Connecting non-original AirPods Pro to Android: a complete guide

Non-original AirPods Pro is a popular choice among users Androidwho want to get a stylish design and acceptable sound quality at an affordable price. However, connecting such headphones to smartphones based Android is often accompanied by problems: from the lack of a stable connection to control gestures that do not work. In this article, we will look at all the nuances of pairing, setting up and troubleshooting typical problems.

The main difficulty is that non-original AirPods Pro (often called “replicas” or “clones”) do not support proprietary functions Apple, such as automatic switching between devices or optimized sound through chip H1/W1. But this does not mean that they cannot be used with Android - it just requires the right approach. Below you will find proven connection methods, tips for improving compatibility, and answers to frequently asked questions.

1. Preparing non-original AirPods Pro for connection

Before pairing with Android you need to make sure that the headphones are ready for use. Non-original AirPods Pro often supplied in "sleep" mode or with factory settings, which may block detection by Bluetooth.

First of all, check the charge of the headphones and the case: connect the case to the charger for 10–15 minutes, even if the indicator shows charge. Many replicas have inaccurate battery level sensors. Then reset the headphones:

• 🔋 Put both headphones in the case and close the lid.
• 📱 Open the lid and hold the button on the back of the case 15–20 secondsuntil the indicator starts flashing red and white (or only white, depending on the model).
• 🔄 Close the lid and open it again - the headphones should go into pairing mode (the indicator blinks white).

If the indicator does not blink, try an alternative method: remove the headphones from the case and hold the touchpad on each of them data-i="58">until you hear a beep. This will force the search mode to activate. 10 secondsuntil you hear a beep. This will force search mode to activate.

2. Step-by-step connection to an Android smartphone

When the headphones are ready, proceed to pairing. The algorithm may differ slightly depending on the version Android and shell (for example, MIUI, One UI, ColorOS), but the general steps are the same:

1. Activate Bluetooth on the smartphone: go in Settings → Connections → Bluetooth (or Settings → Devices → Bluetooth on some models).
2. Open the case with headphones and leave them inside. The indicator should blink white (pairing mode).
3. In the list of available devices, find a name containing "AirPods Pro", "TWS" or "i12" (depending on the replica model). Click on it.
4. Confirm pairingif a connection request appears (sometimes you need to enter a standard PIN code 0000 or 1234).

After successful connection, check the functionality:

• 🎧 The sound should play synchronously in both headphones (if you can hear it in only one - see the "Troubleshooting" section).
• 🎛️ Control gestures (touch, double-click) may work partially or not work at all - this is normal for most replicas.
• 🔋 The charge level of the headphones and case may be displayed incorrectly (or not displayed at all).

3. Setting up sound and controls

Non-original AirPods Pro rarely support all the functions of the original headphones Apple, but basic parameters can be configured manually. sound:

Go to Settings → Sound → Sound quality and effects (path may vary). Select:

• 🎵 Bluetooth codec: preferred AAC (provides better quality, than SBC, but may cause delays). data-i="107">: for bass, select preset AAC missing, select SBC.
• 🔊 Sound normalization: Turn off if the sound is too quiet.
• 🎚️ Equalizer: For bass, select a preset "Bass" or "Electronics" (adjust manually if available).

For gesture control:

Gesture	Original AirPods Pro	Non-original (replica)	How to set up
Single touch	Play/pause	Often does not work	Use the buttons on your smartphone or the player widget
Double tap	Next track / Previous track	May work randomly	Disable in Bluetooth settings (if available)
Hold	Switching noise reduction modes	Normally does not function	Use third-party applications (see below)

For advanced control, install applications like AirBattery or Podroid (available in Google Play). They allow you to:

• 📊 Display the charge level of the headphones and case.
• 🔄 Set up gestures (if supported by the replica).
• 🎧 Enable/disable noise reduction (if supported by hardware).

4. Typical problems and their solutions

Even after successful connection, users encounter a number of problems and ways to solve them.

4.1. Headphones are not detected via Bluetooth

If Android sees AirPods Pro:

• 🔄 Restart your smartphone and headphones (reset button on the case).
• 📱 Clear Bluetooth cache: go to Settings → Applications → Show all applications → Bluetooth, press Storage → Clear cache.
• 🚫 Delete old connections: in the list of paired devices, delete all entries with the name "AirPods" or "TWS".

4.2. Sound in only one earphone

This is one of the most common problems with replicas. Reasons and solutions:

• 🔋 One earphone is discharged: put both in the case for 5-10 minutes.
• 🔄 Resetting the headphones: hold the button on the case for 15 seconds, then reconnect.
• 🎧 Firmware mismatch: some replicas require headphones to be synchronized with each other. To do this:
1. Remove both headphones from the case.
2. Hold the touch panel on right the headphone for 5 seconds until the indicator blinks.
3. Repeat for left headphone.

What to do if the reset does not help?

If after several attempts to reset the headphones still do not work are synced, try connecting them to another device (for example, a friend or tablet). Sometimes this “wakes up” the headphones, after which they begin to work correctly with iPhone friend or tablet). Sometimes this “wakes up” the headphones, after which they begin to work correctly with Android.

4.3. Constant connection interruptions

If the sound is interrupted or the headphones turn off:

• 📶 Bluetooth interference: move away from sources of interference (Wi-Fi routers, microwaves, other Bluetooth devices).
• 🔋 Low charge: charge the headphones and case up to 100%.
• 📱 Bluetooth version: on smartphones with Bluetooth 4.0 or lower, the connection will be unstable. Check the version in Settings → About phone → Bluetooth version.
💡

If breaks occur only when moving (for example, while jogging), the problem may be poor contact of the antenna inside the headphones. In this case, only repair or replacement will help.

5. How to check the authenticity of AirPods Pro

If you doubt the originality of the headphones, there are several ways to check. Please note that even high-quality replicas can imitate some features of the original AirPods Pro, but a complete match cannot be achieved.

Main differences:

Feature	Original AirPods Pro	Non-original (replica)
Serial number	Checked on the website Apple (checkcoverage.apple.com)	Does not pass verification or gives an error
Sound when connected	Clear voice: "AirPods Pro connected"	Distorted voice or no sound
Indicator on the case	Soft white glow, smooth flashing	Bright blue/green light, sharp flashing
Headphone weight	~5.4 g each	Often heavier (6-7 g)

To check the serial number:

1. Open cover the case and look at the number on the inside (or on the sticker under the headphones).
2. Go to the website checkcoverage.apple.com, enter the number.
3. If the website displays a message "We were unable to confirm your serial number" —the headphones are not original.

6. Alternative connection methods

If standard pairing does not work, try alternative methods. They can help in cases where the headphones “can’t be seen” or are connected with errors.

6.1. Connection via application

Some replicas require special applications to activate. Try:

• 📱 AirPods Clone Connect (available in Google Play).
• 🎧 TWS Checker —helps determine the replica model and suggest optimal settings.

Instructions:

1. Install the application and open it.
2. Follow the instructions on the screen (usually you need to hold the button on case and select the headphone model in the list).
3. After connection, additional settings may appear in the application (for example, adjusting microphone sensitivity).

6.2. Manually adding a device

If the headphones are not displayed in the list of available ones:

1. Go to Settings → Bluetooth.
2. Click Add device (or Connect new device).
3. Select Other device or Manual input.
4. Enter the model name (for example, i12 TWS) and confirm the connection.
What to do if the headphones are connected as "LE-Audio"?

Some replicas support a protocol LE Audio, which may conflict with the standard one A2DP. In this case, go to the Bluetooth settings, find the connected ones. AirPods Pro, click on the gear next to the name and select Use for media or Enable high-quality sound.

7. Optimizing the performance of non-original AirPods Pro

To improve connection stability and sound quality, follow these tips:

• 🔋 Regularly update the headphone firmware (if the replica manufacturer provides updates). To do this, use branded applications (for example, i12 Updater for models i12 TWS).
• 📱 Turn off power saving for Bluetooth: go to Settings → Battery → Battery optimization, find Bluetooth and select Unlimited.
• 🎵 Use the codec LDAC (if supported): it provides better sound quality than AAC, but may increase delays.
• 🔄 Reset the headphone settings every 1-2 monthsto avoid error accumulation.

Important: some replicas AirPods Pro have a hidden "Low Latency" mode, which reduces audio delays, but reduces quality. It is activated by triple tapping on the touch panel (does not work on all models).

💡

If you use headphones for gaming or watching videos, turn on the game audio mode in the Bluetooth settings (if available). This will reduce latency, but may degrade the quality of the music.

8. Frequently asked questions (FAQ)

❓ Why do non-original AirPods Pro discharge so quickly?
Replicas are usually equipped with less capacious batteries (30–50 mAh versus 50–60 mAh in the original) and less efficient power controllers. In addition, many non-original headphones are not optimized for energy saving, like original ones AirPods Pro with a chip H1.
To extend operating time:
• 🔋 Disconnect your Bluetooth headphones when not in use.
• 📴 Store them in a case (even discharged headphones lose charge more slowly in the case).
• 🔄 Use low-power modes if they are available in the manufacturer's app.
❓ Is it possible to flash non-original AirPods Pro with Apple firmware?

No, it is impossible. The original firmware is designed for specific hardware (chip, proprietary speakers and microphones). An attempt to flash a replica with the original firmware will lead to: Apple designed for specific hardware (chip H1/W1, branded speakers and microphones). An attempt to flash a replica with the original firmware will lead to:

• 🚫 Complete loss of functionality of the headphones.
• 🔥 Overheating and failure of the controller.
• 📵 Impossibility of recovery even through a service center.

Some replica manufacturers release their own firmware with improved compatibility, but they do not add the functions of the original ones AirPods Pro.

❓ Why doesn't noise cancellation work in non-original AirPods Pro?

Noise cancellation (ANC) in original ones AirPods Pro implemented in hardware using specialized microphones and a processor H1. In remarks:

• 🎤 Low quality microphones that are not able to accurately pick up external noise.
• 🔧 There is no software sound processing (algorithms Apple patented).
• 📉 Even if the function is declared manufacturer, its effectiveness is minimal.

Some models (for example, i300 TWS) have a “pseudo-ANC” mode, which simply dampens the high frequencies, but does not remove the noise completely.

❓ How to reset non-original AirPods Pro if the button on the case does not work?

If the reset button on the case is broken or does not respond, try alternative methods:

1. Soft reset: connect headphones to Android, open the control application (for example, Podroid) and select the option Reset or Factory settings.
2. Manual reset via headphones:
1. Remove both headphones from case.
2. Hold the touchpads on both headphones for 10 secondsuntil the indicators start flashing red.
3. Put the headphones back in the case and close the lid for 30 seconds.
3. Connecting to another device: sometimes the reset occurs automatically the first time you connect to iPhone or MacBook.

If all else fails, the problem may be a hardware malfunction of the controller - in this case, repair is required.

❓ Is it possible to use non-original AirPods Pro with an iPhone?
Yes, but with limitations. Replicas will connect to iPhone as usual Bluetoothheadphones, but:
• ❌ There will be no automatic switching between devices Apple.
• ❌ Functions like "Find my AirPods" or "Spatial audio" will not work.
• ⚠️ There may be problems with the microphone during calls (voices will sound quiet or with interference).
• 📊 The charge level may be displayed incorrectly or not displayed at all.
To connect:
1. Open the case cover and hold the reset button until the indicator starts flashing white.
2. On iPhone go to Settings → Bluetooth and select headphones in the list.

If you encounter a problem not described in the article, check the model of your replica (usually indicated on a sticker inside the case or on the box) and look for instructions specifically for it. Many non-original manufacturers produce proprietary manuals that can be found on official websites or in support groups. AirPods Pro issue proprietary manuals that can be found on official websites or in support groups.

📊 Did you manage to connect non-original AirPods Pro to Android?
Yes, the first time
Yes, but I had to tinker
No, it didn’t work
I haven’t tried it yet