Fitness bracelet Amazfit Bip S from Huami remains a popular choice among Android users due to the balance of price, functionality and autonomy. However, the process of connecting to a smartphone for the first time may raise questions - especially if you have not previously worked with devices on the platform Zepp OS (formerly Mi Fit). Unlike classic smartwatches, Bip S requires not only the installation of a proprietary application, but also the correct setting of permissions, without which synchronization of data (steps, heart rate, notifications) will be impossible.

In this article we will analyze the entire process - from preparing the smartphone to solving typical problems like “the bracelet does not see” or “the connection is constantly lost.” We will pay special attention Android power saving settings, which often block background operation of the application Zepp, as well as the nuances of working with different versions of the operating system (from Android 8.0 to Android 14). If you have already tried to connect Bip S and encountered an error, skip the first two sections and go straight to troubleshooting section.

1. Preparing your smartphone: what you need to do before connecting

Before you start synchronizing, make sure that your Android smartphone meets the minimum requirements:

  • 📱 Android version: not lower 5.0 (recommended 8.0+ for stable work).
  • 🔄 Bluetooth: version 4.0 BLE or later (check in your phone settings).
  • 📶 Internet: a stable connection to Wi-Fi or a mobile network to download the application and flash the bracelet firmware.
  • 🔋 Bracelet charge: at least 20% (if the charge is low Bip S may turn off during setup).

Also remove old versions of applications Mi Fit or Amazfit, if they were installed previously, they conflict with the new software Zepp. To do this:

  1. Open Settings → Applications.
  2. Find Mi Fit or Amazfit in the list.
  3. Click Delete and confirm the action.
⚠️ Attention: If you used the bracelet with another smartphone, reset it to factory settings via Bracelet settings → System → Reset. This will eliminate conflicts when reconnecting.
📊 What fitness bracelet are you using?
Amazfit Bip S
Xiaomi Mi Band
Huawei Band
Samsung Galaxy Fit
Other

2. Installing and setting up the Zepp application

The official application for control Amazfit Bip S is called Zepp (previously Amazfit). It can be downloaded:

  • 🌐 From Google Play (recommended method).
  • 📱 Via APK file from the official website Amazfit (if your region is not supported in the Play Market).

After installation:

  1. Launch Zepp and create an account (you can use email, phone number or account Google).
  2. Select region Russia (or your country) - this is important for the correct display of weather and notifications.
  3. Allow all application requests:
    • 📍 Geolocation (to track routes).
    • 📱 Notifications (to synchronize SMS and calls).
    • 🔋 Autostart (so that the application runs in the background).

On smartphones with MIUI (Xiaomi), EMUI (Huawei) or One UI (Samsung) shell, you must manually add Zepp to the list "Protected applications" and disable battery optimization for it. Otherwise, the connection with the bracelet will be interrupted.

Download the Zepp application|Create an account|Allow geolocation and notifications|Disable battery optimization for Zepp|Charge the bracelet to 20%+-->

3. phone

Now we move on to synchronization:

  1. Turn on Bluetooth on the smartphone (Settings → Connections → Bluetooth).
  2. Activate the bracelet:
    • Press and hold the side button Bip S for 3 seconds until the QR code appears.
    • If the bracelet has already been used, reset it through Settings → System → Reset.
  • Add a device to Zepp:
    • In the application, click Profile → Add device.
    • Select Amazfit Bip S from the list.
    • Scan the QR code from bracelet screen or enter its number manually.
    • Confirm pairing on both devices.

      • The synchronization process will take 1-2 minutes. After successful connection, the main menu will appear on the bracelet screen, and the application Zepp will display data about the device (firmware version, charge level, etc.).

      Problem Cause Solution
      The bracelet is not located Bluetooth is turned off or the bracelet is low Turn on Bluetooth, charge Bip S up to 50%
      Error "Could not connect" Conflict with another device in Zepp Remove the old device in Profile → My devices
      Synchronization is interrupted Energy saving Android blocks Zepp Add Zepp to the battery exceptions (see section 4)
      💡

      If the bracelet is not detected, try restarting both the smartphone and Bip S. To reboot the bracelet, hold the side button for 10 seconds until the Amazfit logo appears.

      4. Setting up permissions and energy saving

      A common problem for users Amazfit Bip S — Automatic disconnection after a few hours. This is due to Android's aggressive battery optimization. To fix:

      For all versions of Android:

      1. Open Settings → Applications → Zepp.
      2. Select Battery → Battery optimization.
      3. Find Zepp in the list and select Do not optimize.

      For Xiaomi smartphones (MIUI):

      1. Go in Settings → Battery and performance → Battery management.
      2. Select Zepp and install No restrictions.
      3. Enable Autorun and Lock for the application.

      For Samsung smartphones (One UI):

      1. Open Settings → Device care → Battery.
      2. Click ⋮ → Settings → Sleeping applications.
      3. Make sure that Zepp is not in the sleep list.
    ⚠️ Attention: Some firmware (for example ColorOS from Oppo/Realme) may require additional permission to Working in the background. Check your phone's security settings.
    What to do if notifications do not arrive?

    If the bracelet does not receive notifications about calls or messages, check:

    1. Are notifications enabled for Zepp in Android settings (Settings → Applications → Zepp → Notifications).

    2. Are notifications allowed for specific applications (WhatsApp, Telegram, etc.) in Zepp itself (Profile → Notifications → Manage notifications).

    3. Is the Do Not Disturb mode on the bracelet blocking them (check in Bracelet settings → Modes).

    5. Troubleshooting: the bracelet does not connect

    If Amazfit Bip S does not synchronize with your smartphone, follow this algorithm:

    🔍 The bracelet is not detected during search

    • 🔋 Check the charge of the bracelet (at least 20%).
    • 🔄 Restart your smartphone and Bip S.
    • 📱 Remove Bip S from the list of paired Bluetooth devices on your phone (Settings → Bluetooth → ⚙️ next to Amazfit Bip S → Forget device).
    • 🔄 Repeat the connection process from scratch.

    ⚠️ Error "Connection failed" or "Synchronization failed"

    • 📋 Remove the device from your account Zepp (Profile → My devices → Delete).
    • 🔄 Reset the bracelet (Settings → System → Reset).
    • 📱 Reinstall the application Zepp.
    • 🔄 Try connecting from another smartphone (to eliminate the problem in phone).

    📵 The connection is constantly disconnected

    • ⚡ Check the energy saving settings (see section 4).
    • 📶 Make sure there is no interference from other Bluetooth devices (headphones, speakers).
    • 🔄 Update bracelet firmware via Zepp (Profile → Amazfit Bip S → Firmware update).

    If the problem persists, contact support Amazfit via the app Zepp (Profile → Help and feedback) indicating:

    • Smartphone models and Android versions.
    • Application versions Zepp.
    • Error descriptions (screenshot welcome).
      • 💡

      In 90% of cases, problems with connection can be resolved by resetting the bracelet and re-configuring permissions for Zepp. Only after this should you contact support.

      6. Firmware update and additional settings

      After successful connection, it is recommended to update the firmware Amazfit Bip S to the latest version. This will fix possible bugs and add new features. To update:

      1. Open Zepp and go to Profile → Amazfit Bip S.
      2. Click Firmware update.
      3. Confirm the download and wait for completion (the bracelet will reboot automatically).

      Also configure the key parameters of the bracelet:

      • 🔔 Notifications: select applications from which notifications will be duplicated on Bip S (Profile → Notifications).
      • 🌍 Language and region: set the Russian language and the correct time zone (Bracelet settings → System).
      • 🏃 Sports modes: add frequently used activities to favorites (Profile → Sports).
      • 🔒 Screen lock: enable PIN code for data protection (Bracelet settings → Security).
      ⚠️ Attention: Do not interrupt the firmware update process! If the bracelet is stuck during the installation stage, wait 10-15 minutes. If there is no change, reset by holding the side buttons.

      7. Compatibility with other devices and accessories

      Amazfit Bip S supports work not only with smartphones, but also with other gadgets:

      • 🎧 Bluetooth headphones: can be connected to a bracelet for listening to music (if the model supports it A2DP).
      • 💻 PC/laptop: for data synchronization via Zepp on Windows/macOS (official software required).
      • 🚴 Bicycle sensors: compatible with ANT+ (adapter required).

      To connect headphones:

      1. Activate the search mode on the headphones.
      2. On Bip S go in Settings → Bluetooth.
      3. Select headphones from the list of available devices.

      Please note: at the same time the bracelet can be paired with only one smartphoneIf you want to reconnect it to another phone, first remove Bip S from. account Zepp on the first device.

      FAQ: Frequently asked questions about Amazfit Bip S

      Can Amazfit Bip S be connected to an iPhone?

      Yes, but with restrictions. The application Zepp is available for iOS, but on iPhone the following do not work:

      • Answering calls from the bracelet.
      • Notifications from some instant messengers (due to Apple restrictions).
      • Some widgets.

      For full operation, Android is recommended.

      How to reset Amazfit Bip S if it does not respond?

      Perform hard reset:

      1. Charge the bracelet to at least 30%.
      2. Hold the side button for 15-20 seconds until the logo appears Amazfit.
      3. After rebooting, repeat the setting from scratch.
      Why does the bracelet discharge quickly?

      Main reasons:

      • 🔍 Always on heart rate monitor (turn off in Settings → Heartbeat → Measurement frequency).
      • 📶 Frequent notifications (limit the list of applications to Zepp).
      • 🔄 Outdated firmware (update via the app).
      • 🌡️ Low temperature (below 0°C reduces battery life).

      Normal battery life on a single charge is 7–15 days (depending on intensity use).

      Is it possible to swim with Amazfit Bip S?

      Yes, the bracelet has protection 5 ATMwhich allows you to:

      • Swim in a pool or open water.
      • Accept shower.
      • Wash your hands with a bracelet.

      However it is not recommended:

      • Dive to a depth of more than 50 meters.
      • Use in hot water (sauna, bath).
      • Press buttons under water.
      How to transfer data from Amazfit Bip S to a new phone?

      The data is stored in the account Zepp, so:

      1. Install Zepp on a new smartphone and log in to the same account.
      2. Add Bip S as a new device.
      3. All historical data (steps, sleep, workouts) will be loaded automatically.

      If you want to save the data locally, export it via Profile → Data export format CSV.