Huawei P50 Pro — a flagship with powerful hardware, but without services Google due to American sanctions. This means that Android Auto —an application that depends on Google Play Services —is not officially available for installation via AppGallery. However, there are workarounds that allow you to run the service on this smartphone. Unlike devices with a full-fledged Google Mobile Services (GMS), here you will need to manually install an APK, configure alternative services, or even modify system files.

Many owners P50 Pro face errors like "Android Auto is not supported on this device" or "There is no connection to Google Play Services". The reasons lie in the absence of key components GMS Corewhich Huawei replaced with its own Huawei Mobile Services (HMS). But there is a solution: from installing modified versions Android Auto to using Googlefier for partial integration of services Google. It is important to understand that some methods require unlocking the bootloader or obtaining root-rights, which will void the warranty and may lead to system instability.

In this article we will look at three proven methods installations Android Auto on Huawei P50 Pro (relevant for EMUI 12/13), their pros and cons, as well as typical errors and ways to eliminate them. If you are ready to experiment, let's get started.

Why Android Auto does not work on Huawei P50 Pro out of the box

The main problem lies in the absence Google Play Services of a framework, without which Android Auto simply will not start. Huawei P50 Pro comes with Huawei Mobile Services (HMS)that are incompatible with the ecosystem Google. Even if you download the APK file Android Auto manually, the application will either not install or will throw an error upon launch.

The second reason is limitations EMUI. The firmware Huawei blocks the installation of applications that require GMSat the system level. This applies not only to Android Auto, but also to other services, such as Google Maps or YouTube Music. However, there are loopholes:

  • 🔧 Using modified versions Android Auto (for example, AA Gen2 or AA Phenotype Patcher), which bypass the check GMS.
  • 🔄 Partial installation Google Play Services via tools like Googlefier or LZPlay.
  • 📱 Manual implementation GMS via ADB (requires an unlocked bootloader).

Important: starting with EMUI 13, Huawei has tightened control over the installation of third-party GMS modules, so some methods may no longer work after updates.. Before you begin, check the firmware version in Settings → About phone → EMUI version.

⚠️ Attention: Installation Google Play Services on devices Huawei without official support GMS can lead to unstable system operation, errors in other applications or even a "brick" (inoperability) of the device. It is recommended to create a backup copy of your data before experiments.

Method 1: Installing a modified Android Auto APK (without root)

The simplest and safest method is to use specially modified versions Android Autothat do not require availability Google Play Services. These assemblies bypass the compatibility check and work on HMSdevices, including Huawei P50 Pro.

The most popular options:

  • 📌 AA Gen2 - a modified version with support HMS and bypassing restrictions EMUI.
  • 📌 AA Phenotype Patcher - a patcher that replaces system checks and allows you to run original Android Auto.
  • 📌 CoolAuto —an alternative launcher for Android Auto with advanced settings.

Step-by-step guide:

  1. Download an APK file of one of the modified versions (for example, AA Gen2) from a trusted source (we recommend Telegram channels like @HuaweiGMS or @AndroidAutoMods).
  2. Before installation, enable permission to install from unknown sources: go to Settings → Security → Advanced → Installation from unknown sources and select the browser or file manager through which you will install the APK.
  3. Install the downloaded APK. If an error appears "The application is not installed", try a different version or check if it is blocking the installation Huawei AppGallery (temporary solution) — disable the Internet during installation).
  4. After installation, run Android Auto. If the application requests an update - cancel it, otherwise the original version from Play Market will replace the modified one and stop working.

Download APK from a trusted source|Enable installation from unknown sources|Disable the Internet during installation|Skip the request for update after launch-->

If after installation Android Auto does not connect to the car:

  • 🔌 Check the cable USB-C —it must support data transfer (not all charging cables are suitable).
  • 🔄 Reboot the phone and car head unit.
  • 📱 In the developer settings (Settings → About phone → Build number (tap 7 times) → Developer settings) enable USB debugging i Allow location spoofing.
⚠️ Attention: Modified versions Android Auto may contain vulnerabilities or collect data. Download APK only from trusted sources and check the hash files (for example, via VirusTotal).

Method 2: Installing Google Play Services via Googlefier (without root)

If modified versions Android Auto are unstable, you can try partially integrate Google Play Services using the tool Googlefier. This method does not require unlocking the bootloader, but is only suitable for devices on EMUI 12 (on EMUI 13 it may not work).

Googlefier is a script that installs the minimum required a set of GMScomponents for the operation of key services Google, including Android Auto, Google Maps and YouTube. It does not replace HMS completely, but only adds the missing modules.

Instructions:

  1. Download the latest version Googlefier from the official repository on GitHub (search by request Googlefier Huawei).
  2. Unzip the archive to your computer. The folder should contain files googlefier.bat (for Windows) or googlefier.sh (for Linux/Mac).
  3. Connect Huawei P50 Pro to the computer via USB and enable Debugging via USB (see previous section).
  4. Run the script googlefier.bat as administrator. Follow the instructions on the screen - the script will automatically detect the device model and install the necessary components.
  5. After completion, restart the phone. Google Play Services and Google Play Store (possibly under other names).
  6. Now you can install the original Android Auto from Play Market or manually via APK.
Component Purpose Status after Googlefier
Google Play Services Main framework for work Android Auto ✅ Installed (version may be outdated)
Google Play Store Application store for installation Android Auto ✅ Installed (may require authorization)
Google Account Manager Account management Google ✅ Installed (synchronization errors are possible)
Google Services Framework Data synchronization between services ⚠️ Installed, but may be unstable

If after installation Android Auto gives an error "No Internet connection", follow these steps:

  • 🔄 Restart your phone and check your network connection.
  • 📱 In the application settings Google Play Services (Settings → Applications → Google Play Services), clear the cache and data.
  • 🔧 Install a manual patch for Android Auto (for example, AA Phenotype Patcher) over the original APK.
💡

If Google Play Services constantly stops, try disabling automatic updates of services in the Play Market settings. This will prevent replacement of working components with incompatible versions.

⚠️ Attention: The EMUI 13 Googlefier may not work correctly due to changes in system partitions. If the script gives an error Failed to mount system, try using the alternative method with LZPlay (see next section) or roll back to EMUI 12.

Method 3: Full installation of GMS via LZPlay (requires unlocking bootloader)

The most reliable, but also the most risky method is complete installation Google Mobile Services (GMS) through a tool LZPlay. This method requires unlocking the bootloader (bootloader unlock), which is not officially supported Huawei for models after 2020. However, enthusiasts have found workarounds.

LZPlay is a modified module that integrates GMS at the system level, allowing you to install and update any applications Googleincluding Android Auto. The advantage of this method is that after installation Android Auto it will work as stably as on smartphones with official support GMS.

Step-by-step guide:

  1. Unlock the bootloader:
    • Get the unlock code on the official website Huawei (for older models) or through unofficial services (for P50 Pro you will need to use vulnerabilities, for example, DC-Unlocker).
    • Connect the phone to the computer in Fastboot (turn off the phone, then press Volume down + Power).
    • Run the command: 
      fastboot oem unlock [Your_unlock_code]
  2. Install LZPlay:
    • Download the latest version LZPlay from XDA Developers or Telegram (search by hashtag #LZPlay_Huawei).
    • Unpack the archive and run script install.bat (for Windows) or install.sh (for Linux/Mac).
    • Follow the instructions on the screen. The script will automatically detect the model and install the necessary components.
  • Set up GMS:
    • After rebooting into menu will appear Google Play StoreLog in to your account Google.
    • Install Android Auto from Play Market.
    • Launch the application and perform the initial setup.

    Advantages of the method:

    • 🔥 Full compatibility with Android Auto and other services Google.
    • 🔄 Ability to update applications via Play Market.
    • 📱 Stable operation without failures (if installed correctly).

    Disadvantages:

    • ⚠️ Risk of device bricking if the bootloader is not unlocked correctly.
    • 🔧 Cancellation of warranty.
    • 📵 Possible problems with Huawei AppGallery and branded services.
    What what to do if after installing LZPlay Android Auto does not see the car?

    If Android Auto does not connect to the head unit after installation LZPlay, check the following points:

    1. Make sure that the developer mode is enabled USB debugging And Allow location simulation.

    2. Try another USB cable (preferably original from Huawei or certified USB-C).

    3. In settings Android Auto (Settings → Applications → Android Auto → Advanced) reset the application settings.

    4. If the problem persists, install the patch AA Phenotype Patcher over the original Android Auto.

    ⚠️ Attention: Unlocking the bootloader on Huawei P50 Pro may lead to data loss, unstable camera operation or denial of service at official service centers. Before the procedure, be sure to create a backup via Huawei Backup or third-party tools like Titanium Backup (requires root).

    Typical errors and their solutions

    Even after successful installation Android Auto on Huawei P50 Pro users often encounter errors. Let's look at the most common problems and how to fix them.

    Error Cause Solution
    Android Auto is not supported on this device Missing Google Play Services or an incompatible version is installed. Install a modified APK (AA Gen2) or integrate GMS via Googlefier/LZPlay.
    No connection to Google Play Services Google Play Services installed, but does not work due to restrictions EMUI. Clear the cache and data Google Play Services in the application settings. If that doesn't help, reinstall GMS.
    Android Auto keeps restarting Conflict with other applications or unstable version GMS. Disable battery optimization for Android Auto (Settings → Battery → Launch applications). Install the patch AA Phenotype Patcher.
    The device is not recognized by the head unit of the machine Problems with USBconnection or developer settings. Try a different cable. Turn on USB debugging and Allow location simulation.
    Android Auto crashes when starting navigation Conflict with Google Maps or Huawei Petal Maps. Install an alternative navigator (for example, Waze or Yandex Navigator) and select it in the settings Android Auto.

    If none of the methods helped, check:

    • 📋 EMUI version — on EMUI 13 some methods may not work. Try to roll back to EMUI 12 via Huawei HiSuite.
    • 🔌 USB connection mode - in the notification shade when connecting to the machine, select File transfer (MTP).
    • 🔄 Conflicting applications — temporarily remove other launchers for the car (for example, Huawei HiCar).

    Modified APK (AA Gen2)|Googlefier|LZPlay (with bootloader unlocked)|Nothing helps|Another method-->

    Alternatives to Android Auto for Huawei P50 Pro

    If none of the methods worked or you do not want to risk system stability, consider alternative solutions for connecting your smartphone to the car multimedia system.

    The most popular alternatives:

    • 🚗 Huawei HiCar - proprietary solution from Huawei, which partially replaces Android Auto. Supports navigation, music and calls, but has limited functionality compared to its Googleanalog.
    • 🎵 CarLauncher —a third-party launcher with an interface adapted for the car. Works without GMS, but requires manual configuration.
    • 🗺️ AutoMate - another alternative launcher with support for voice control and widgets. Suitable for devices without Google Play Services.
    • 🔊 MirroLink - wireless screen mirroring technology. Does not work on all machines, but allows you to use any applications from your phone.

    Comparison of alternatives:

    Application Requires GMS Navigation support Voice control Cost
    Huawei HiCar ❌ No ✅ Yes (Petal Maps) ✅ Yes Free
    CarLauncher ❌ No ⚠️ Via third-party applications ❌ No Paid version (~500 ₽)
    AutoMate ❌ No ✅ Yes (integration with Google Maps via browser) ✅ Yes Free (premium features for 300 ₽)
    MirrorLink ❌ No ✅ Any application ⚠️ Depends on machines Free (requires machine support)

    If you need a full replacement Android Auto, the best option is AutoMate. It supports widgets, voice commands, and even browser integration. Suitable for minimalists Google Assistant via browser. Suitable for minimalists Huawei HiCar, but be prepared for a limited set of functions.

    💡

    If your machine supports MirrorLink, this is the most universal connection method - it allows you to use any navigator or music application from the phone screen, without being tied to Google or Huawei.

    How to return everything back: rollback changes

    If, after experimenting with Android Auto the phone becomes unstable, you can return it to its original state. Rollback methods depend on which installation method you used.

    If you installed a modified APK:

    • Simply uninstall the application through Settings → Applications → Android Auto → Uninstall.
    • Clean cache and data Google Play Services (if they were installed).

    If you used Googlefier:

    • Download the script Googlefier Remove from the same source where you got the main package.
    • Connect your phone to the computer and run the removal script: 
      googlefier_remove.bat
    • Reboot the device.

    If you installed LZPlay with unlocking the bootloader:

    • Restore the stock firmware via Huawei eRecovery:
      1. Turn off the phone.
      2. Hold Volume up + Powerto enter the mode eRecovery.
      3. Select Download latest version and recovery.
      4. Wait for the process to complete (the data will be erased!).
    • If eRecovery does not work, use Fastbootstock firmware ROM via Huawei Multi-Tool.
      • ⚠️ Attention: After restoring the stock firmware, all data on the phone will be deleted. If you haven't made a backup, you won't be able to restore your photos, contacts, or messages. Use Huawei Backup or third-party tools (for example, Swift Backup for rootdevices) before rolling back.

      FAQ: Frequently asked questions about Android Auto on Huawei P50 Pro

      Is it possible to install Android Auto on Huawei P50 Pro without a computer?

      Yes, but with limitations. You can install a modified APK (for example AA Gen2) directly on your phone by downloading it through the browser. However, for methods with Googlefier or LZPlay a computer is required, since it requires a connection via ADB or Fastboot.

      Will Android Auto work wirelessly (via Wi-Fi/Bluetooth) on P50 Pro?

      Wireless mode Android Auto is not officially supported on devices without GMS. However, some users report that after installing LZPlay and the original Android Auto wireless connection worked. To do this you need:

      1. Connect to the machine via cable and complete the initial setup.
      2. In the settings Android Auto enable the option Wireless connection.
      3. Reboot the phone and machine, then try to connect without cable.

      Please note that the stability of the wireless mode is not guaranteed.

      Why does Android Auto not see my car after installation?

      The problem may be related to:

      • Cable —use the original USB-C cable with transmission support data.
      • USB settings —in the notification shade when connected, select File transfer (MTP).
      • Conflict with HiCar —temporarily delete or disable Huawei HiCar in application settings.
      • EMUI version - on EMUI 13 additional patches may be required.

      Also check if it supports your car Android Auto (some budget models only work with MirrorLink or Apple CarPlay).

      Is it possible to update Android Auto after installation via APK?

      No, update modified versions Android Auto via Play Market It is impossible - this will lead to replacing the working APK with an official version that does not support HMS. To update the application:

      1. Download a new version of the modified APK.
      2. Delete the old version Android Auto.
      3. Install a new APK (remember to turn off the Internet during installation to avoid automatic updates).
      Will Google Assistant work in Android Auto on P50 Pro?