Modern wearable gadgets have become an integral part of a healthy lifestyle, and the model Fit Pro deservedly occupies a leading position due to its accessibility and functionality. However, many users have difficulty with the initial setup, since the pairing process has its own specific features that differ from conventional Bluetooth headphones. The correct sequence of actions guarantees stable operation of the tracker and accurate transmission of data on heart rate and steps.
In this article we will analyze in detail the algorithm for connecting the device to smartphones based on the operating system Android. You will learn what software you need to install, how to avoid common mistakes when searching for a device, and what to do if the gadget does not appear in the list of available ones. Following these instructions will help you quickly activate all the functions of your new assistant.
Preparing the device and smartphone for pairing
Before starting setup, make sure that your Fit Pro is fully charged. A low battery may cause the band to not turn on or enter detection mode. Connect the device to the charging cable for 15-20 minutes, even if the indicator shows the presence of energy.
On the fitness bracelet itself, you must activate the connection standby mode. Usually, when you turn it on for the first time, a QR code or Bluetooth icon appears on the screen, which means it is ready to use. If the screen goes dark, simply touch the touchpad or press the side button (depending on the case modification) to wake up the display.
On your smartphone, turn on the wireless module. Go to Settings → Bluetooth and make sure the slider is activated. It is important to note that for correct operation Fit Pro does not require manual pairing through the standard Bluetooth menu of your phone. Trying to connect the bracelet like regular headphones often leads to data synchronization errors in the future.
Do not try to find the device in the general list of Bluetooth gadgets on your phone. Pairing occurs exclusively within the proprietary application for the correct transfer of data protocols.
⚠️ Attention: If you previously tried to connect the bracelet through the phone settings and it remained in the "Paired devices" list, be sure to remove it from there (select "Forget the device" or "Cancel pairing") before starting the official setup.
Installing and configuring the proprietary applications
The key element of the ecosystem Fit Pro is a special mobile application that acts as an intermediary between the bracelet hardware and the smartphone operating system. Without it, the device will remain just a watch with basic functionality. For Android users, the main application is FitPro (sometimes found under the name WearPro depending on the firmware revision).
You can download the app in two ways. The most reliable way is to scan the QR code that appears on the screen of the bracelet itself when turned on, or find it in the paper instructions. The phone camera will automatically redirect you to the store Google Play or offer you to download the APK file. The second option is to manually search for the name "FitPro" in the app store.
After installation, launch the application. You will need to register an account or log in through social networks so that your health data is saved in the cloud and is not lost when you change your phone. When you first launch the application, you will be asked for a number of permissions.
- 📍 Geolocation (GPS): mandatory permission for Android 6.0 and higher, required for the operation of the Bluetooth Low Energy module.
- 📞 Phone and Contacts: required to display the names of callers on the bracelet screen.
- 🔔 Notifications: allows you to broadcast messages from instant messengers on your wrist.
The process of registering and linking a bracelet
After providing all the necessary permissions, go to the main page of the application. At the bottom of the screen, find a tab, usually indicated by Device or a clock icon. Click the button Bind Device (Link device) or + in the upper right corner.
The application will begin automatically searching for devices within range. Yours should appear in the list Fit Pro with the corresponding identifier (often these are the last digits of the MAC address or the model name). Click on the name of the device to begin the pairing procedure.
A confirmation request in the form of a check mark or vibration may appear on the bracelet screen. Confirm the action. After a successful connection, the application will download the current time, date and basic user profile settings, synchronizing them with the clock.
Sequence of actions:1. Open the FitPro application
2. Tab "My" or "Device"
3. Click "Bind Device"
4. Select Fit Pro from the list
5. Confirm on the bracelet screen
☑️ Checklist for successful connection
Setting up notifications and health functions
After successful binding, it is recommended to immediately set up notifications so as not to miss important calls or messages. In the application menu, find the section Message Reminder or Reminders. Here you can select specific applications, notifications from which will be duplicated on the bracelet screen.
Please note that for this function to work, the application FitPro
Also in this section, health monitoring parameters are configured. You can set heart rate measurement intervals, enable sleep or activity monitoring. The more often measurements are taken, the faster the battery drains, so find a balance between data accuracy and autonomy.
⚠️ Attention: Notification settings may be reset after restarting the phone if the application was completely closed by the system. It is recommended to pin the application in memory (lock it in the recent tasks menu).
Solving problems with connection and synchronization
The first connection does not always go smoothly. Users often encounter situations where the application does not see the bracelet or the connection is constantly disconnected. First of all, check the Bluetooth version on your smartphone - it must be at least 4.0 to support the protocol BLE (Bluetooth Low Energy).
If the device is on the list but does not connect, try restarting both gadgets. Turn off and on Bluetooth on your phone, and also restart Fit Pro through the settings menu on the bracelet itself (usually section Settings → Reset). This will clear the connection cache.
Another common problem is application version conflicts. Make sure you have downloaded the latest version from an official source. Old versions may not work correctly with new versions of Android.
What to do if the bracelet is frozen and does not respond?
If the touch screen of the bracelet does not respond to touches and it does not turn off, connect it to a charger. In 90% of cases, this will bring the device out of a frozen state. If it doesn’t help, leave it on charge for 1 hour, then try resetting it with the button (if available) or by long pressing the sensor (15-20 seconds).
| Problem | Possible reason | Solution |
|---|---|---|
| The application does not see bracelet | Geolocation disabled | Enable GPS in phone settings |
| No notifications | The application is closed in the background | Pin the application in memory, give permission to autorun |
| Incorrect time | No synchronization | Open the application and wait for the data to update |
| Frequent disconnections | Interference or low charge | Charge the bracelet, move closer to phone |
Interface personalization and additional features
One of the main advantages of the model Fit Pro is the ability to change dials. In the application, go to the Dial or Dialssection. There is a catalog of available designs that can be downloaded and installed on the device.
The installation process takes from 30 seconds to 2 minutes, depending on the complexity of the graphics and the speed of the Bluetooth connection. While transferring a file, do not move far from the phone and do not close the application so as not to damage the interface firmware file.
You can also change the interface language of the bracelet itself in the settings. By default, it is often installed in English, but Russian language support is present in most firmware versions. The change is applied instantly after selecting from the list of languages.
Changing the watch face is the most popular feature, but it consumes a significant amount of traffic and energy when loading. Download new themes only with sufficient battery charge.
⚠️ Attention: The application interface and available functions may vary slightly depending on the firmware version of your specific bracelet. Manufacturers regularly update software, so the location of some menu items may change.
Frequently asked questions (FAQ)
Can the Fit Pro be connected to two phones at the same time?
No, the Bluetooth Low Energy architecture in this model does not support active pairing with two devices at the same time. To switch between phones, you must first unbind the device in the application on the first phone, and then pair it on the second.
Why does the bracelet not count steps accurately?
An error of 5-10% is normal for optical sensors of this class. To improve accuracy, make sure that the bracelet fits snugly on your wrist (but does not squeeze it) and is 1-2 cm away from the bone. Also check in the application whether your height and stride length are correct.
How to reset the bracelet to factory settings?
This can be done in two ways. The first is through the menu of the bracelet itself: Settings → Reset. The second is through the app: go to the device settings in the application and select Unbind (Unlink) or Restore Factory Settings. After this, the device will delete all accumulated data.
Does Fit Pro support payment via NFC?
In the vast majority of cases, the model Fit Pro is not equipped with an NFC module for contactless payment. The NFC function in the phone settings when connected is used solely to improve the quality of searching for a Bluetooth signal, and not for payments.
Can I swim with the Fit Pro bracelet?
The device is splash- and sweat-resistant (IP67 standard or equivalent), which allows you to wash your hands or get caught in the rain. However, immersion in water, especially in salty sea water or a hot bath/sauna, is not recommended, as this can damage the seal of the case and the electronics.