Owning a smartphone Honor usually does not cause difficulties, since the Android system with the MagicOS or EMUI shell is as automated as possible. However, when installing a new operator SIM card Tele2 users sometimes encounter a situation where voice communication works, but there is no access to the World Wide Web. This is a classic case when automatic settings were not applied due to software glitches or firmware features.
The solution to the problem lies in manual correction of the access point parameters APN. It is this data that tells your device through which gateway to access the external network. In most cases, simply entering the correct values in the appropriate menu fields is sufficient. The process takes only a couple of minutes, but requires care when entering characters.
In this material we will analyze in detail the algorithm of actions for all current models Honor. You will learn where to look for hidden settings, how to avoid common mistakes when entering data, and what to do if, after all the manipulations, the 4G icon still does not appear. We will also touch on the issues of saving traffic and connecting security.
⚠️ Attention: The menu interface in different versions of the MagicOS shell may differ slightly. The names of the items may vary, but the navigation logic remains the same for the entire Android ecosystem.
Preparing a SIM card and checking coverage
Before moving on to complex manipulations in the menu, you need to make sure that the components are in physical condition. Often the problem is trivial: the SIM card is installed incorrectly or has damaged contacts. Remove the tray, wipe the chip with a dry cloth and make sure it is firmly seated in the socket. Incorrect installation can lead to an unstable connection.
It is also worth checking whether the data service is active on the operator's side. There must be funds on the balance, or a tariff that provides package traffic is connected. Without a positive balance, the network may block access even if the phone settings are perfect. You can check the status through a USSD request or the operator's application.
- 📱 Make sure that the SIM card is detected by the system in a slot that supports 4G/LTE (usually Slot 1).
- 📶 Check the signal level: for stable operation of 4G you need reliable coverage; in an area of uncertain reception, the phone can switch to EDGE, where the Internet works extremely slow.
- 🔒 Unlock the SIM card: if a PIN code is installed, it must be entered immediately after turning on the phone, otherwise access to the network will be limited.
If the physical installation of the card does not raise any questions, and the balance is positive, but there is still no Internet, move on to the software part. Sometimes simply rebooting the device after removing and reinserting the SIM card helps. This allows the system to re-register in the operator’s network with updated parameters.
Automatic configuration via SMS
The easiest way to get the necessary parameters is to use the automatic configuration service from Tele2. The operator stores current settings templates for thousands of device models. When registering on the network for the first time, the system often sends a configuration message itself, but if this does not happen, you can force it.
To do this, just send an SMS message with the text 0 to a short number 1500. In response, you will receive a message with an attached configuration file. You will need to open it and click the Install or Save button. The system will ask you to confirm your actions; you may need to enter a security code, which is usually equal to 1234 or 0000.
⚠️ Attention: Configuration SMS may be blocked by antiviruses or spam filters. Check the “Spam” or “Blocked” folder if the expected message has not arrived within 5-10 minutes.
What to do if the SMS does not arrive?
If the message does not arrive, make sure that the phone’s memory is not full. Also check if the short number 1500 is blocked in the message settings. Sometimes temporarily disabling Wi-Fi while prompting for settings helps.
After successfully installing a profile, do not forget to select it as active. In some cases, the phone retains old profiles from other operators and continues to use them by default. Switching to a new profile Tele2 Internet is the mandatory final step of automatic setup.
Manually setting up an APN access point on Honor
If the automatic method does not work, the only correct solution is manually entering data. This requires care, as an error in even one character will cause the connection to fail. First you need to get to the menu of your mobile networks Honor.
Follow the path: Settings → Mobile network → Mobile data → Access points (APN). Here you will see a list of existing profiles. Tap the "+" icon or the three-dot menu in the corner of the screen to create a new hotspot. Name it, for example, Tele2 Internetso as not to be confused with others.
In the window that opens, you need to fill in several fields. Leave the remaining fields that are not specified in the instructions below blank or at default. Pay special attention to the protocol type and ports if they are required by your tariff plan.
| Parameter | Value | Note |
|---|---|---|
| Name | Tele2 | Any convenient name |
| Access point (APN) | internet.tele2.ru | Case is important, write in lowercase |
| User name | tele2 | Can be left blank |
| Password | tele2 | Can leave empty |
| APN type | default,supl | Or just default |
After entering the data, be sure to click the save menu (three dots → Save). Simply going back is not enough - the changes will not be applied. Then, in the list of access points, activate the created profile by placing a marker next to it. Now check the Internet by turning off Wi-Fi.
☑️ Checking APN settings
Advanced settings and network types
A correctly entered APN is the base, but for maximum speed it is important to configure the preferred network type. In modern smartphones Honor the default mode is “5G/4G/3G/2G (auto)”. However, in areas of unstable coverage, the phone may often “jump” between standards, which causes connection dropouts.
It is recommended to lock your preferred mode. Go to menu Mobile network → Network mode. If you are in a city with good coverage, select 4G/3G/2G (auto). If 4G reception is weak, and 3G is more stable, it makes sense to forcefully select 3G to avoid constant reconnections that drain the battery.
It is also worth paying attention to data roaming. Even if you do not plan to travel abroad, in the border areas of Russia, the phone may try to register in the networks of Tele2’s foreign partners. If the roaming service is not paid for or is not needed, it is better to disable data transfer while roaming in the settings to avoid accidental charges.
- 🚀 Enable the Carrier Aggregation function, if it is available in the engineering menu or hidden settings, this will combine frequencies to increase speed.
- 🔋 Disable “Traffic saving mode” for system processes if you want mail and instant messengers to work in the background without delays.
- 🌐 Reset the network settings to factory settings if, after all the manipulations, strange glitches are observed with switching between Wi-Fi and mobile data.
Use the “Data Transfer” widget in the notification shade to quickly turn the mobile data on and off. This helps save battery power when you are in a Wi-Fi zone, but are afraid that the connection will be interrupted.
Solving problems with 4G/LTE connection
Frequent situation: the settings are entered correctly, the tariff allows, but the phone stubbornly displays 3G or H+, ignoring fourth generation towers. First of all, make sure that your SIM card supports 4G. Old cards from many years ago may not have the appropriate profile. Replace the SIM card at the operator's showroom - it's free and takes 10 minutes.
The second important point is the frequency support of your smartphone. Honor. The Tele2 operator uses different frequency bands in different regions (Band 3, Band 7, Band 20, Band 38). If your phone doesn't support the specific frequency that the tower in your area operates on, 4G won't appear. You can check the model specifications on the manufacturer's official website.
⚠️ Attention: Some Honor models intended for the Chinese market (Global ROM) may not have the Band 20 frequencies required for Russia. This is a physical limitation of the antenna module that cannot be corrected by software.
If everything is in order with the card and frequencies, try switching the network mode. Select manually only LTE (or 4G). If the Internet does not appear, it means that there is no 4G coverage in this location or it is too weak. Return the setting to “Auto” mode so that the phone can use 3G.
The lack of 4G with the correct settings is most often associated with the frequency of a specific phone model or an outdated SIM card, and not with an error in the APN menu.
Security and saving traffic
After setting up the Internet, Don't forget about safety. The operator's mobile network Tele2 uses encryption, but additional security measures would not hurt. Avoid connecting to open Wi-Fi networks for banking transactions. Use the mobile data as a more secure communication channel for important transactions.
The Android system on Honor allows you to control traffic consumption in detail. In the menu Data usage you can set limits, upon reaching which the mobile data will automatically turn off. This will save you from unexpected expenses if you exceed the gigabyte package.
It is also recommended to regularly check which applications have background network access. It often happens that a little-known game or utility “eats” all the traffic in the background, updating content without your knowledge. Disable access to mobile data for heavy applications that require Wi-Fi.
- 🛡️ Enable “Fraud Protection” in the standard “Security” application from Honor, it blocks dangerous sites at the network level.
- 📉 Activate traffic compression in your browser (for example, Chrome or Yandex) so that pages loaded faster and spent less megabytes.
- 🚫 Prevent automatic updating of applications via the mobile network in the Google Play Store and AppGallery settings.
Remember that the telecom operator is constantly updating its requirements and network parameters. If you notice a sharp drop in speed or connection problems, do not exclude the possibility of technical work on the provider’s side. In such cases (waiting patiently) or calling technical support is the best solution.
Frequently asked questions (FAQ)
Why did the Internet not appear immediately after setting the APN?
Sometimes you need to restart the device for the new settings to take effect. Also try turning Airplane Mode (airplane mode) on and off for 10-15 seconds. This will forcibly re-register the phone in the operator’s network with new settings.
Can I use Tele2 settings on an Honor tablet?
Yes, the setup algorithm is identical. The main thing is that the tablet has a cellular communication module installed and uses a Nano-SIM format SIM card (or Micro-SIM depending on the tray). The tariff plan must also provide for the use of the Internet on tablet devices, otherwise the operator may block traffic or require additional payment.
What to do if the APN settings are reset after a reboot?
This may indicate damage to the system configuration file or a conflict with installed third-party software. Try deleting all manually created access points, restarting the phone and creating the profile again. If the problem persists, you may need to reset your network settings to factory settings.
Does APN setting affect Internet speed?
The correct APN ensures connection to the optimal gateway. Using outdated or incorrect settings (for example, WAP instead of Internet) may limit speed or block access to certain resources. However, the channel capacity primarily depends on the quality of coverage and the load on the tower.