How to configure MTS Internet on Android automatically: complete guide for Russia

Setting up mobile data MTS on a smartphone with Android often raises questions from users, especially when it comes to automatic connection without manually entering parameters. In Russia, the operator offers several ways to activate the Internet, but not all of them are equally reliable. This article will help you figure out how to properly configure automatic connection to the MTS network on any Androiddevice - from budget Redmi to flagship Samsung Galaxy.

We will look at official methods (via SMS and USSD commands), alternative options (application My MTS and web account), and we will also look at typical errors due to which the Internet may not work even after automatic setup. We will pay special attention to the features of tariffs MTS 2026 - some of them require additional actions to activate package traffic.

If you just bought a new SIM card or reinstalled the system on your phone, these instructions will save you time. All steps have been tested on the latest versions Android 14 i Android 15, but are also suitable for older devices (starting from Android 8.0).

1. Preparing the phone before setting up the MTS Internet

Before starting the automatic setup, make sure that your smartphone is ready to connect. Skip this stage often leads to failures - for example, the phone may not accept settings from SMS or not save APN parameters.

Here is what you need to check required:

• 📶 Network signal level: the screen should display at least 1-2 bars (if there is no signal, restart the phone or check the coverage area MTS).
• 📱 SIM card: make sure that it is inserted into the slot SIM1 (on some phones, automatic configuration only works for the main slot).
• 🔄 Airplane mode: should be off (check in the notification shade).
• 🔒 PIN code: if the SIM card asks for a PIN when turned on, enter it (by default for new cards MTS this 0000 or 1234).

It is also recommended to update the operator’s network settings. To do this:

1. Go to Settings. → Mobile network → Telecom operators.
2. Select Automatic (not manually!).
3. Wait until the phone finds the network MTS Russia.

If you are using dual-SIM a phone (with two SIM cards), make sure that the Internet is turned on specifically for the slot with MTS. To do this:

1. Go to Settings → SIM cards and mobile networks.
2. Select a SIM card MTS and activate the option Mobile data.

2. Automatic configuration of MTS Internet via SMS

The most reliable way to automatically configure the Internet on Android is to send a USSD command or request settings via SMS. MTS provides both options, but USSD is faster.

For automatic setup, follow these steps:

1. Open the application Phone and go to the tab Keyboard.
2. Enter the command:

   *111*295#

   and press the call button.

3. Wait for the SMS with the settings (will arrive within 1-2 minutes).
4. Save the received settings (usually the phone offers to do this automatically).

If the USSD command did not work (for example, on some phones Xiaomi or Realme), send an SMS with the text:

internet

to number 1234. In response, you will receive a message with the settings - you need to open it and confirm the installation.

Send the USSD command again|Check the balance (must be at least 10₽)|Reboot the phone|Try to send an SMS from another device-->

After saving the settings, reboot the phone. This will help avoid conflicts with previous APN settings (if any).

⚠️ Attention: If you use a tariff MTS with unlimited Internet (for example, Tariff or Ultra), automatic setup may not work. In this case, you will have to enter the APN parameters manually (instructions in the next section).

3. Setting up through the My MTS application

Official application My MTS allows you not only to manage the tariff, but also to automatically configure the Internet. This method is suitable if USSD commands do not work or you prefer a visual interface.

How to set up the Internet through the app:

1. Download My MTS from Google Play (if it is not already installed).
2. Launch the application and log in using your phone number (you will receive an SMS with a confirmation code).
3. Go to the section Services → Internet settings.
4. Click Set up automatically and confirm setting the parameters.

The advantage of this method is that the application itself determines the phone model and sends the current APN settings. In addition, in My MTS you can:

• 📊 View the remaining traffic according to the tariff.
• 🔄 Enable/disable package Internet (useful if you have a tariff with payment for megabytes).
• 🛠️ Update network settings (if the Internet disappeared after the update Android).

If the Internet does not work after setting up through the app, check:

• 🔄 Is mobile data enabled in the phone settings.
• 📶 Is the network selected correctly? (MTS must be active).
• 📱 Are there restrictions for background traffic (in Settings → Applications → My MTS).

4. Manual APN setup for MTS (if the automatic setup did not work)

If the automatic setup did not help, you will have to enter the APN parameters manually. This is relevant for:

• 📱 Old phones (up to Android 7.0).
• 🌍 Tariffs with roaming (for example, if you travel around Russia and connect to partner networks).
• 🔧 Non-standard firmware (Custom ROM, for example, LineageOS).

Instructions for manual setup:

1. Go to Settings → Mobile network → Access points (APN).
2. Click Add (or + in the upper right corner).
3. Fill in the fields with the following data:

Parameter	Value
Name	MTS INTERNET
APN	internet.mts.ru
User name	mts
Password	mts
Authentication type	PAP or CHAP

Leave the remaining fields unchanged (or select Not specifiedAfter filling out, save the settings and save the settings). reboot the phone.

What to do if the Internet does not work after manually entering the APN?

Check that the access point you created is selected in the APN settings (sometimes the phone saves several profiles Also make sure that in the field APN type indicated default or default,supl. If the problem persists, try resetting the network settings to factory settings (Settings → System → Reset → Reset network settings).

⚠️ Attention: Some tariffs MTS (for example, corporate or special) use other APN parameters. Check with the operator at number 0890 (free call).

5. Checking and diagnosing the connection

After setting up the Internet, you need to make sure that everything is working correctly. Here's how to check your connection:

1. Speed test:

• Open a browser and go to the site Speedtest.
• Click GO and wait for the results.
• Normal speed for 4G — from 10 Mbit/s, for 5G — from 50 Mbit/s.

2. Checking the IP address:

• Enter in the browser whatismyip.com.
• If the IP address is displayed MTS (for example, starting with 37. or 95.), then the connection is active.

3. Error diagnostics:

• 🚫 No connection: check your balance (dial *100#) and make sure that the traffic package is activated.
• ⚠️ Slow Internet: you may be connected to 3G instead 4G/5G. In the network settings, select Only LTE or 5G/LTE.
• 🔄 Constant interruptions: try disabling Wi-Fi Assist (in Settings → Wi-Fi), if the phone automatically switches to mobile data.

If diagnostics showed problems, try:

• 🔄 Restart the phone.
• 📶 Manually select the network MTS (instead of automatic search).
• 📱 Delete and re-create an access point APN.

6. Common problems and their solutions

Even after proper configuration, the Internet MTS may not work due to specific errors. Here are the most common cases and how to fix them:

Problem 1: The Internet only works in the browser, but not in applications

This happens if the APN is not specified in the settings APN Type or it is set incorrectly. Solution:

1. Open the APN settings (as in section 4).
2. In the field Type APN enter:

   default,supl

3. Save and reboot the phone.

Problem 2: 4G constantly disappears, switches to 3G

Possible reasons:

• 📶 Weak signal LTE in your region (check coverage on MTS coverage map).
• 📱 Traffic saving mode is enabled in your phone settings (turn it off in Settings → Mobile network).
• 🔧 Outdated phone firmware (update Android to the latest version).

Problem 3: After updating Android, the Internet stopped working

This is one of the most common causes of failures in 2026 - after major updates (for example, from Android 13 to Android 14), APN settings are reset or become irrelevant. Solution:

1. Delete all existing APN access points.
2. Request new settings via USSD (*111*295#).
3. If this does not help, enter the parameters manually (see section 4).

⚠️ Attention: On some phones Samsung after the update, you may need to reset the network settings. To do this, go to Settings → General management → Reset → Reset network settings. This will not delete your data, but will reset all network settings (including Wi-Fi).

7. Setting up MTS Internet on phones with two SIM cards

If your Androidsmartphone supports two SIM cards, setting up the Internet MTS has nuances. The main problem is that the phone can automatically connect to the Internet through a second SIM card (for example, Tele2 or Beeline), even if you want to use MTS.

How to set up the Internet on dual-SIM phone:

1. Go to Settings → SIM cards and mobile networks.
2. Select a SIM card MTS and enable the option Mobile data.
3. Make sure that for the second SIM card mobile data is disabled.
4. If necessary, set MTS as the default SIM card for data transfer.

On phones Xiaomi, Realme and Oppo there is also an option Auto data switching —it is better to turn it off so that the phone does not switch to the second SIM card when the signal is weak MTS.

If the Internet still does not work:

• 🔄 Reboot your phone.
• 📶 Manually select the network MTS for the slot with your SIM card.
• 📱 Check that the APN access point is tied to the slot with MTS (in the APN settings the slot number must be specified, for example, SIM1).

8. Additional tips for stable MTS Internet

To ensure that the Internet MTS works without failures, follow these recommendations:

1. Optimizing network settings

• 📶 Enable LTE only in the network settings if you do not need support 3G/2G.
• 🔄 Disable Auto-connect to open Wi-Fi (in Settings → Wi-Fi) so that the phone does not switch to unreliable networks.

2. traffic

• 📊 Enable Saving traffic in settings Android (limit background data consumption).
• 🔒 Use VPN only when necessary - some services (for example MTS TV) can block traffic through VPN.

3. Firmware update

• 📱 Check for updates regularly Android —new versions are often corrected errors with connecting to networks 4G/5G.
• 🛠️ If after the update the Internet is lost, reset the network settings (see section 6).

4. Checking coverage

• 🌍 If you travel frequently, use MTS coverage mapto find out if 4G/5G is supported in your region.
• 📡 In weak signal areas, try using Wi-Fi Calling (if your tariff and phone support this function).

If you use MTS for Internet banking or work, it is recommended:

• 🔒 Enable Safe Data Mode (in some firmware MIUI or One UI).
• 🛡️ Install an antivirus (for example, Kaspersky or Dr.Web) to avoid data leaks through the mobile network.

FAQ: Answers to frequently asked questions

🔹 Why does MTS Internet not work after automatic setup?

Possible reasons:

• The traffic package is not activated on your tariff (check via *100#).
• The phone did not save the APN settings (try entering them manually).
• The SIM card is not activated (new cards are activated within 24 hours).

Solution: restart the phone, check the balance and repeat the setup.

🔹 How can I find out which APN is used on my phone?

Go to Settings → Mobile network → Access points (APN). There will be a list of available profiles. The active APN is usually marked with a dot or a checkmark.

🔹 Is it possible to use APN settings from MTS on another operator?

No, each operator uses its own APN settings If you change your SIM card (for example, from MTS on Beeline), you need to request new settings from the new operator.

🔹 Why does MTS Internet work slowly, although the signal is full?

Possible reasons:

• Network congestion in your region (especially during peak hours).
• Speed limit by tariff (check in your personal account MTS).
• VPN or proxy is active (turn them off in the settings).

Solution: restart the phone, check the speed on Speedtest and contact support MTS at 0890.

🔹 How to reset network settings on Android if the Internet is not is it working?

Instructions:

1. Go to Settings → System → Reset.
2. Select Reset network settings (or Resetting Wi-Fi, mobile network and Bluetooth).
3. Confirm the action and restart the phone.

After the reset, you will have to reconfigure the Internet (via USSD or manually).