and change system settings. In the app interface you need to find the option Max volume on ring and activate it.
- 📱 Volume Control: Allows you to create volume profiles and forcefully turn up the sound during a call.
- 🔔 Ringtone Manager Plus: Allows you to edit the meta-data of melodies, removing the smooth intro.
- ⚙️ MacroDroid: Powerful an automation tool where you can create a macro: “When there is an incoming call → Set the ringer volume to 100%.”
Using macros via MacroDroid is the most reliable software method. You create an "Incoming Call" trigger and a "Change Volume" action. The delay is set to 0 seconds. This works on most devices, even if the system setting is blocked by the manufacturer.
☑️ Setting up a macro in MacroDroid
Remember that third-party applications consume additional battery power, as they work in the background, constantly monitoring the status of the phone. Choose lightweight utilities with good reviews so as not to slow down your smartphone.
Replacing melody and audio hacks
Sometimes the problem is solved not by changing the settings, but by replacing the sound source itself. System melodies are often optimized for the build-up function: they have a long, quiet introduction. If you play a track that starts with a sharp beat or loud sound, the build-up effect will become unnoticeable or the system will ignore it altogether. Try downloading the ringtone in a high bitrate format. Edit it in any audio editor on your phone (for example
Try downloading a ringtone in the format MP3 with high bitrate. Edit it in any audio editor on your phone (for example, Ringdroid), cutting off the quiet intro and making the loud part start at 0 seconds. Set this file as the main ringtone.
This method is especially effective on devices where software disabling the function is not possible due to regional firmware limitations. The physical structure of the sound wave dictates its conditions, and the rise algorithm simply does not have time to work before the sound reaches its peak.
The fastest way to bypass the rise without permissions is to use a melody with a sharp start. The system algorithm cannot make a sound that was initially recorded at maximum volume from the first millisecond quiet.
It is also worth checking the file format. Some older formats, such as MIDI, may be played back differently by the system synthesizer than digital recordings, which also affects the perceived start-up volume. Experiment with different file types to find the best option for your model.
Frequently asked questions (FAQ)
Why did the ringing increase again after an Android update?
With major system updates (for example, the transition from Android 12 to 13), settings are often reset to factory settings. default. The manufacturer believes that the ramp-up function improves the user experience, so it activates it automatically. You will have to go through the settings path again and disable this option manually.
Can Do Not Disturb affect call volume?
Yes, Do Not Disturb (DND) mode can have its own audio behavior settings. In some cases, it blocks sharp sounds or applies its own rising rules so as not to disturb the user. Check the exceptions in the settings of this mode and make sure that there are no special rules set for calls from selected contacts.
Does the case affect the operation of the speaker and the perception of the call?
Thick silicone or leather cases can muffle the sound of the speaker, especially at the start, when the volume has not yet reached its peak. This makes the ramp-up effect seem more pronounced. Try removing the case and check whether the perception of the volume of the first seconds of the call changes.
How to remove the rise only for specific contacts?
Unfortunately, the system setting of the ring rise is usually applied globally to all incoming calls. You cannot separate settings for different contacts through the standard menu. However, you can assign different melodies to different contacts: for important ones - tracks with a sharp start, for others - regular ones.
Is it safe to use applications like MacroDroid for this purpose?
Yes, it is safe. Such applications do not require root access and work within the standard Android API. They simply send a command to the system to change the volume when a certain event occurs. The only negative is a slight increase in battery consumption due to background activity.