How to completely reset a Huawei phone to factory settings: a detailed guide

Resetting the phone Huawei to factory settings is a radical, but sometimes necessary step. This may be necessary when selling a device, after a virus attack, during critical system failures, or if the gadget has become unbearably slow. The procedure deletes all user dataincluding photos, contacts, messages and installed applications, returning the smartphone to its out-of-the-box state.

However, not everyone knows what is on devices Huawei (especially models with EMUI 9.0 and later) there are nuances: from mandatory linking to an account Huawei ID to features of working with Recovery Mode. In this article, we will look at three official methods resetting, tell you how to prepare for the procedure, and warn against typical mistakes that can turn your phone into a brick.

⚠️ Important: If you reset Huawei before selling, do not forget unlink your Huawei ID account —otherwise the new owner will not be able to activate the device!

Preparing for the reset: what you must do before you start

Resetting to factory settings is an irreversible process. Even if you plan to restore your data from a backup, some files (such as game saves or application settings) may be lost forever. Here is a checklist of required actions:

Pay special attention Huawei ID account. After the reset, the system may require you to enter the details of the last linked account to unlock (FRP Lock). If you have forgotten your password, restore it in advance on the official website Huawei.

For backup, use:

• 📱 HiSuite — official software from Huawei for PC (saves contacts, SMS, photos, applications).
• ☁️ Huawei Cloud — up to 5 GB free, but does not synchronize all data.
• 🔄 Google Account —if Google services are installed on your phone (this is not possible on new models without GMS).
• 💾 Manual copying —transfer files to a computer or external drive via a USB cable.

⚠️ Attention: On models Huawei P30 Pro, Mate 20 and newer, reset via Recovery may require you to enter your account password, even if you have disabled it in the settings. This is a security measure Factory Reset Protection (FRP).

Method 1: Reset through the settings menu (the most secure)

This method is suitable if the phone turns on and you remember the pattern or PIN code. The interface may differ slightly depending on the version EMUI, but the general logic remains the same.

Step-by-step guide:

1. Open Settings (gear icon on the main screen).
2. Go to section System and updates → Reset.
3. Select Reset settings (or Restore and reset on older versions).
4. Click Reset all settings → Reset phone.
5. When prompted, enter PIN code or password from the lock screen.
6. Confirm the action by pressing Reset (on some models you will need to enter the password from Huawei ID).

The phone will reboot and begin the cleaning process, which will take from 5 to 15 minutes. Upon completion, you will see the initial setup screen, as after purchase.

Method 2: Hard reset via Recovery Mode (if the phone does not turn on)

If Huawei hangs on the logo, does not respond to touches or is locked, resetting via mode). recoverywill help. This method is also used if you have forgotten the pattern key (but remember the data from Huawei ID).

Instructions for most models (P20, P30, Mate 10/20/30, Nova etc.):

1. Turn off the phone (press and hold the power button for 10 seconds if it is frozen).
2. Press simultaneously Volume up + Power and hold 10–15 seconds until the logo appears Huawei.
3. Release the buttons - you will see the menu eRecovery (on new models) or classic Recovery (on old).
4. In the menu eRecovery select Download latest version and recovery (if you need to reinstall the firmware) or Wipe data/factory reset (to reset).
5. Confirm the action by selecting Yes or Wipe data.
6. After completion, select Reboot system now.

⚠️ Attention: On some models (Huawei Y6, Y7) to enter Recovery the combination is used Volume down + PowerIf the first method did not work, try it.

What to do if Recovery Mode does not open?

If after holding the buttons the phone vibrates, but the menu does not appear, try:

1. Connect the charger (sometimes the reset is blocked when the charge is low).

2. Use the combination with the button Volume down.

3. On models with EMUI 10+ it may be necessary first hold Volume up, then connect the USB cable to the PC, and only then hold Power.

Method 3: Reset via HiSuite (if the phone is connected to a PC)

The official utility HiSuite allows you to reset Huawei to factory settings via a computer. This is convenient if the sensor does not work or you prefer to control the process from a PC.

Step-by-step guide:

1. Download and install on your computer (Windows or Mac). data-i="149">USB Debugging HiSuite to your computer (Windows or Mac).
2. Connect your phone to PC via the original USB cable.
3. Turn it on on your phone USB Debugging (Settings → About phone → Build number (press 7 times) → For developers → USB Debugging).
4. Launch HiSuite and wait until the app recognizes the device.
5. Go to section System Restore → Reset to factory settings.
6. Follow the instructions on the screen (you will need to confirm the action on your phone).

The advantage of this method is the ability to create a backup right before the reset. However. Please note that HiSuite does not save:

• 🔐 Wi-Fi passwords.
• 🎮 Game saves (if they are not linked to an account).
• 📁 Settings for some system systems applications.

What to do after the reset: setup and unlocking

After a successful reset, the phone Huawei will start in initial setup mode. You will need to:

1. Select the language and region.
2. Connect to a Wi-Fi network (required for activation).
3. Login to the account Huawei IDthat was linked before the reset (if enabled FRP).
4. Restore data from a backup (if created).

⚠️ Critical error: If you forgot the data from Huawei ID, the phone may remain blocked! In this case:

• Try to recover your password through official website.
• If your account cannot be restored, contact Huawei service center with documents on your phone.
• Do not use "FRP bypass" through third-party apps - this can lead to loss of warranty or damage to the firmware.

On models with EMUI 11+ after the reset, a confirmation request may appear via SMS or email. Make sure that you have access to the linked number or email.

Typical errors and their solutions

Even when following the instructions, users encounter problems. Let's look at the most common ones:

Error	Possible cause	Solution
Reset is interrupted at 25-50%	The system partition is damaged or missing places	Try resetting via Recovery or reflash the phone via HiSuite
After the reset, the phone asks for the old PIN code	Activated FRP Lock	Enter the data from the last linked one Huawei ID
Does not open Recovery Mode	Wrong button combination or low battery	Charge the phone to 30% and try again with another button combination
HiSuite does not see the phone	Missing drivers or USB debugging is not enabled	Install the drivers from the official website and check the developer settings

If the phone after resetting does not turn on or freezes on the logo, this may indicate damaged firmware. In this case:

1. Try to reflash the device via eRecovery (select Download latest version).
2. Use SD card with firmware (instructions are on the forums 4PDA or XDA Developers).
3. Contact the service center - independent intervention may aggravate the problem.

Reset on specific models: features

Some phones Huawei have unique nuances when resetting. Let's consider the most popular models:

Huawei P40 / P40 Pro (EMUI 10.1 and later):

• 🔄 Reset via Recovery requires entering the password from Huawei IDeven if FRP is disabled.
• 📱 To log in Recovery use the combination Volume up + Power, but release the power button immediately after vibration.

Huawei Mate 30 Pro:

• 🔒 After the reset, confirmation via biometrics (fingerprint or face) may be required.
• ☁️ Backup via HiSuite is unstable - it is recommended to use the cloud Huawei Mobile Cloud.

Huawei Y6 / Y7 (2019–2021):

• 🔋 Reset via Recovery may be interrupted if the battery charge is below 20%.
• 🛠️ On these models, the "No command" error is often encountered in Recovery — in this In case, repeat the login by holding the buttons longer (20+ seconds).

💡 Tip: Before resetting, check the version EMUI in the settings (About phone → EMUI versionInstructions for specific firmware versions are often posted on the forums.

FAQ: Frequently asked questions about resetting Huawei

How to unlink Huawei ID before selling your phone?

Go to Settings → Huawei ID → Account Management → Delete accountEnter your password and confirm deletion. reset to factory settings. If you do not unlink the account, the new owner will not be able to activate the phone!

Is it possible to reset Huawei without losing data?

No, a full reset always deletes user data. However, you. you can select Reset settings (without deleting files) in the menu Settings → System → Reset, but this will not return the phone to its factory state.

What to do if after resetting, the phone asks for the old PIN code?

This works Factory Reset Protection (FRP). Enter the data from the last linked one. Huawei ID. If you don’t remember the password, restore it on the website Huawei ID or contact the service center with documents for the phone.

How long does the reset take?

Usually from 5 to 20 minutes, depending on the model and amount of data. If the process takes more than 30 minutes, do not interrupt it - this may damage the system.

Is it possible to reset Huawei via Google Find My Device?

No, Huawei Google does not support this function. For remote reset, use the service Huawei Mobile Cloud (preliminary setup is required).

If your question is not covered in the article, check the phone model and version EMUI - this will help you find the exact one solution.