Gamepads Ritmix have long established themselves as a budget but high-quality alternative to branded controllers for mobile games. However, many users encounter difficulties when connecting the joystick to their smartphone for the first time - the device is not detected, the buttons do not work correctly, or the connection is constantly interrupted. In this article we will analyze all the current methods of synchronization, starting from the standard Android — the device is not detected, the buttons do not work correctly, or the connection is constantly interrupted. In this article we will analyze all current synchronization methods, starting from standard Bluetooth-connection and ending with workarounds for older smartphone models.

Features of gamepads Ritmix (for example, popular models Ritmix RGP-100, RGP-200 or RGP-400S) is that they often require additional settings even after successful connection. Unlike original controllers Xbox or DualShock, here you may need to manually bind buttons or install specialized applications. We tested all methods on smartphones Android 10–14 and identified key nuances that are not written about in standard instructions.

If you have already tried to connect a joystick and encountered an error "Device not supported" or the buttons refuse to respond in games - do not rush to blame the gamepad. In 80% of cases, the problem lies in the smartphone settings or a firmware conflict. Below you will find step-by-step solutions for each situation, including unique ADB binding method for non-rooted devices.

1. Preparing the Ritmix joystick for connection

Before connecting the gamepad to your smartphone, you need to put it in “pairing mode”. For models Ritmix this process may differ - it all depends on the generation of the device. For example, in RGP-100 to activate the search you need to hold down the button Home + Start, and in RGP-400S - only Share.

General preparation scheme:

  • 🔋 Make sure that the gamepad is charged (the indicator should light green or flash when pressing buttons). If the joystick is low, connect it to the charger for 10–15 minutes - some models do not turn on when the charge level is below 20%.
  • 🎮 Turn off the gamepad (if it was turned on) by long pressing the button Power (3-5 seconds).
  • 🔍 Activate pairing mode:
    • For RGP-100/RGP-200: hold Home + Start 5-7 seconds until the blue indicator flashes.
    • For RGP-400S/RGP-500: press and hold Share (or Select) until flashing.
    • For RGP-300: combination L1 + R1 + Start.
  • ⏳ Wait until the indicator starts flashing quickly (usually blue or red-blue). This is a signal that the joystick is ready to connect.
⚠️ Attention: If the indicator flashes red or does not respond to button combinations, reset the gamepad to factory settings. To do this, find the small button Reset on the back panel (you may need a paperclip) and hold it for 10 seconds.

Some models Ritmix (for example, RGP-150) have a mode switch X-Input/D-Input on the rear panel. To connect to Android select position D-Input —this will ensure better compatibility with most games. In X-Input mode, the gamepad can be detected as Xbox controller, but some of the buttons will not work correctly.

2. Connecting via Bluetooth: step-by-step guide

The most common connection method is via Bluetooth. It works on all smartphones with Android 6.0 and higher, but may require additional actions for stable operation.

Connection algorithm:

  1. Open the smartphone settings and go to the section Bluetooth.
  2. Activate Bluetooth (slider in top position).
  3. Click "Add new device" or "Search for devices".
  4. In the list, find the name of your gamepad (usually Ritmix RGP-XXX or Gamepad).
  5. Select the device and confirm pairing. If you are asked for a PIN code, try entering 0000 or 1234.

After successful connection, the indicator on the joystick should stop flashing and glow solid blue. However, two typical problems may arise here:

  • 🔄 The gamepad connects, but immediately turns off: Try disabling Bluetooth power saving mode in battery settings (Settings → Battery → Energy saving → Bluetooth).
  • 🎮 Buttons do not work in games: install the application Octopus or Mantis Gamepad Pro for manual binding of controls.

The indicator on the gamepad is lit steadily|The gamepad is displayed in the list of connected Bluetooth devices|The Home button responds to pressing (vibration or sound)|The test application (for example, Gamepad Tester) displays presses-->

If the smartphone does not find the gamepad, try:

  • 📱 Restart the phone and joystick.
  • 🔌 Connect the gamepad to another device (PC or tablet) to check its functionality.
  • 🛠️ Update the smartphone firmware - in older versions of Android (below 8.0) there may be no drivers for some models Ritmix.
⚠️ Attention: On some smartphones Xiaomi and Realme function Bluetooth Low Energy (BLE) may conflict with gamepads. Disable it in the engineering menu (##36446337## → Bluetooth → BLE).

3. Connection via OTG cable: when Bluetooth does not work

If your smartphone does not support Bluetooth 4.0+ or the gamepad refuses to connect over the air, you can use OTG adapter. This method guarantees minimal delays and a stable connection, but requires:

  • 🔌 OTG cable with connector Micro-USB/USB-C (depending on the smartphone port).
  • 🔋 Gamepad with support for wired connection (most models Ritmix have this mode).
  • ⚡ Enabled option OTG in the phone settings (on some devices it needs to be activated manually).

Instructions by connection:

  1. Connect the OTG cable to the smartphone, and the other end to the gamepad (use the port Micro-USB on the joystick).
  2. Wait until the smartphone detects the device (a notification may appear "Connected USB device").
  3. If the gamepad does not work automatically, install the application USB/BT Joystick Center for manual configuration.

Advantages of a wired connection:

  • ⚡ Zero delays —ideal for shooters and fighting games.
  • 🔋 Does not drain the gamepad battery (power comes from the smartphone).
  • 🛡️ Works even on devices without Bluetooth.

Disadvantages:

  • 📱 Takes up the charging port - you cannot play and charge the phone at the same time.
  • 🎮 The cable may interfere during the game (solved by using extension cord).

Via Bluetooth|Via OTG cable|I use a special adapter|I don’t connect, I play on the sensor-->

4. Setting up buttons and compatibility with games

Even after successfully connecting the gamepad Ritmix the buttons may not work correctly: for example, LB/RB they do not respond, or the analog sticks are detected as a cross. This is due to the fact that many mobile games are optimized for controllers Xbox or DualShockand Ritmix uses their own protocols.

Configuration solutions:

Problem Cause Solution
Buttons do not work as in the game Layout mismatch Use Octopus or Mantis Gamepad Pro for remap
Analog sticks are not recognized The game does not support D-Input Switch the gamepad to mode X-Input (if there is a switch)
Vibration does not work No support in the game Enable vibration in the gamepad settings (if there is an option)
The gamepad turns off during the game Energy saving Bluetooth Add gamepad to battery optimization exceptions

For manual binding of buttons, we recommend the application Octopus:

  1. Download Octopus from Google Play and provide all the necessary permissions.
  2. Connect the gamepad and open the application.
  3. Select the game in which you want to configure controls.
  4. Follow the instructions on the screen, pressing the gamepad buttons to bind to virtual keys.
💡

If the game does not support a gamepad, but has keyboard controls (for example, in emulators), use Octopus for emulation taps on the screen. Create a profile where the gamepad buttons will press virtual keys on the screen.

To check the functionality of the gamepad, install the application Gamepad Tester (available in Google Play). It will show:

  • 🎮 Are all buttons and sticks responsive?
  • 🔄 Are the axes of analog sticks determined correctly?
  • 🔊 Does vibration work (if supported by the model).

5. Solving common problems

If the gamepad Ritmix does not connect or is unstable, use these troubleshooting instructions:

Problem 1: The smartphone does not see the gamepad in the list of Bluetooth devices.

  • 🔄 Reboot both devices.
  • 📱 Remove all previously saved devices Ritmix from the Bluetooth list.
  • 🛠️ Update your smartphone firmware (older versions of Android may not have drivers).
  • 🔧 Try it connect through another device (PC or tablet) to check the functionality of the gamepad.

Problem 2: The gamepad connects, but immediately disconnects.

  • ⚡ Disable the power saving mode for Bluetooth in the battery settings.
  • 🔌 Connect the gamepad via OTG and check that Does it work stably in wired mode?
  • 📶 Move closer to the router - sometimes Wi-Fi interference interferes with the Bluetooth connection.

Problem 3: Buttons press by themselves (ghost clicks).

  • 🧹 Clean the button contacts on the gamepad with alcohol (perhaps dirt got in).
  • 🔄 Switch the gamepad to another mode (D-Input/X-Input).
  • 🛠️ Update the gamepad firmware (if available on the website Ritmix).
How to update the Ritmix gamepad firmware?

To update firmware, download the official software Ritmix Gamepad Updater from the manufacturer's website. Connect the gamepad to the PC via USB, run the app and follow the instructions. Attention: do not disconnect the gamepad during the process - this may damage it.

⚠️ Attention: On some smartphones with custom firmware (for example LineageOS or MIUI with modifications) may lack standard drivers for gamepads. In this case, installing a kernel with support for HIDdevices or using a Magiskmodule will help. data-i="210">Attention: Gamepad Enabler.

6. Alternative connection methods

If standard methods do not work, try workarounds:

Method 1: Connecting via adapter 8BitDo.

Adapter 8BitDo Wireless Bluetooth Adapter 2 allows you to connect gamepads Ritmix to smartphones, even if they are not directly supported. Instructions:

  1. Connect the adapter to your smartphone via USB-C or Micro-USB.
  2. Switch the adapter to mode Android (double press the button on the adapter).
  3. Connect the gamepad to the adapter via Bluetooth (as with a regular device).

Method 2: Use Steam Link.

If you play via Steam Link, the gamepad Ritmix can be connected to a PC, and then broadcast control to a smartphone:

  1. Connect the gamepad to the PC via Bluetooth or USB.
  2. Run Steam and activate the mode Big Picture.
  3. In the controller settings, select "Common controller".
  4. Connect your smartphone to the PC via Steam Link and play with the gamepad.

Method 3: ADB commands to force the connection.

If the gamepad is detected by the system, but does not connect, try manually linking it via ADB:

adb shell am start -a android.settings.BLUETOOTH_SETTINGS

adb shell input keyevent 19 # Press up (select device)


adb shell input keyevent 23 # Confirm connection

This method works on devices with Android 9–12, but requires USB debugging to be enabled.

7. Optimization for games: how to reduce lag

Even after a successful connection, dynamic games (for example, PUBG Mobile or Call of Duty: Mobile) may experience input lags. To minimize lags:

  • 📶 Turn off Wi-Fiif you play via the mobile data, sometimes interference from the router affects Bluetooth.
  • 🔋 Close background applications, especially instant messengers and social networks that consume resources.
  • 🎮 Use a wired connection (OTG) for latency-critical games.
  • 🛠️ Activate performance mode in the battery settings for the game.
  • 🔄 Reduce the polling rate of the gamepad (if there is such an option in the settings applications for control).

To test input lag, use the application Input Lag Tester. The optimal value for a comfortable game is up to 50 ms. If the lag exceeds 100 ms, try:

  • Reconnect the gamepad in a different mode (X-Input/D-Input).
  • Disable vibration (it can create additional load).
  • Use a gamepad with support Bluetooth 5.0 (for example, RGP-500).
💡

For maximum stability, give preference to a wired connection via OTG. Bluetooth will always have delays, albeit minimal ones (10–30 ms).

Not all mobile games work correctly with gamepads. Below is a table of compatibility with popular projects: Ritmix. Below is a table of compatibility with popular projects:

Game Gamepad support Nuances Problem solving
PUBG Mobile ✅ Yes Requires manual button binding Use Octopus or built-in control settings
Call of Duty: Mobile ✅ Yes Analogue sticks can be detected as a cross pad Switch gamepad to mode X-Input
Genshin Impact ✅ Yes Only the official controller is supported Use Mantis Gamepad Pro for emulation DualShock
Minecraft ✅ Yes No problem —
Fortnite ❌ No (officially) Blocks uncertified gamepads Use Octopus to emulate touch controls

For emulators (PPSSPP, Dolphin, RetroArch) gamepads Ritmix usually detected automatically. If the buttons do not work correctly:

  1. Open the emulator settings.
  2. Go to the section Controller or Input.
  3. Select a profile for XInput or DirectInput (depending on the gamepad mode).
  4. Bind buttons manually.

FAQ: Frequently asked questions

My Ritmix RGP-200 does not connect to the phone. What to do?

First, check if the indicator on the gamepad lights up when you hold it Home + Start. If not, charge the device. If the indicator is blinking, but the phone does not see the gamepad:

  1. Delete all saved Bluetooth devices with the name Ritmix.
  2. Restart the phone and gamepad.
  3. Try connecting through another device (tablet or PC) to check the functionality of the gamepad.

If the problem persists, update the smartphone firmware or use an OTG cable.

In the game, the buttons do not work as they should. How to reassign?

Install the application Octopus or Mantis Gamepad Pro:

  1. Connect the gamepad.
  2. Select the game in the application list.
  3. Follow the instructions on the screen to link buttons.
  4. Save the profile and start the game.

For emulators (for example, PPSSPP), the control settings are available in the menu Settings → Controls.

The gamepad constantly turns off during the game. How to fix it?

This is a typical problem due to Android power saving. Solutions:

  • Add the gamepad to battery optimization exceptions (Settings → Battery → Battery optimization → All applications → Ritmix).
  • Disable adaptive battery (Settings → Battery → Adaptive battery).
  • Use a wired connection via OTG.
Can Ritmix be connected to an iPhone?

Officially gamepads Ritmix are not supported iOSas Apple blocks uncertified controllers. However, there are workarounds:

  • Use an adapter 8BitDo Wireless Bluetooth Adapter 2 in Switch.
  • Connect the gamepad to the PC, and then cast the screen to the iPhone via Steam Link or Moonlight.

Please note that in this case there may be input delays.

How to reset the Ritmix gamepad to factory settings?

On most models Ritmix the reset is done like this:

  1. Turn off gamepad.
  2. Find a small hole on the back panel with the inscription Reset.
  3. Insert a paperclip into it and hold for 10-15 seconds until the indicator flashes.
  4. Release the button and turn on the gamepad again.

After resetting all bindings buttons will be removed and the gamepad will return to standard settings.