Forgot your password Realme and can’t unlock your phone? Or did the screen suddenly stop responding to touches after an update? The situation is familiar to many owners of smartphones of this brand. Fortunately, there are several official and unofficial methods for restoring access - from using an account Google to a full reset via Recovery Mode.

In this article we will analyze all current unlocking methods for models Realme 5/6/7/8/9/10/11, Narzo, GT and other lines, including cases when the phone does not respond to touches, requires a PUK code or is locked after unsuccessful password entry attempts. Important: some methods lead to data lossso try safe options first.

If your Realme is blocked due to a software failure (for example, after flashing), the algorithm actions will be different from the situation when you simply forgot the pattern key. We will separately consider both scenarios, and also give recommendations to prevent blocking in the future.

📊 Your Realme is blocked due to
Forgot your password/pattern
Failure after update
Problems with the sensor
Other reasons

1. Unlocking via Google account (for Android 9 and below)

This method only works on older versions Android (up to 10th inclusive) and requires that an account be linked on the phone Google. If you recently reset the settings or bought a used phone, the method may not work.

After 5 unsuccessful attempts to enter the password, a button Forgot your password? or Forgot pattern?will appear on the screen. Click on it and follow the instructions:

  • 🔑 Enter the email address associated with the device and the account password Google.
  • 📱 Confirm unlocking via SMS or backup email (if two-factor authentication is enabled).
  • ⚙️ Set a new password or pattern.

⚠️ Attention: On Realme s Android 11+ this method is disabled by default due to security policy Google. If the button Forgot your password? does not appear, proceed to the next method.

If you do not remember your account details Google, try restoring access via Google recovery page. Please note that after changing the password, it may take up to 72 hours to synchronize with the device.

💡

Before purchasing a used phone Realme always check if the previous account is unlinked Google (FRP). Otherwise, unlocking may not be possible without the help of the seller.

2. Using the "Find My Device" function

Service Find My Device from Google allows you not only to track the location of your smartphone, but also unlock it remotely. Conditions:

  • 📶 The phone is connected to the Internet (mobile data or Wi-Fi).
  • 🔄 The function Find device is enabled in the settings.
  • 🔑 You have access to the account Googlelinked to the phone.

Instructions:

  1. Go to the site Find My Device from a computer or another phone.
  2. Select your Realme from the list of devices.
  3. Click Block device (yes, exactly “block”, not “unblock”).
  4. Enter new temporary password (it will replace old).
  5. Confirm the action and wait for synchronization (may take up to 5 minutes).
  6. Enter a new password on a locked one Realme.

⚠️ Attention: If the phone has data transfer disabled or is low, this method will not work. Also, after unlocking, you may need to re-link some accounts (for example WhatsApp or banking applications).

If the function Find device is disabled, try enabling it via Google Play on another device (if provided that the main account is linked):

☑️ Preparing for remote unlocking

Done: 0 / 4

3. Reset via Recovery Mode (Hard Reset)

If the previous methods did not help, it remains hard reset —delete all data from the phone. This method works on all Realme modelsincluding Realme C3, Realme 8 Pro, Realme GT Neo 2 and others, but has a critical drawback: you will lose all photos, contacts and applications not saved in the cloud.

Instructions for logging in Recovery Mode:

  1. Turn off the phone (press and hold the power button for 10 seconds).
  2. Press the button combination:
    • 🔘 For most models: Volume up + Power.
    • 🔘 For Realme X2 Pro, Realme 7 Pro: Volume down + Power.
  • Hold the buttons until the logo appears Realme, then release.
  • B menu Recovery select a language (if available) and go to Wipe data → Format data.
  • Confirm the action (you may be required to enter a password if encryption is enabled).
  • After reset, select Reboot system.

    • ⚠️ Attention: On some models (Realme UI 3.0+) after the reset, you will need to enter the data Google accountthat was linked before blocking (protection FRP). If you do not remember your login/password, the phone will remain locked!

    If after resetting Realme requires PUK code (for SIM card), you can get from your telecom operator (call from another phone to a hotline or through your personal account).

    What to do if Recovery Mode does not open?

    If the button combination does not work, try connecting the phone to charge for 10 minutes, then try again. On some models (Realme X50 Pro), you may need to hold the buttons for up to 20 seconds. If the Recovery menu does not appear, the firmware may be damaged - in this case, only flashing it via Fastboot.

    4. Unlocking via ADB (for advanced users)

    The method is suitable if the phone USB debugging is enabled (USB Debugging) has access to a computer. This is a rare case, but if you have previously activated this mode, you can try to delete the file with the password via ADB.

    Step-by-step guide:

    1. Connect Realme to the PC via a USB cable (original!).
    2. Open the command line (Win + R → enter cmd).
    3. Enter the commands in order: 
      adb devices

      (the serial number of your phone should be displayed)

      adb shell

      su
      

      rm /data/system/gesture.key

      or for password:

      rm /data/system/password.key
    4. Reboot your phone: 
      reboot

      5. After rebooting, the lock screen should disappear. If an error appears no devices/emulators foundcheck:

      • 🔌 Cable and USB port (try a different cable).
      • 🖥️ Have the drivers been installed? data-i="164">On ADB (you can download from the website Google or through Realme Flash Tool).
      • 🔄 Is USB debugging enabled in the developer settings.

      ⚠️ Attention: On Android 10+ this method often does not work due to enhanced protection. Also, after deleting the password files, an error may occur Unfortunately, System UI has stopped - in this case, only a reset via Recovery.

      💡

      ADB unlocking works only if debugging will help. via USB was enabled IN ADVANCE. If you have not activated this mode, the method is useless.

      5. Official Realme service centers

      If independent unlocking attempts are unsuccessful, contact Realme official service center. data-i="172">official Realme service center

      • 🔧 Guaranteed data retention (in some cases).
      • 📄 Official warranty for repairs.
      • 🔑 Ability to unlock even with protection enabled FRP.

      What you will need to apply:

      • 📄 Receipts or warranty card (if the phone is under warranty).
      • 🆔 Passport or other document confirming ownership.
      • 📱 Phone IMEI (can be found through the box or sticker under battery).

      The cost of unlocking in the service varies from 500 to 2000 rubles depending on the model and the reason for the blocking. Some phones (Realme GT, Realme X7) may require flashing, which increases the price.

      📍 Addresses of service centers can be found at realme official website. Before your visit, check by phone whether they are engaged in unlocking your particular model.

      💡

      If the phone was purchased abroad (for example, Realme 9 Pro+ 5G for India), Russian service centers may refuse to repair it. In this case, contact specialized workshops for working with MTKprocessors.

      6. Alternative methods (at your own risk)

      If all legal methods have been exhausted, some users resort to unofficial methods. We we do not recommend use them, but for completeness of information we will list the possible options:

      Method Description Risks
      Firmware via Fastboot Installing official firmware via PC with deletion of all data. Loss of warranty, risk of the phone being "bricked."
      Use FRP Bypasstools Bypassing Google protection through special apps (for example, Realme FRP Tool). VirusTotal often detects such utilities as malicious.
      Flashing via SP Flash Tool For phones with a processor Mediatek (for example, Realme C11). Requires skills, possible loss of IMEI.
      Chip OFF (resoldering) Physical removal of the memory chip to reset the password. Expensive, risk of damage to the board, does not work on new models.

      ⚠️ Attention: Unofficial firmware and bypass tools FRP often contain spyware or Trojans. If you still decide to take this step, use a virtual machine and check files via VirusTotal.

      For firmware via Fastboot you will need:

      • 🖥️ Computer with Windows 10/11.
      • 🔌 Original USB cable.
      • 📥 Official firmware for your model (you can download it on Realme website).
      • 🛠️ Utilities Fastboot i ADB.

      If you are not confident in your skills, it is better to contact the service. Incorrect firmware can turn the phone into a “brick” - it will only be possible to restore it with the help of a programmer.

      7. How to avoid blocking in the future

      To avoid encountering the problem of a locked screen again, follow these recommendations:

      • 🔐 Use fingerprint or face recognition as an additional unlocking method.
      • ☁️ Regularly save important data to Google Drive or Realme Cloud.
      • 📝 Write down the backup PIN code from the SIM card (PUK) to a safe place.
      • 🔧 Enable the function Smart Lock (in the security settings) so that the phone is unlocked in trusted places (for example, at home).
      • 📱 Set up a backup email for your account Google.

      Also useful know:

      • On Android 12+ (for example, Realme UI 4.0) when resetting the settings, you may be required to enter the password for the last Google account, even if the phone was not locked.
      • Some banking applications (for example, SberBank Online) block access when changing the firmware or resetting the settings.

    If you often forget passwords, use password managers (for example, Bitwarden or 1Password), where you can store backup copies of PIN codes and graphic keys.

    FAQ: Frequently asked questions about unlocking Realme

    ❓ The phone is locked after updating to Realme UI 4.0. What to do?

    If the screen does not respond to touches after the update, try:

    1. Force restart the phone (hold Power + Volume up for 15 seconds).
    2. If this does not help, perform a reset via Recovery Mode (see section 3).
    3. If the sensor does not work even in the Recovery menu, contact the service - a flashing may be required.

    On some models (Realme 9 Pro+) after the update before Android 13 bugs arise with the sensor. In this case, rolling back to the previous firmware version will help.

    ❓ Is it possible to unlock Realme without losing data?

    Yes, but only if:

    • You have USB debugging enabled (ADB method).
    • The phone is linked to the account Google, and you remember the login data (for Android 9 and below).
    • You are using the service Find My Device (see section 2).

    In all other cases, the data will be deleted.

    ❓ After the reset, Realme requires the old Google password. How to bypass?

    This is protection FRP (Factory Reset Protection). You cannot bypass it legally, but you can:

    1. Enter the correct account details Googlethat was linked before the reset.
    2. If you do not remember the password, restore it through Google recovery page.
    3. If the phone was purchased used, contact the previous owner to unlink account.

    ⚠️ Unofficial bypass methods FRP (via TalkBack or OTG) often stop working after security updates.

    ❓ The sensor on Realme does not work, but the phone included. How to unlock?

    If the screen responds to touch partially or does not respond at all:

    1. Connect USB mouse via an OTG adapter - this way you can control the phone.
    2. If the mouse does not help, try connecting the phone to TV via HDMI (if supported).
    3. Reset via Recovery Mode (see section 3).

    If the sensor is physically damaged (cracks, dents), the display will need to be replaced.

    ❓ Is it possible to unlock Realme via IMEI?

    No, IMEI is not used to unlock the screen. It is needed only for:

    • Checking your phone for theft (through services like IMEI.info).
    • Restoring access to the network (if the phone is blacklisted by the operator).

    If you are offered to “unlock by IMEI" for money, this is a scam.

    If your the situation is not described in the article, check the phone model and version Realme UI (can be found in the settings in the section About the phone). The available unlocking methods depend on this.

    Remember: prevention is always cheaper than repair. Set up backup unlock methods and regularly save important data to the cloud!