Smart watches Amazfit GTS have become a popular choice due to their stylish design and functionality, but the initial setup often raises questions among new users. The main difficulty lies not in simply turning on the device, but in correctly pairing it with the operating system Android through specialized software. Many owners make the mistake of trying to connect the gadget exclusively through the standard Bluetooth menu of the smartphone, which leads to notifications and fitness tracker not working.
To successfully integrate the watch into your ecosystem, you need to complete a sequence of actions, including preparing the phone, installing a proprietary application and correctly setting permissions. The process may vary depending on the Android version and your smartphone manufacturer's skin, but the basic algorithm remains the same. In this article, we will analyze each step in detail so that you can enjoy all the capabilities of your device without technical failures.
Preparing your smartphone and watch for pairing
Before starting the procedure, make sure that your smartphone meets the minimum system requirements. For stable operation Amazfit GTS it is recommended to use devices with a version of Android no lower than 5.0, although modern models require 8.0 and higher to fully support all functions. It is critical that the module is enabled on the phone Bluetooth and geolocation (GPS) is activated, as the Android operating system uses location services to find peripheral devices.
Charge the watch to at least 20-30% to avoid sudden shutdown during the firmware update process, which can occur immediately after connection. The watch screen should display a welcome menu with a QR code or waiting for pairing. If the device was previously connected to another phone, it must be reset to factory settings through the menu of the gadget itself to avoid address conflicts.
⚠️ Attention: Do not try to create a pair through the Bluetooth settings on the phone before installing the application. This will cause the smartphone to “hijack” the device, and the application Zepp will not be able to find the watch for the initial configuration.
Check that you have a stable Internet connection on your smartphone, as when you first launch the application, it will download the necessary resources and exercise database. It is also recommended to disable the power saving mode on the phone during setup so that the system does not limit the background activity of the installer.
Installing and setting up the Zepp application
The central element of the ecosystem Amazfit is the application Zepp (formerly known as Mi Fit). It is through this software interface that the watch is managed, health data is synchronized and dials are installed. The application should be downloaded exclusively from the official store Google Play Marketto ensure the absence of malicious code and the latest security updates.
After installation, launch the application and create an account Zepp Account or log in through an existing Google/Facebook profile. Registration is required to save the history of your activity in the cloud. During the registration process, the application will request access to various phone functions: contacts, location, notifications and memory. You must grant all requested permissions, otherwise synchronization will not work correctly.
When you first enter the Zepp application, select your region and units of measurement (metric system) right away, since changing them later without resetting the data can be problematic.
In the main menu of the application, go to the tab Profile in the lower right corner of the screen. Here you will see a button Add device. Click on it and select your watch model from the list - in this case Amazfit GTS or GTS 2/2 Miniif you have a modified version. The application will automatically go into device search mode.
- 📱 Make sure the watch screen is active and displays the pairing code.
- 🔋 Check that Bluetooth on your smartphone sees other devices, confirming that it is working properly module.
- 🌐 Disable VPN services during pairing, they can block local search for devices.
Connection and authorization process
When the application finds your watch, an image of the device and a pairing request will appear on the smartphone screen. At the same time, the display Amazfit GTS will display a system message requesting confirmation of communication. You need to press the check mark or confirm button directly on the watch. Without this action, the process will not complete, even if the phone shows a successful connection.
After confirmation on the watch, the application will begin the pairing procedure. This step can take from 30 seconds to 2 minutes. At this time, a logo Zepp or a loading indicator may appear on the watch screen. Do not take your smartphone far from the watch and do not lock the phone screen at this moment, so as not to interrupt the exchange of encryption keys.
☑️ Stages of successful pairing
If you see a "Failed to connect" error message or the process is stuck at 99%, try rebooting both devices and trying again. Sometimes clearing the application cache Zepp through the Android settings: Settings → Applications → Zepp → Memory → Clear cachehelps. This will not delete your data, but it will reset temporary files that may have become corrupted.
What to do if the watch is not visible in the application?
If the search does not produce results, go to your phone's Bluetooth settings, Find the Amazfit GTS entry in the list of previously paired devices and click “Forget device” or “Cancel pairing”. After that, restart the search in the Zepp application.
Setting up Android notifications and permissions
The most common problem after connecting is the lack of notifications from instant messengers and calls on the watch. This is due to Android's aggressive memory management policy, which kills background processes to save battery. In order to Amazfit GTS receive data, you need to configure auto-start and work in the background for the application Zepp.
Go to the smartphone settings and find the section Applications or Application Manager. Find it in the list Zepp and open its parameters. You need to find the "Autorun" item and enable it. Next, go to the "Battery Saver" or "Battery" section for this application and select the mode No restrictions or Allow background activity. This is a critical step for Xiaomi, Huawei and Samsung owners.
| Smartphone manufacturer | Name of the protection setting | Required action |
|---|---|---|
| Xiaomi / Redmi / POCO | MIUI Optimization | Enable "Autorun" and pin the application in memory (lock). |
| Samsung | Sleep mode | Add Zepp to "Never sleep applications." |
| Huawei / Honor | Launch applications | Disable automatic control, turn on all three toggle switches manually. |
| OnePlus / OPPO | Battery optimization | Select "Do not optimize" for the Zepp application. |
Next inside the application itself Zepp go to the watch profile and find the section Application notifications. Here you will see a list of all apps installed on your phone. Activate the switches next to those instant messengers and social networks whose messages you want to see on your wrist. Remember that the watch only duplicates the notification; if you read a message on your phone, it will disappear from the watch screen.
⚠️ Attention: For notifications to work, the smartphone screen must be unlocked at least once after rebooting. If the phone was restarted and you did not enter a PIN code or fingerprint, the Android system blocks data transfer to third-party applications for security purposes.
Solving problems with data synchronization
Sometimes users are faced with a situation where the watch is connected, but data on steps, heart rate or sleep is not updated in the application. Most often, this indicates a loss of communication between modules or a failure in the service Google Fitif you are using integration. First of all, check if Bluetooth is turned on and if the phone is within a radius of 5-10 meters from the watch.
Try to force synchronization. To do this, open the application Zepp on the main screen and drag the list down until the update animation appears. If the data is not loaded, check the date and time settings on your smartphone. They must be set to "Auto" mode (via network). Time desynchronization even for a few minutes can lead to an error in checking connection security certificates.
In rare cases, rebinding the device helps. Go to your watch profile in the app, scroll to the bottom and select Untie. After this, reset the clock through the menu Settings → System → Reset and repeat the connection procedure from the very beginning. This eliminates configuration errors accumulated during use.
The stability of the connection is 90% dependent on the correct Android energy saving settings, and not on the health of the Bluetooth module of the watch itself.
Additional features and software updates
After successful connection, it is strongly recommended to immediately check for firmware updates. Developers regularly release patches that improve sensor accuracy and correct pairing errors. A notification about the new version will appear in the device profile in the application Zepp . The update process takes from 5 to 15 minutes, during which the watch may overload.
It is important to ensure that the battery charge is at least 50% before starting the update and do not close the application Zepp on the smartphone screen. Interrupting the firmware writing process can lead to the device becoming “bricked”, although modern models Amazfit implement protection against such failures. Also in this section, you can customize watch faces by downloading new ones from the store or creating your own from a photo.
⚠️ Attention: The Zepp application interface and menu item names may vary slightly depending on the software version and regional localization. If you do not find the described function, use the search within the application or refer to the help.
Now your watch is completely ready for use. You can track your workouts, monitor your sleep quality, and stay connected without taking your phone out of your pocket. Regular synchronization will allow you to see a complete picture of your activity over long periods of time.
Frequently asked questions (FAQ)
Can Amazfit GTS be connected to two phones at the same time?
No, the Bluetooth architecture and Zepp apps do not support simultaneous active connections with two smartphones. The watch can only be linked to one account and one device. To switch, you need to untie the watch from the first phone and tie it to the second, which takes time to synchronize the data.
Why does the watch not vibrate when there is an incoming call?
Check three conditions: is the Do Not Disturb mode enabled on the watch itself, is access to the call log allowed in the Zepp application settings on the phone, and is it disabled? vibration in the sound settings of the smartphone. Also make sure that the phone screen is not locked when you call for the first time after unlocking.
How to reset the clock if I forgot the password or it froze?
If the menu is available, go to Settings → System → Reset. If the sensor does not respond, hold down the only side button for 15-20 seconds until a forced reboot. After turning on, immediately perform a reset through the menu. Full flashing via the engineering menu is not available to the average user.
Does the watch work without connecting to a phone?
Yes, the basic functions work autonomously: time display, alarm clock, stopwatch, step counting and heart rate measurement are stored in memory hours. However, without periodically connecting to your smartphone, data will not be saved to the application history, and you will not be able to receive notifications or update the weather.
Is the watch compatible with Android tablets?
Technically, yes, you can install the Zepp app on your tablet and connect the watch. However, the functionality will be limited, since tablets are rarely used for calls and SMS, so the corresponding notifications will not be received. Activity tracking and notifications from applications installed on the tablet will work correctly.