Xiaomi Redmi 10 is one of the most popular budget smartphones, but even it sometimes lets users down with freezes or incorrect operation. Rebooting the device helps solve 80% of software problems: from interface slowdowns to application errors. However, not everyone knows what exists several types of reboot, and each is suitable for its own situation.

In this article - step-by-step guide for all cases: from a standard reboot to a forced reset via Recovery Mode. We'll also look at when to use each method and what errors can occur. If your Redmi 10 does not respond to presses, overheats or produces critical errors, here you will find a solution.

⚠️ Important: Interface MIUI and button combinations may vary slightly depending on the firmware version. If your Redmi 10 works on MIUI 14 or newer, check that the instructions are up to date in the device settings.

1. Standard reboot (soft reboot)

This is the safest method that does not affect user data. Suitable if your smartphone responds to pressesbut works slowly or applications give errors.

To perform a soft reboot:

  1. Press and hold the button power (located on the right side Redmi 10).
  2. B in the menu that appears, select the item Reboot (or Restart on English firmware).
  3. Confirm the action if the system asks for confirmation.

✅ When to use:

  • 📱 The smartphone slows down or applications often close.
  • 🔄 You need to apply the changes after updating the system.
  • 📶 Problems connecting to Wi-Fi or a mobile network.

❌ It will not help if: The screen does not respond to touches, the device is completely frozen or does not turns on.

💡

If the power button does not work, try connecting the charger - sometimes Redmi 10 the button blocks when the battery level is low (less than 5%).

2. Forced reboot (hard reboot)

If the smartphone does not respond to touches or the screen is black, but the device makes sounds/vibrations, a forced reboot will help. This method does not delete databut interrupts all processes.

Instructions for Xiaomi Redmi 10:

  1. Press the Power and Volume up at the same time.
  2. Hold them 10–15 secondsuntil the screen goes dark and the reboot begins.
  3. Release the buttons when the logo appears MI.

⚠️ Attention: Do not use this method more than once a day. Frequent hard reboots can damage the file. systems.

🔍 How to distinguish freezing from low battery?

  • 🔋 If a battery indicator appears when charging is connected, the problem is a software failure.
  • ⚡ If there is no reaction even to charging, the battery may be low or the connector is faulty.
📊 How often do you do you reboot your smartphone?
Once a week
Only when it freezes
Never
I don’t know

3. Reboot via Recovery Mode (if the phone does not turn on)

If Redmi 10 does not respond to buttons or reboots cyclically (stuck on the logo MI), entering recovery mode will help. This method also allows you to reset the settings to factory settings if other methods did not help.

Step-by-step guide:

  1. Turn off the phone (if it is on, use the forced reboot from the previous section).
  2. Hold Power button and Volume up at the same time.
  3. Hold them until the menu appears Recovery Mode (usually 5-10 seconds).
  4. From the menu, select Reboot → Reboot to System (use the volume buttons to navigate and the power button to confirm).

📌 What to do if the menu is in Chinese?

  • 🇨🇳 The first item is reboot ().
  • 🔄 The second is reset ().

⚠️ Attention: Do not select Wipe Data (clear data) if you do not plan to reset your smartphone to factory settings! This will delete all photos, contacts and applications.

Disconnect Google account (if any)

Save important data on PC

Charge the phone to at least 30%

Make sure the SIM card is removed (optional)-->

4. Reboot via Fastboot Mode (for experienced users)

This method is suitable if Redmi 10 does not even boot into Recovery, but responds to connection to a PC. You will need a computer with installed drivers ADB/Fastboot and a cable USB Type-C.

Instructions:

  1. Turn off the phone.
  2. Press power button and volume down at the same time.
  3. Hold until a screen appears with the inscription Fastboot Mode and the image of a robot.
  4. Connect the phone to PC and enter in the command line: 
    fastboot reboot

🔧 Additional commands Fastboot:

Command Action
fastboot reboot recovery Reboot to Recovery Mode
fastboot reboot bootloader Reboot to Fastboot (current mode)
fastboot devices Checking device connection
fastboot oem edl Switch to mode EDL (for firmware)

⚠️ Attention: Commands fastboot oem unlock or fastboot flash can unlock the bootloader or damage the firmware. Use them only if you understand the consequences!

What to do if the PC does not see the phone in Fastboot?

1. Install drivers Xiaomi USB Drivers from the official website.

2. Try another USB cable (preferably the original one).

3. Switch the USB port on your computer (for example, from USB 3.0 to USB 2.0).

4. Enable USB debugging in the developer settings (if the phone has been turned on at least once).

5. Reboot using ADB (without physical access to the buttons)

If the power or volume buttons do not work, but the phone is turned on and connected to the PC, you can reboot it via ADB (Android Debug Bridge). This method requires you to first set up USB debugging.

Steps:

  1. Connect Redmi 10 to your computer.
  2. Open the command line and enter: 
    adb devices

    (your device).

  3. Run the reboot command: 
    adb reboot

🔹 How to enable USB debugging?

  • 📱 Go to Settings → About phone → MIUI version.
  • 🔘 Click on MIUI Version 7 times until the notification appears You have become a developer!.
  • 🔧 Return to Settings → Advanced → For developers i enable USB debugging.

⚠️ Attention: If USB debugging was not enabled in advance, this method will not work on a locked or frozen phone.

💡

USB debugging is disabled after a hard reset. To use ADB again, you will have to enable it again.

6. What to do if Redmi 10 does not reboot?

If none of the methods helped, the problem may be Hardware. Here are possible causes and solutions:

🔍 Fault diagnosis:

Symptom Possible cause Solution
The phone vibrates, but the screen is black The display cable or matrix is damaged Contact the service center
Does not respond to charging and buttons The battery is low or the power controller is faulty Wait 30 minutes on charging, then try again
Cyclic reboot (bootloop) Damaged firmware or system modules Flash the phone via Fastboot or Mi Flash Tool
Overheats and turns off Battery or processor malfunction Replace the battery or diagnose the board

🛠️ When to contact service?

  • 🔧 The phone has been dropped or gotten wet.
  • 🔥 Overheating is accompanied by a smell burning.
  • 🔋 The battery is swollen (visible from the raised screen).

⚠️ Attention: Self-disassembly Redmi 10 without experience can lead to damage to the cables or loss of warranty. In official service centers Xiaomi diagnosis is usually free.

FAQ: Frequently asked questions about reboot Redmi 10

❓ Why Redmi 10 spontaneously reboots?

Most often this is due to:

  • 🔋 Dead battery (if the charge level is below 15%).
  • 📱 Overheating (games, charging + load).
  • 🛠️ Damaged firmware (after an unsuccessful update).

Solution: check the case temperature, update the software or reset the settings.

❓ Is it possible reboot Redmi 10 during the update?

Interrupting the firmware update process can lead to the phone being "bricked" (completely inoperable). If the update is stuck:

  1. Wait at least 1 hour (sometimes the process takes a lot time).
  2. If the indicator does not change, force restart the phone and repeat the update.
❓ How to restart Redmi 10if the screen does not work?

Use one of the methods:

  • 🔄 Hard reboot (power button + volume up).
  • 🖥️ ADB (if debugging was enabled in advance).
  • 🔌 Connecting to charging (sometimes unlocks the buttons).
❓ How long does it take reboot Redmi 10?

Time depends on the method:

  • 🔹 Soft reboot: 30–60 seconds.
  • 🔹 Hard reboot: up to 2 minutes (if heavy applications were opened).
  • 🔹 Reboot via Recovery: 2–5 minutes.

If the process takes more than 10 minutes, something went wrong (the file system may be damaged).

❓ Is it possible to cancel the reboot after press?

Yes, but only during the first 3-5 seconds after confirmation. To do this:

  1. Immediately after pressing Reboot hold the button power 10+ seconds.
  2. If the screen goes out - cancellation is impossible.