Modern wearable gadgets, such as the popular model M4, have become an integral accessory for smartphone users. However, the initial setup process often causes difficulties for beginners, especially when standard methods of searching for devices through the Bluetooth menu do not give the desired result. It is important to understand that smart watches this type requires special software for full operation, and not just a wireless connection.
In this article we will analyze in detail the entire path from unboxing the device to full synchronization of notifications and health functions. You will learn which application you need to install, how to create an account correctly, and what to do if your phone does not see the gadget. Following the algorithm of actions will allow you to avoid common mistakes and save time on setup.
Preparing to pair devices
Before trying to pair two devices, you need to make sure that both gadgets are in working order and ready for interaction. Charge M4 watch to a level of at least 50%, as the initial setup and firmware update process may require significant energy resources. A low battery charge often leads to a loss of connection at the most crucial moment.
On your smartphone running Android you should turn on the wireless communication module. Go to settings and activate Bluetooth, and also make sure that geolocation (GPS) is enabled. Many users ignore this point, but modern data transfer protocols for wearable devices require access to location in order to correctly search for peripherals.
⚠️ Attention: Do not try to pair your watch exclusively through the Bluetooth system menu in the phone settings. This will cause the device to connect as a headset, but will not transmit steps or notifications.
Also check your smartphone's operating system version. Although M4 are compatible with most devices, for stable operation of the companion application, an Android version of at least 5.0 or 6.0 is desirable. Outdated software may cause conflicts when installing the necessary drivers and services.
Before starting setup, clear the list of paired devices in the phone's Bluetooth menu, if there are old entries about watches or bracelets, to avoid address conflicts.
Selecting and installing the correct application
The key element of the ecosystem is specialized software. For the model M4 the application Fundoo or WearProis most often used, but the exact name depends on the specific firmware revision and device batch. Information about the required software is usually contained in the paper instructions included in the kit, or on the box in the form of a QR code.
It is recommended to download the application strictly from official stores, such as Google Play Market. Using third-party APK files from unverified resources may result in the installation of malware or incorrect synchronization. In the store's search bar, enter the name specified in the instructions and check the developer.
After installation, run the app and grant it all requested permissions. This is a critical stage: without access to Contacts, SMS, Call log and Notifications the watch will not be able to duplicate information from the smartphone. The Android system may prompt you for confirmation several times, especially when running in the background.
- 📱 Register an account inside the application using your email or phone number.
- 🔒 Allow access to geolocation upon first launch, otherwise searching for the device will not be possible.
- 🔋 Disable the power saving mode for the application itself in the phone settings so that the connection is not interrupted.
The process of searching and connecting a watch
Now that the software base is prepared, you can begin direct connection. Open the installed application and go to the Devices or My devicessection, which is usually located in the bottom menu or sidebar. Press the button Add device or the plus icon.
Turn on the clock if it is already off. A QR code may appear on the watch screen for quick pairing, or it will automatically go into connection standby mode. The application on your phone will begin searching for available gadgets within Bluetooth range. This process may take from 10 to 30 seconds.
When your model name appears in the list (for example, M4 or a combination of letters and numbers), click on it. A pairing confirmation request with or without a code will appear on the smartphone screen and on the watch display. You must confirm the action on both devices by clicking the check mark or the confirmation button.
Sequence of actions:1. Open the application on your phone.
2. Click "Add device".
3. Wait for "M4" to appear in the list.
4. Confirm (Pairing) on both screens.
After successful connection, the watch may prompt you to update the firmware. It is strongly recommended to agree to the update, as new software versions often correct battery consumption errors and improve sensor accuracy. Do not interrupt this process and keep the phone near the watch.
☑️ Successful connection
Configuring notifications and health functions
After the basic connection is established, most users are faced with the fact that notifications do not arrive. This is due to Android's aggressive energy saving policies. You need to manually configure the application's access to notifications from the desired instant messengers and social networks.
Inside the application, find the section Notification settings or Push notifications. Here you will see a list of all apps installed on your phone. Activate the switches next to those applications from which you want to see messages on your wrist: WhatsApp, Telegram, Viber and others.
For the correct operation of health monitoring functions, such as counting steps and measuring heart rate, you must enter your anthropometric measurements data. Go to your user profile and enter height, weight, date of birth and gender. These parameters are used by algorithms to calculate calories burned and distance traveled.
| Function | Required resolution | Where to set |
|---|---|---|
| Pedometer | Motion sensors / Fitness | Phone settings -> Applications |
| Calls | Contacts / Phone | Watch application menu |
| Pulse | Background work | Battery settings |
| Weather | Geolocation (GPS) | System settings |
It is also worth paying attention to the language display settings. If the watch shows hieroglyphs instead of Russian text, go to the device settings in the application and change the interface language to Russian. After this, the watch may reboot to apply the changes.
⚠️ Attention: The application interface and set of functions may vary slightly depending on the firmware version of the watch and the update of the application itself. Always check the current menus in your software version.
Solving problems with connection and synchronization
Despite the simplicity of the procedure, sometimes situations arise when the phone does not see the clock or the connection is constantly interrupted. Most often, the problem lies in the fact that the Android system “kills” the background process of the application to save battery. This is typical behavior for many shells, such as MIUI, EMUI or OneUI.
To fix this, you need to add the application to the system exceptions. Go to Settings phone, select Applications, find your watch software and open item Battery or Energy saving. Set the mode No restrictions or No restrict. This will allow the app to work constantly.
If the watch was previously paired with another phone, it may not connect to the new device. In this case, you need to perform a hard reset on the watch itself. This is usually done through the settings menu on the watch screen (item Reset or Reset) or by holding the touch button for a long time.
What to do if the watch is not charging?
If the watch does not respond to the charger, check the contacts on the back panel. They could have oxidized from sweat or moisture. Wipe them with a dry soft cloth or a cotton swab dipped in alcohol and try again. Also make sure that the cable fits tightly against the magnetic contacts.
In cases where nothing helps, try deleting the application, rebooting your smartphone, clearing the Bluetooth cache (via the developer menu or application settings) and installing the software again. This often solves problems with frozen detection services.
The stability of a smartwatch depends 90% on the correct energy saving settings in the smartphone, and not on the malfunction of the gadget itself.
Additional features and personalization
After successful setup, a wide range of possibilities for customizing the device opens up. The app allows you to change watch faces by uploading new images from the gallery or choosing from the built-in collection. This makes the accessory unique and suitable for your clothing style or mood.
You can also customize vibration alerts and screen brightness. For example, set the brightness to automatically increase when you raise your hand (Wake on wrist raise) or disable this function to save energy. Adjusting the hand lift sensitivity is especially important if the watch goes off too often or, conversely, does not respond to movement.
Don't forget about the phone search function. If you lose your smartphone in your apartment, activating this feature on your watch will make the phone ring loudly, even if it is in silent mode. This is a convenient option that is worth testing immediately after setup.
- 🎨 Upload your photo to the watch face through the "Watch faces" section in the application.
- ⏰ Set alarms directly on the watch - they will work even without a phone.
- 💧 Set reminders about drinking water and a sedentary lifestyle.
Device operation M4 becomes comfortable only after carefully customizing all parameters for yourself. Don't be afraid to experiment with the settings in the app to find the perfect balance between functionality and battery life.
Why doesn't the watch show notifications from WhatsApp?
Most likely, in the app settings on your phone there is no checkmark next to WhatsApp in the notifications section. Also check if your phone has Do Not Disturb mode enabled, which blocks pop-ups.
Can you reply to messages from your M4 watch?
The M4 model usually only supports viewing incoming messages. The function of sending responses (by voice or templates) depends on the specific firmware version and is most often not available in budget models of this class.
How to reset the watch to factory settings?
Go to the watch menu, find the "Settings" item (gear icon), scroll down to the "Reset" or "Factory settings" item and confirm the action. The watch will reboot and delete all data.
Why does the watch battery drain quickly?
The main reasons: constant screen backlight, frequent heart rate measurement (every minute), active Do Not Disturb mode with constant vibration, or outdated firmware. Disable unnecessary functions in the application.
Is the M4 watch suitable for swimming?
Most M4 models are waterproof against splashes and rain, but are not designed for full-fledged underwater swimming. Prolonged immersion can lead to moisture getting inside the case and damage to the electronics.