Players PUBG Mobile on Android they often encounter the problem of inaccurate aiming when using touch controls. A gyroscope, a smartphone's built-in sensor that allows you to control the camera by tilting the device, can dramatically improve your gaming experience. However, many users do not know how to properly activateset it up or even check its functionality.

In this article we will look into all stages: from diagnosing hardware sensors to fine-tuning the gyroscope sensitivity PUBG Mobile taking into account the characteristics of different versions of Android and smartphone models. You will learn how to avoid common mistakes, why the gyroscope may not work on some devices, and how to optimize it for maximum accuracy in combat.

Checking availability and gyroscope performance on Android

Before setting up the gyroscope in the game, make sure that your smartphone physically equipped has this sensor. Not all budget models Android have a gyroscope - it is often replaced with an accelerometer, which is not suitable for precise control in shooters.

To check the presence of a sensor:

  • 📱 Install the application Sensor Test (available in Google Play) or CPU-Z.
  • 🔍 In CPU-Z go to the tab Sensors — if there is a gyroscope, it will be displayed as Gyroscope.
  • 📊 In Sensor Test tilt the device: if the arrow Gyroscope reacts to movements, the sensor is working.

If there is no gyroscope, alternative methods (for example, emulation through accelerometer) will be significantly worse results v PUBG Mobile. In this case, consider using gamepad or specialized triggers.

📊 Is your smartphone equipped with a gyroscope?
Yes, and it works correct
Yes, but with lags
No gyroscope
I don’t know how to check
⚠️ Attention: On some devices Xiaomi and Realme the gyroscope can be disabled at the firmware level. Check the developer settings (Settings → About phone → Build number (7 taps) → Developer settings → Disable MIUI optimization).

Activating the gyroscope in Android settings

Even if the gyroscope is physically present, it can be software locked system. To unlock:

  1. Go to Settings → Applications → Special access → Sensors body (the path may vary depending on the version Android).
  2. Find PUBG Mobile in the list and allow access to sensors.
  3. Enable the option Allow changing sensor settings (if available).

On Samsung s One UI the path is different:

Settings → Biometrics and security → Other security settings → Sensors

If there are no options, your firmware does not support manual control of sensors. In this case, the gyroscope will only work through the settings of the game itself.

💡

After changing the sensor settings, restart your smartphone. This will help avoid conflicts with background processes that may block access PUBG Mobile to the gyroscope.

Setting up the gyroscope in PUBG Mobile: step-by-step guide

Now let's move on to the game itself. The gyroscope is PUBG Mobile configured in two places: main settings and sensitivity.

1. Enabling the gyroscope in the control settings

  • 🎮 Launch PUBG Mobile and go to Settings → General → Control settings.
  • 🔄 Activate the slider Gyroscope (usually located in the section Camera).
  • 🎯 Select the operating mode:
    • Always on — the gyroscope works constantly.
    • Only when aiming —activated when you hold down the aim button.

2. Setting sensitivity

This is the most important step. data-i="110">or, conversely, too slow response. The optimal parameters depend on the smartphone model: camera jerks or, conversely, too slow a reaction. The optimal parameters depend on the smartphone model:

Device type Sensitivity (without scope) Sensitivity (with scope) Sensitivity (ADS)
Flagships (Samsung S22, OnePlus 10 Pro) 280–320% 220–260% 180–200%
Mid segment (Redmi Note 11, Galaxy A53) 300–340% 240–280% 200–220%
Budget (Poco M4, Realme C35) 340–380% 280–320% 240–260%

Start with the minimum values ​​and gradually increase, testing the response in Training mode. Please note delay: if the camera “catches up” with your movements, the sensitivity is too low.

Gyroscope is enabled in the game settings|Sensitivity corresponds to the type of device|Testing was carried out in training mode|No conflicts with other control settings (for example, auto-aim)-->

Optimizing the gyroscope for different play styles

The gyroscope settings should adapt to your game style. Let's look at three common scenarios:

1. Sniper style (long range)

For accurate shooting from AWM or Kar98k:

  • 🎯 Set ADS sensitivity to 160–180%.
  • 🔄 Use the mode Only when aiming.
  • 🛠️ Disable Automatic sensitivity adjustment in the camera settings.

2. Aggressive close combat (SMG/Shotgun)

For quick turns with UMP45 or S12K:

  • 🔥 Increase Sensitivity without sight to 360–400%.
  • 🎮 Enable Gyroscope always.
  • ⚡ Activate Gyroscope acceleration (if available in the settings).

3. Universal style (Assault Rifles)

For M416 or AKM:

  • ⚖️ Set Sensitivity without sight to 300–330%.
  • 🔍 Sensitivity with scope — 240–270%.
  • 🔄 Use Gyroscope + Finger (hybrid control).
How to check the ping before setting up the gyroscope?

High ping (>100 ms) can create the illusion of a gyroscope "lag". Before testing sensitivity, check the delay in the main menu PUBG Mobile (signal icon in the upper right corner). If the ping is unstable, connect to the network via cable (with support USB Ethernet) or use Cloud Gaming (for example, NVIDIA GeForce NOW), where delays are minimal.

Common problems and their solutions

Even after correct settings, the gyroscope may not work correctly. Let's look at typical symptoms and ways to eliminate them:

Problem Possible cause Solution
The gyroscope does not reacts to movements No access to sensors Check permissions for PUBG Mobile in settings Android
Camera twitches or shakes Sensitivity is too high Reduce the values by 20-30% and calibrate the sensors
The gyroscope only works in one direction Sensor hardware failure Test in another application (for example, Google Cardboard)
Latency reactions (>200 ms) Background processes or weak processor Close all applications, activate performance mode

If the problem persists, try reset settings gyroscope to standard:

PUBG Mobile Settings → Controls → Reset settings → Gyroscope only
⚠️ Attention: On devices with MediaTek Helio G (for example, Redmi Note 9), there may be a conflict between the gyroscope and the function Game Turbo. Disable it in the game settings before calibration.

Additional tools for improving the gyroscope

If standard settings do not give the desired result, consider third-party utilities and accessories:

1. Calibration applications

  • 📲 Gyro Tools —allows you to more accurately adjust sensitivity for specific games.
  • 🎯 GFX Tool for PUBG —optimizes performance and reduces gyroscope lag.

2. Physical accessories

  • 🎮 Triggers (for example, Black Shark Physical Buttons) - reduce the load on the gyroscope when shooting.
  • 🖥️ Mounts for smartphone - stabilize the device and reduce hand tremors.

3. Firmware and modifications

On rooted devices you can use:

  • 🛠️ Magisk Module "Gyroscope Fix" - fixes lag on some chipsets.
  • 🔧 Xposed Framework with module Gyro Sensitivity Modifier.

Remember: using modified firmware or cheats can lead to account ban c PUBG Mobile. Use them at your own peril and risk.

💡

The gyroscope shows the best results on smartphones with a sensor polling rate of ≥200 Hz (for example, ASUS ROG Phone or Black Shark). On budget devices (50–100 Hz polling), the efficiency will be lower due to delays.

Comparison of the gyroscope with other control methods

The gyroscope is not the only way to control the camera in PUBG Mobile. Let's compare it with the alternatives:

Method Advantages Disadvantages Better for
Gyroscope Natural control, high accuracy at long distances Requires getting used to, may tire the hand Snipers, experienced players
Touch controls (fingers) Simplicity, does not require sensors Low accuracy during quick turns Beginners, casual players
Gamepad Haptic feedback, no hand fatigue Inconvenient for mobile games, high price Professional cybersportsmen
Triggers Improve reaction when shooting Do not replace the gyroscope for control camera Hybrid control (gyroscope + triggers)

The optimal option for most players is combination of gyroscope and touch control. For example: A combination of a gyroscope and touch control screen).

  • 🔄 Gyroscope for precise aiming (ADS).
  • 👆 Sensor for quick turns (swipe across the screen).

FAQ: Frequently asked questions about the gyroscope in PUBG Mobile

Can I use the gyroscope on an Android emulator (BlueStacks, LDPlayer)?

No, emulators do not support gyroscope, since it depends on the physical sensors device. An alternative is to connect an external gamepad with a gyroscope (for example DualSense or Xbox Controller).

Why does the gyroscope only work in horizontal orientation?

This is a limitation PUBG Mobile - the game blocks gyroscope in vertical mode. Solution: play only in landscape orientation or use applications like Ultra Game Booster for forced horizontal mode.

How to calibrate the gyroscope if the camera floats on its own?

The problem arises because sensor drift. For calibration:

  1. Put the phone on a flat surface.
  2. Open Sensor Test and wait until the readings stabilize.
  3. B PUBG Mobile reset the gyroscope settings and restart the game.
Does a case or bumper affect the operation of the gyroscope?

Yes, thick cases (especially with metal inserts) can shield sensors. Try removing the case or use thin silicone options. Also avoid magnetic mounts - they distort the gyroscope readings.

Is it possible to configure the gyroscope separately for each weapon?

In the standard version PUBG Mobile this is not possible. However, in Chinese version (or through GFX Tool) sensitivity profiles are available for different types of weapons. An alternative is to manually adjust sensitivity in battle using the button Quick settings (assigned in Settings → Controls → Button settings).