The mobile version Genshin Impact is known for its demands on hardware resources, which often leads to drops in frame rate and overheating of the device. Many players are faced with a situation where, at maximum settings, the game turns into a slideshow, especially in locations with a lot of effects. However, there are proven methods that allow you to stabilize performance even on average smartphones without losing visual quality.
Optimizing the rendering process requires an integrated approach: from changing in-game parameters to tuning the system itself. Android. It is important to understand that there is no one magic button that will instantly solve all problems. You'll have to experiment with a combination of graphics settings, CPU power management, and background processes. In this article we will look at the most effective ways to increase FPS and reduce input lag.
Basic graphics settings within the game
The first and most obvious step is to adjust the parameters directly in the game menu. The developers have provided a flexible settings system that allows you to balance between picture quality and smooth gameplay. Go to the Settings → Graphics section and carefully study the available options. The main lever of influence on performance is the choice of preset mode.
If your smartphone is not one of the flagship models of the current year, it is recommended to switch the graphics mode to Low or Medium. This action radically reduces the load on GPU, freeing up resources for processing physics and game scripts. Please note that even at low settings, character textures and the main effects of spells remain detailed enough for a comfortable game.
The frame rate parameter deserves special attention. By default, the game can be limited to 30 FPS. Be sure to change this setting to 60if your device supports this screen refresh rate. This will make the controls responsive and the camera movements smooth. However, remember that enabling 60 frames doubles the load on the processor compared to the basic mode.
⚠️ Attention: Enabling the 60 FPS mode on older or budget devices can lead to critical overheating of the case and throttling (automatic reduction in processor frequency), which will ultimately have the opposite effect in the form of lags.
For For advanced users, a Custommode is available, which allows you to fine-tune individual aspects of rendering. You can turn off shadows, reduce the draw distance LOD or reduce the quality of post-processing. Experiment with these sliders, turning off one parameter at a time and checking the result in a combat situation.
If, after lowering the settings, the game still slows down, try temporarily disabling the display of the names of other players in multiplayer mode - this often helps in overloaded locations.
Optimizing the Android system for games
The operating system itself can consume a significant portion of resources if it is not cleaned first. Before starting Genshin Impact close all background applications through the multitasking menu. Browsers, social networks and instant messengers can take up RAM, which is necessary for the game to cache textures.
In the developer settings, which can be activated through the menu About the phone (clicking 7 times on the build number), important optimization tools are hidden. Find the section responsible for animations and set the values for the Window Animation, Transition Animation, and Animator Duration scales. This will not directly increase the FPS in the game, but will make the system interface more responsive and free up processor cycles. Disabled or 0.5x for the "Window Animation", "Transition Animation" and "Animator Duration" scales. This will not directly increase the FPS of the game, but it will make the system interface more responsive and free up CPU cycles.
- 🚀 Activate the mode Performance or Game Turbo in the proprietary shell of your smartphone (MIUI, OneUI, ColorOS, etc.).
- 🧹 Clear the system and application cache before the session using the built-in cleaning utilities.
- 📵 Turn on Do Not Disturb mode so that incoming notifications do not interrupt rendering frame.
It is also worth checking the display settings. If your screen supports a high refresh rate (90 Hz or 120 Hz), make sure that the mode is selected in system settings High or Adaptive. Sometimes the system defaults to 60 Hz to save power, which limits the game's potential.
Temperature and throttling control
Heat dissipation is the main enemy stable FPS on mobile devices. When the processor temperature SoC reaches a critical level, the protection system forcibly reduces the clock frequency of the cores. This process is called throttling, and it manifests itself in sharp drops in frame rate after 15-20 minutes of play.
To combat overheating, it is necessary to ensure effective heat removal. Remove the protective case during gaming sessions, especially if it is made of silicone or thick rubber, which act as a heat insulator. Play indoors with good ventilation or under air conditioning.
| Cooling method | Efficiency | Risks |
|---|---|---|
| Removing the cover | Low | Absent |
| Fan/Air Conditioner | Average | Noise, draft |
| Smartphone cooler | High | Condensation during sudden cooling |
| Freezer compartment | Extremely high | Moisture damage to electronics |
There are special accessories - coolers for smartphones that run on Peltier elements. They are able to actively cool the back cover of the device, preventing throttling. This is the only hardware solution that really allows you to maintain stable 60 frames over long sessions without reducing graphics settings.
⚠️ Attention: Never put a working smartphone in the freezer for cooling! A sharp temperature change will cause condensation to form inside the case, which is guaranteed to lead to a short circuit and failure of the device.
☑️ Preparing for a long session
Use of third-party tools and tweaks
Advanced users often resort to using third-party software to boost capabilities devices. Applications like Game Booster Plus or built-in game launchers from manufacturers allow you to forcibly maintain high processor frequencies, ignoring standard power saving algorithms.
However, the most radical method is to change the rendering resolution through system commands or special utilities that require root access. Reducing the screen resolution below the display's native value significantly increases FPS, since the video core needs to process fewer pixels. The picture will become less clear, but the smoothness will increase significantly.
For devices with an unlocked bootloader, custom system kernels are available that contain optimized drivers. GPU. Installing such a kernel can unlock the potential of the chipset, but requires deep knowledge of Android firmware. An error in this process can lead to a “bricked” phone.
Risks of using root access
Obtaining superuser rights will void the warranty on the device. In addition, some anti-cheat game systems can block the application from running on rooted devices, although Genshin Impact is still loyal to modified systems if cheats are not used.
The influence of the game version and updates
Developers HoYoverse regularly release patches that not only add new content, but also optimize the game code. It often happens that after a major update, performance on certain phone models drops due to errors in the new code, and then is fixed by a hotfix.
Always make sure the client version is up to date. Older versions may not work correctly with new video accelerator drivers. At the same time, beta versions of the game often contain unoptimized and unstable code, so for a comfortable game it is recommended to use only the stable release from the official store. FPS, therefore, for a comfortable game it is recommended to use only the stable release from the official store.
The size of the game is constantly growing, which increases the load on the memory drive. If the internal memory of the smartphone is more than 90% full, the data reading speed drops, which causes micro-freezes when loading locations. Regularly free up space by deleting unnecessary files.
⚠️ Attention: The settings interface and optimization options may change with the release of new versions of the game. If you do not find the parameters described, check the official patch notes on the developer's website.
Regularly updating the game and clearing free space on your drive are simple but critical steps to prevent micro-delays when loading textures.
Optimization FAQ
Why does Genshin Impact heat up the phone so much?
The game uses complex shaders and real-time physics, which loads the processor and video card by 100%. Heat generation is a side effect of this work. Lowering graphics settings and using external cooling helps reduce heat.
Is it safe to use applications to overclock FPS?
Most legal boosters simply change the priorities of processes in the system and are safe. However, applications that require Root and modify system kernel files carry the risk of unstable system operation or device failure if configured incorrectly.
Does charging during the game affect FPS?
Yes, charging causes additional heating of the battery and motherboard. The total temperature of the device increases faster, which provokes early throttling. For maximum FPS, it is better to play on battery power or use pass-through charging through an external cooler.
Is it possible to get a ban for using optimizers?
Using Android system settings and legal game boosters is not punishable. A ban is possible only when using third-party software that interferes with the game code, changes resource files, or provides advantages in gameplay (cheats).