Haval Jolion is a popular crossover with a modern multimedia system, but connection Android Auto often raises questions among owners. Unlike smartphones with Apple CarPlaywhere the connection usually works out of the box, with Android nuances may arise: from lack of screen response to synchronization errors. This article will help you understand all the stages - from preparing the phone to fine-tuning the connection, including solutions to typical problems.

We will look at two main connection methods: by USB cable (the most stable) and by Wi-Fi/Bluetooth (wireless, but with limitations). We will pay special attention to models Jolion 2020–2026, since the versions of the multimedia system in them are different. If your car is equipped with a screen older than 2020, check the compatibility at the end of the article - there is a list of supported firmware.

Before you start, make sure that your smartphone meets the minimum requirements: Android 10 or later (for wireless connection - Android 11+) and the application is installed Android Auto (you can download it in Google Play). Also prepare a high-quality USB cable with support for data transfer - charging cables are often not suitable!

1. Checking the compatibility of Haval Jolion with Android Auto

Not all versions Haval Jolion support Android Auto out of the box. Main compatibility criteria:

  • 📅 Car year of manufacture: models from 2020 are equipped with a multimedia system Haval Smartwhich officially supports Android Auto. Cars from 2019 and older may require a firmware update.
  • 🖥️ Multimedia version: check the item in the system settings About the app. Current versions: V2.0.5 and higher for a wired connection, V3.1.2+ for a wireless connection.
  • 📱 Android version on the smartphone: minimal Android 10 (for USB) and Android 11 (for Wi-Fi). On Android 9 and below, the connection is possible, but with errors.

How to find the version of the multimedia system in Haval Jolion:

  1. Launch the main multimedia menu.
  2. Go to Settings → System → About.
  3. Find the lines Software version and Build number —they should start with Haval_Smart_....
💡

If there is no item in the menu Android Auto, update the multimedia firmware through the official service Haval. Self-updating may lead to failures!

For models Jolion 2021–2023 with a screen 10.25" or 12.3" connection Android Auto usually goes without problems. Owners of cars produced in 2020 are advised to check for updates through the dealership - some early batches were delivered with stripped-down firmware.

2. Preparing your smartphone for connection

Before connecting to Haval Jolion set up your smartphone:

  • 📲 Install the application Android Auto: download it from Google Play (if not installed by default). The version must be no lower 8.0.124 (check in the application settings).
  • 🔌 Enable software debugging USB (for USB connection): go to Settings → About phone → Build number (press 7 times to activate developer mode), then to Settings → System → For developers → USB debugging.
  • 🔒 Allow access to notifications: in settings Android Auto enable the option Show notifications —this is necessary for navigation and calls to work correctly.
  • 📶 Disable battery saving: add Android Auto to the battery optimization exclusion list (in the phone settings).

For wireless connection additionally:

  • 📶 Make sure that Wi-Fi i Bluetooth.
  • 🔄 Reboot your phone before connecting for the first time - this helps to avoid errors synchronization.

Install/update Android Auto on Google Play

Enable USB debugging (for wired connection)

Allow notifications for Android Auto

Disable battery optimization for the application

Restart the phone (recommended)

-->

Important: on some smartphones (for example Xiaomi or Huawei) you must manually enable autorun Android Auto in the security settings. Without this, the application may turn off in the background.

3. Wired connection of Android Auto to Haval Jolion

This is the most reliable method, recommended for most users. Instructions:

  1. Connect the USB cable to the port in Haval Jolion (usually located under the screen or in the central tunnel). Use the port marked USB Media or Android Auto (if available).
  2. On the media screen, select the source Android Auto (may be called Smartphone Projection).
  3. On your smartphone, confirm permission to access data (a notification will appear Allow access to the device?).
  4. Wait for the interface to load Android Auto on the car screen (usually takes 10-30 seconds).

If the connection fails installed:

  • ⚠️ Check the cable - it must support data transfer (not all charger cables are suitable).
  • ⚠️ Try another USB port in the car (if there are several).
  • ⚠️ Reinstall the application Android Auto on phone.
What to do if Haval Jolion does not see the phone?

1. Check if the mode is enabled File transfer (MTP) when connecting the cable (notification on the phone).

2. Update the multimedia system firmware through the dealership.

3. Try resetting the multimedia settings to factory settings (Settings → System → Reset).

4. If nothing helps, contact service - there may be a hardware failure of the port USB.

On models Jolion with multimedia Haval Smart V3.0+ After the first connection, the phone will be recognized automatically. On older versions, you may need to re-confirm permissions each time you connect.

4. Wireless connection (Wi-Fi/Bluetooth)

Wireless Android Auto is available on Haval Jolion with multimedia firmware V3.1.2 and later. To connect:

  1. Make sure that Wi-Fi and Bluetooth.
  2. On the multimedia screen, select Android Auto (Wireless).
  3. On the phone in the application Android Auto select Wireless connection and follow the instructions.
  4. Confirm pairing of devices on both screens.

Wireless limitations:

  • 📵 There may be delays in operation (especially navigation).
  • 🔋 Quick discharge of the phone battery (it is recommended to keep it on charge).
  • 📶 Unstable operation with a weak Wi-Fi signal in the car.

Via USB cable

Via Wi-Fi/Bluetooth

I tried both options, but I prefer the wire

I have not used Android Auto yet-->

For stable operation of wireless Android Auto v Haval Jolion recommended:

  • 🔄 Regularly update the application Android Auto on your phone.
  • 📶 Use a phone with support Wi-Fi 5 GHz (for example, Samsung Galaxy S21+, Google Pixel 6).
  • 🔋 Connect your phone to charge while traveling.

5. Setup Android Auto after connection

After successful connection, configure the interface to suit your needs:

Function How to set up Recommendations
Voice assistant Activate voice command "Ok Google" in settings Android Auto. Useful for managing navigation and calls without taking your eyes off the road.
Navigation Select the default application: Google Maps, Yandex.Navigator or Waze. For Russia it is better to use Yandex.Navigator due to current traffic jams.
Media Add your favorite applications (for example, Spotify, YouTube Music) to the main menu. Download music offline to avoid problems with the mobile data.
Notifications Customize the display of notifications in Settings → Notifications. Disable unnecessary notifications (for example, from social networks) so as not to be distracted.

For owners Haval Jolion s screen 12.3" function available split screen: you can simultaneously display navigation and multimedia. To activate it:

  1. During operation Android Auto press the button Menu on the screen.
  2. Select Split screen and specify applications for the left and the right panel.
💡

Set up automatic start Android Auto when connecting a phone: in the multimedia settings Haval select Autostart → Android Auto. This will save time on every trip.

6. Typical errors and their solutions

Even with correct connection, failures may occur. Let's look at the most common:

  • ❌ Android Auto does not start:
    • 🔌 Check the cable - try the original cable from the phone.
    • 📱 Reboot the phone and multimedia system (Power button on the screen → Reboot).
    • 🔄 Update Android Auto on your phone and multimedia firmware.
  • ❌ The connection is lost:
    • 📵 For a wireless connection, check the stability of Wi-Fi in the car.
    • 🔋 Connect your phone to a charger - low battery may cause gaps.
    • 🚗 Check if other devices are interfering (for example, DVRs with Wi-Fi).
  • ❌ No sound:
    • 🔊 Check the volume level in Android Auto and multimedia system.
    • 🎵 Make sure that the sound is not redirected to the phone (in settings Android Auto select Car speakers).
💡

If Android Auto constantly reboots, try disabling data saving in the phone settings. On some devices (Xiaomi, Oppo) this solves the problem.

For models Haval Jolion 2020 with firmware V2.0.5 an error may appear "Android Auto is not supported"In this case:

  1. Update the multimedia firmware through the dealership.
  2. If the update is not available, use the alternative - MirrorLink (but the functionality will be limited).
⚠️ Attention: if after updating the firmware multimedia Android Auto stopped working, reset the system settings (Settings → System → ResetThis will return the factory settings, but will delete saved navigation points and favorite radio stations.

7. Alternatives to Android Auto for Haval Jolion

If Android Auto does not fit or does not work, consider alternative ways to integrate your smartphone:

  • 🔄 MirrorLink: supported on Haval Jolion with firmware V2.0+. Allows you to duplicate your phone screen, but without optimization for the car. To work, you need to install the application MirrorLink on your phone.
  • 📱 Apple CarPlay: If you have iPhone, this option will be more stable. The connection is similar Android Auto (via USB).
  • 🎵 Bluetooth Audio: for simple listening to music, you can connect your phone via Bluetooth and use the built-in media player.
  • 📱 AutoMate or CarStream: third-party applications for screen duplication. Require root access on the phone and may be unstable.

MirrorLink suitable for simple tasks (calls, music), but does not support voice control and optimized maps. Apple CarPlay also offers a full-fledged alternative for owners iPhone, but it will not help if you Android.

For models Jolion with multimedia V1.0 (until 2020) there are almost no alternatives - you will have to update the firmware or use Bluetooth for audio and a separate holder for the phone with navigation.

8. Updating the media firmware for compatibility

If yours Haval Jolion does not support Android Autoa firmware update may help. Official methods:

  • 🔧 Through the dealership: the most reliable method. The update takes 30–60 minutes and guarantees compatibility.
  • 💻 Independently (for experienced users):
    1. Download the firmware from the official website Haval (section Support → Software updates).
    2. Copy the file to a USB flash drive in the format FAT32.
    3. Connect the flash drive to the USB multimedia port and follow the instructions on the screen.
⚠️ Attention: updating the firmware yourself can lead to failures if you interrupt the process or use the wrong version. We recommend doing this only if you are confident in your actions or under the supervision of a specialist.

After the update:

  • 🔄 Restart the multimedia system (Power button → Reboot).
  • 📱 Reconnect the phone - Android Auto should appear in the menu.
  • 🔧 Check the firmware version in Settings → System → About.

For Haval Jolion 2021–2023, current firmware versions:

  • Haval_Smart_V3.1.2 —basic support Android Auto (USB).
  • Haval_Smart_V3.2.5+ —wireless support Android Auto.
  • Haval_Smart_V4.0.0 —improved stability and new interface.

If after updating Android Auto it still does not work, check:

  • Phone compatibility (some models Huawei without Google services may not be supported).
  • USB debugging settings on the phone.
  • Integrity of the cable and ports.

FAQ: Frequently asked questions about Android Auto in Haval Jolion

Is it possible to connect Android Auto to the 2019 Haval Jolion?

2019 models are not officially supported Android Auto, but some dealers offer a firmware update for an additional fee. An alternative is to use MirrorLink or Bluetooth for audio. Before updating, check compatibility with an authorized dealer. Haval.

Why does Android Auto turn off while driving?

Common causes:

  • 📵 Unstable USB connection (try another cable or port).
  • 🔋 Low phone battery (connect to charger).
  • 📱 Optimizing the battery on your phone (add Android Auto to exceptions).
  • 🚗 Phone overheating (especially in summer) - let it cool down.

    • If the problem persists, update the multimedia firmware.

How to reset Android Auto settings in Haval Jolion?

To reset settings:

  1. On the media screen, go to Settings → Applications → Android Auto.
  2. Select Reset settings or Remove device.
  3. Reboot the multimedia system (Power button → Reboot).

On your phone, also clear the application cache Android Auto in the settings.

Can I use Yandex.Navigator in Android Auto?

Yes, Yandex.Navigator fully compatible from Android Auto. To display it in the menu:

  1. Install the latest version Yandex.Navigator from Google Play.
  2. Run Android Auto on your phone and select Yandex.Navigator as the default application for navigation.
  3. When connected to Haval Jolion the navigator will be available on the screen multimedia.

For correct operation, allow the application to access geodata and notifications.

How to connect two phones to Android Auto at the same time?

Multimedia system Haval Jolion supports only one active device for Android Auto. To switch between phones:

  1. Disconnect the first phone (physically or through the menu Android Auto).
  2. Connect the second phone - it will become active.

To use two phones simultaneously (for example, for music and navigation), you can connect one via Android Auto, and the second via Bluetooth for audio.