Integration of your smartphone with the multimedia system of a modern crossover has become not just a convenient option, but a necessity for comfortable driving. Owners Belgee X70 often face the need to display navigation or music from the phone screen on a large car display, but standard menus are not always intuitive at first glance. Correctly setting up communication between devices opens up access to full multimedia functions, allowing you to control applications directly from the machine’s touch screen.
The synchronization process can be carried out either wirelessly or via a cable connection, each of which has its own characteristics and advantages. In this article we will analyze in detail all the ways to Connect Android to the Belgee X70, consider the operation of the proprietary application and standard protocols. You will learn what nuances should be taken into account for stable operation of the system and how to avoid common mistakes during the first pairing.
Preparing devices for pairing
Before starting setup, make sure that the current version of the operating system is installed on your smartphone, since older builds of Android may not work correctly with new data transfer protocols. It's also critical to check the condition of the USB cable you plan to use: it must support data transfer, not just charging the device. Cheap cables included with some gadgets often lack data lines, making connection impossible.
In the car, you need to start the engine or switch the ignition to ACCso that the multimedia system receives sufficient power to operate the wireless modules. On the head unit screen, go to the main menu and find the section responsible for connecting mobile devices. It is usually indicated by a smartphone icon or the inscription Phone Link.
The communication modules on the phone should be turned on in advance. For a wireless connection, activate Bluetooth i Wi-Fi, and for a cable connection, enable USB debugging mode if the system requires extended access rights. However, in most cases, for basic operation EasyConnection additional developer permissions are not required.
⚠️ Attention: If you use a metal-coated protective glass or a case that covers the smartphone's antennas, this may significantly degrade the quality of the wireless signal. It is recommended to remove the case during the initial connection setup.
☑️ Ready to connect
Wireless connection via EasyConnection
The most popular method of integrating a smartphone with multimedia Belgee X70 is the use of technology EasyConnection (may also be called PhoneLink or TLink depending on the software version). This protocol allows you to duplicate the Android screen on the car display without using wires, ensuring high driver mobility.
To get started, select the icon on the radio screen EasyConnection and switch to wireless connection mode. The system will begin searching for available devices and display your phone's name or a special pairing code. On your smartphone, in the list of available Wi-Fi networks, you need to find an access point with a name containing CarKit or Auto, and connect to it.
After connecting to the car's Wi-Fi network, a request may appear on the phone screen to allow data usage or to launch a mirroring application. Confirm the action, and after a few seconds the image from your Android smartphone will appear on the crossover screen. This method is ideal for watching videos or using navigators that do not support standard Android Auto.
Connecting via a USB cable
The cable connection provides more stable data transfer and simultaneous charging of the smartphone, which is especially important for long trips using navigation. Connect a high-quality USB cable to the port in the car, which is usually indicated by a smartphone symbol or located in the center console near the gearshift lever.
Once the physical connection is established, a notification about the new device should appear on the screen of the head unit Belgee X70 . Select the connection mode Android Auto or USB Connection in the menu that appears. On the phone screen you will need to confirm permission to access data and trust in this computer or car.
If the connection is successful, the interface will change to a simplified shell with large icons for controlling music, calls and maps. It is important to note that when using a cable, some mirroring functions may be limited by Google security policies, unlike full screen projection mode over Wi-Fi.
⚠️ Note: The interface and available ports may vary depending on the Belgee X70 configuration and software version. Check the location of the connectors with the owner's manual for your specific vehicle, as manufacturers may make changes to the interior configuration.
Use the original cable from your smartphone or certified analogues no longer than 1 meter. Wires that are too long may cause signal loss and interruption of Android Auto operation.
Android Auto setup and compatibility
Native support Android Auto in Belgee X70 allows you to use an optimized interface for driving, but requires proper configuration on the phone side. Make sure that the Android Auto application from the store is installed on your smartphone Google Play and it is updated to the latest version. In the phone settings, in the “Connected devices” section, check whether the “Run Android Auto” item is activated.
When connecting for the first time, the system may request access to contacts, call logs and messages. Granting these permissions is necessary for the voice assistant to function fully and to safely read notifications out loud. If the interface does not start automatically, try manually launching the application on your phone after connecting the cable.
Compatibility depends on the Android version: version Android 8.0 and higher is recommended for correct operation. On older versions of the system, some functions may be unstable or absent altogether. It is also worth checking whether the power saving mode is turned on on the phone, which can block the background operation of the service.
| Connection type | Signal stability | Charging the phone | Supported functions |
|---|---|---|---|
| USB cable | High | Yes (fast) | Android Auto, Navigation, Calls |
| Wi-Fi (EasyConnection) | Medium | No (discharges) | Full screen mirroring, Video |
| Bluetooth | High | No | Audio and phone book only |
Elimination of common connection problems
Even with proper configuration, users may encounter a situation where the phone is not detected by the system or the connection is constantly interrupted. A common cause is a Bluetooth profile conflict: if the phone has previously been paired with another car, it may try to connect to it automatically, ignoring the Belgee X70. In this case, you need to delete old pairings in the phone settings.
Another common problem is incompatibility of video or audio formats when using mirroring mode. If you launch a video file and there is a black background with sound on the car screen, it means that the codec is not supported by the head unit. In this case, installing a third-party video player on Android that supports hardware acceleration will help.
If the system sees the phone, but cannot establish a data connection, try rebooting the multimedia unit. To do this, it is usually enough to hold down the power button on the radio for 10 seconds until the manufacturer’s logo appears. This action resets temporary network stack errors without losing user settings.
What to do if Android Auto crashes?
Frequent crashes of the Android Auto application may be due to a lack of RAM on your smartphone. Try closing all background applications before connecting to your car and clearing the service cache in your phone settings.
⚠️ Warning: Using screen mirroring features and watching videos while driving may be prohibited by your country's traffic regulations. Use these features only when the car is stationary.
Optimizing the operation of the multimedia system
To ensure maximum system performance, it is recommended to periodically clear the application cache EasyConnection or Android Auto in the settings of the car itself. Go to the head unit settings menu, find the “Applications” section and select the appropriate service to clear temporary files.
It is also worth paying attention to the brightness and screen resolution settings when connecting. Some smartphones may display images at a non-standard resolution, which may cause the image on the Belgee X70 display to appear stretched or have black bars. In the phone settings in the “For Developers” section, you can try changing the minimum screen width or simulating additional space.
Regular updating of the vehicle software at the dealer or through OTA channels (if available) guarantees the receipt of new drivers for communication modules. Manufacturers often release patches that improve compatibility with new smartphone models entering the market.
The stability of the system depends 90% on the quality of the USB cable used and the absence of conflicts with previously saved devices in the phone's memory.
Why does the phone connect, but the screen is not duplicated?
Most often the problem lies in the lack of permission to display on top of other applications or in the fact that the “Charge only” mode is selected. Check the notifications on your phone immediately after connecting and select file transfer mode or MTP.
Is it possible to use two phones simultaneously with the Belgee X70?
The standard system allows you to store profiles of several devices, but active screen mirroring or Android Auto work is usually available only for one connected smartphone at a particular time.
How to disable sound when connecting?
Pairing audio signals are controlled in the general sound settings of the head unit. Find the “System sounds” or “Interface sounds” item and adjust the notification volume to a minimum.
Does the Belgee X70 support wireless Android Auto?
Support for the wireless protocol depends on the specific software version and configuration. In most cases, stable operation of Android Auto requires a cable connection, while Wireless projection is available through the proprietary EasyConnection application.