Where in Android to enter the code to transfer data to iPhone: step-by-step guide

Transferring data from a smartphone to Android to a new one iPhone is often accompanied by confusion at the stage of entering the migration code. Users get lost in the application interface Move to iOS, not understanding where exactly the field for entering the six- or ten-digit code generated iPhoneappears. This article will look at all the nuances of the process: from preparing devices to finding a hidden window for the code, which many people miss due to its non-obvious location.

The peculiarity of the process is that the code is generated iPhone during setup, but it must be entered on the Androiddevice - and it is this point that causes most errors. We'll analyze typical scenarios (including cases where the code doesn't appear), consider alternative transfer methods without Move to iOS, and provide a checklist for checking device compatibility. Special attention is paid hidden mode "Data Transfer" in new versions Android 14+, where the code window can be disguised as system notifications.

Preparing devices before data transfer

Before you look for the code field, make sure that both devices meet the minimum requirements. On iPhone must be installed iOS 15.5 or newer (for stable operation Move to iOS), and on Android a version not lower than Android 9.0. If your Androidsmartphone was released before 2018, check the application support through the official page on Google Play.

Critical preparation points:

• 🔋 The charge of both devices must be at least 50%. If discharged during transfer, the data may be damaged.
• 📶 Connect both phones to the same network Wi-Fi (do not use mobile data!). The application creates a direct access point, but initial synchronization requires a shared network.
• 🧹 On Android free up at least 4 GB of memory - temporary transfer files take up a significant amount of space.
• 🔒 Disable VPNs, firewalls and antiviruses (for example, Avast or Kaspersky), which may block data transfer.

On iPhone transfer is only possible during Initial setup (after reset or when first turned on). If the device is already configured, you will have to reset it via Settings → General → Transfer or reset → Erase content and settings. An alternative is to use cloud services (Google Drive, iCloud), but they do not transfer some types of data (for example, call history).

Where exactly in Android does a field for entering a code appear?

Field for entering a code from iPhone appears in the application Move to iOS at the stage of connecting devices. Here is the exact sequence of actions:

1. On iPhone When setting up, select Transfer data from Android.
2. On Android open the application Move to iOS and press Continue → Accept the terms.
3. On the screen Find code click Next —an input field will appear here.
4. On iPhone wait for the code (6 or 10 digits) to appear and enter it on Android.

Important: the code field may not appear if:

• 🔄 You wait too long on the screen Find code (timeout - 2 minutes).
• 📡 The devices are connected to different Wi-Fi networks.
• 🔒 On Android the energy saving mode is turned on, blocking the background activity.
• 📱 The application Move to iOS works in the background (you need to open it again).

What to do if the code does not appear on the iPhone?

If iPhone does not generate the code, check:

1. On the screen Data Transfer on iPhone the message “Waiting for connection” should be lit.

2. Reboot both devices and try again.

3. Make sure that iPhone mode is turned off On an airplane and Bluetooth is turned on.

4. If you use eSIM, temporarily install a physical SIM card - some operators block direct data transfer.

In new versions Android 14 i iOS 17 The application interface has changed: the code field can now appear as a pop-up window on top of the main screen. If you do not see it, check notification panel - sometimes the system notification from Move to iOS contains a button to enter the code.

Step-by-step guide: from code to completion of the transfer

After successful After entering the code, data transfer will begin. Here's what happens at each stage:

Stage	Action on Android	Action on iPhone	Time
1. Connection	Entering the code in Move to iOS	Displaying the code on the screen	1–2 minutes
2. Selecting data	Selecting categories (contacts, photos, messages)	Waiting for transfer	3–5 minutes
3. Transfer	Data Transfer screen with progress bar	Progress bar on the settings screen	10–60 min
4. Completion	Message "Transfer complete"	Continue setting up iPhone	1–2 minutes

During the transfer:

• 🚫 Do not lock the screen on Android —this will interrupt the process.
• 🔌 Do not connect devices to charging via a USB hub (use original cables).
• 📶 Do not switch to mobile data - only Wi-Fi.
• 🔄 If the progress bar is stuck on 100%, wait 10 minutes before restarting.

Install Move to iOS on Android|Charge both devices >50%|Connect to the same Wi-Fi network|Disable VPN and antiviruses|Reset iPhone to factory (if already configured)-->

After the transfer to iPhone check:

• 📞 Contact (open the application Contact).
• 📷 Photos and videos (folder Transferred from Android to Photo).
• 💬 Messages (SMS only; WhatsApp transferred separately).
• 🎵 Music and books (not all formats are supported).

Less than 5 GB|5–20 GB|20–50 GB|More than 50 GB|Did not transfer-->

Errors when entering code and their solutions

If the code is not accepted or the input field does not appear, the reasons may be as follows:

⚠️ Attention: Codes in Move to iOS valid for 5 minutes. If you enter the wrong code 3 times in a row, the application will block attempts for 1 hour.

Common errors and how to fix them:

• 🔢 Code incorrect: Make sure you enter the numbers with iPhone, and not from the screen Android. Sometimes the numbers 0 and O or 1 and I are confused.
• ⏳ Code has expired: On iPhone click Can't connect? → Skip this step, then go back and generate a new code.
• 📵 There is no input field: Reinstall Move to iOS on Android and try again. In some firmware (for example, MIUI or ColorOS) the application may conflict with the system ones services.
• 🌐 Network error: Disable the Android option Adaptive Wi-Fi in the network settings.

For devices with Android 13+ and iOS 16+ Apple has implemented an additional compatibility check. If a message appears after entering the code Failed to connect to the device, try:

1. On Android go to Settings → Applications → Move to iOS → Permissions and enable all permissions (camera, storage, location).
2. On iPhone disable Data limits in Wi-Fi settings.
3. Use access point mode on Android: turn on the mobile hotspot and connect to it iPhone.

Alternative transfer methods without code

If Move to iOS does not work, consider alternative methods:

Method	What data is transferred	Limitations
Google Account	Contacts, calendars, mail, notes	Does not transfer SMS, applications, photos in original quality
Smart Switch (Samsung)	Photos, videos, music, messages	Only for devices Samsung → iPhone (via PC)
iCloud (web version)	Photos, contacts, reminders	5 GB limit without a paid subscription
Wired connection (Mac/PC)	Photos, videos, documents	Requires Android File Transfer or iTunes

To migrate WhatsApp use the official migration tool (available from iOS 15.5):

1. On Android update WhatsApp up to the latest version.
2. On iPhone install WhatsApp and log in to the same account.
3. Follow the instructions in the application to transfer chats.

Transfer data to iPhone after setting up (if the code is not entered on time)

If you have already set up iPhone and skipped the transfer step, there are two options:

1. Reset iPhone:
   • Go to Settings → Basic → Transfer or reset → Erase content and settings.
   • After resetting at the setup stage, select Transfer data from Android.
2. Manual transfer:
   • Contacts: export them to .vcf to Android and import via iCloud.com.
   • Photos: upload to Google Photosthen download to iPhone.
   • Applications: install manually from App Store (game data will not be transferred).

⚠️ Attention: When resetting iPhone all data added after the initial setup will be deleted. Make a backup copy to iCloud or to your computer.

To transfer music from Spotify or YouTube Music log in to the same accounts on iPhone —playlists are synchronized automatically. Local tracks (for example, in format .mp3) will have to be transferred via cloud storage or wired storage. connection.

Frequently asked questions and myths about data transfer

Let's look at common misconceptions:

Is it possible to transfer data from Android to iPhone without Wi-Fi?

No, Move to iOS requires a Wi-Fi connection to create a direct connection between devices. An alternative is to use a mobile hotspot on Android and connect to it iPhone, but this is less stable.

Are passwords transferred from Google Chrome to Safari?

Yes, but only if on Android Password synchronization is enabled in Google Account. On iPhone go to Settings → Passwords → Import passwords and select Google Chrome.

Why were the photos transferred in low quality?

The application Move to iOS compresses photos to speed up transfer. To transfer originals, use Google Photos (select "Original" quality) or a wired connection to a PC.

Is it possible to transfer data from Android to iPhone via Bluetooth?

No, Move to iOS uses Bluetooth only for initial synchronization, and the data itself is transmitted over Wi-Fi. Transferring large volumes via Bluetooth is not possible due to protocol limitations.

What to do if the transfer is interrupted by 99%?

This is a typical error when transferring large files. Try:

1. Restart both devices.
2. Split the data into parts (for example, transfer photos first, then contacts).
3. Use an alternative method (for example, Google Drive).

Conclusion: the optimal transfer method

For most users Move to iOS remains the most convenient way, despite possible errors with the code. The main thing is to monitor:

• 🔄 Compatibility of OS versions (update both devices).
• 📶 Stability of the Wi-Fi connection.
• 🔋 Battery charge.
• 📱 No background processes interfering with the transfer.

If you only need to transfer certain types of data (for example, just contacts or photos), alternative methods (Google Account, iCloud) may be easier. For a complete migration while preserving the folder structure and metadata, it is better to use a combination of Move to iOS (for system data) and manual transfer (for multimedia).