The smartphone Honor 8A remains a popular choice for those looking for a reliable entry-level device, and one of its key features is support for wireless audio. Owners often wonder how to quickly and without errors connect a phone to a new one in order to enjoy music or conversations wirelessly. The pairing process in the EMUI shell installed on this model is intuitive, but has its own nuances that should be taken into account for stable operation. wireless headphonesto enjoy music or conversations wirelessly. The pairing process in the EMUI shell installed on this model is intuitive, but has its own nuances that should be taken into account for stable operation.
In this article we will analyze in detail the entire algorithm of actions: from activating the search mode on the headset to eliminating typical communication problems. Correctly setting up the data link will help you avoid audio delays and connection dropouts while listening to podcasts or watching videos.
Preparing devices for pairing
Before starting setup, make sure that both devices are sufficiently charged, as low energy levels may prevent the successful completion of the search procedure. On the smartphone itself Honor 8A you need to unlock the screen and go to the main menu, where all system utilities are located.
Turn on your headphones by holding the power button or the special pairing key for a few seconds until the indicator starts flashing blue or red-blue. This signal means that the device has switched to Visibility mode and is ready to be detected by external gadgets. If the indicator is not blinking, refer to the instructions for your specific headset model, as the methods for entering the mode may vary.
On your phone, swipe down from top to open the quick settings panel and find the icon Bluetooth. Click on it to activate the communication module, and then hold your finger on the icon for a couple more seconds to go to the advanced settings menu. Here you will see a list of available devices and the status of the current connection.
⚠️ Attention: Make sure that the headphones are not currently connected to another phone or tablet nearby, as they may automatically restore the old connection and not appear in the search list on Honor 8A.
If the headphones are new, sometimes you need to remove the protective film from the charging contacts before turning them on for the first time in order for them to be activated correct.
The search and connection process in the settings menu
After activating Bluetooth on the smartphone, the system will automatically begin scanning the airwaves in search of compatible devices. The screen will refresh and the "Available Devices" section will display the name of your headset, which usually corresponds to the brand or model, for example Sony or JBL.
Click on the name of the found device in the list to initiate the procedure pairing. In most cases, the connection is instantaneous without entering additional codes, but some older models may require a PIN code. The standard value for such cases is often the combination 0000 or 1234, which must be entered in the window that appears.
As soon as the connection is established, the device status will change to “Connected”, and a headset icon will appear in the top status bar. The sound of media files and system notifications will automatically switch to an external source, and you can check the quality of the transmission by launching any audio file.
☑️ Checking a successful connection
Setting profiles and sound quality
After the initial connection, it is useful to go into the advanced settings of a particular device to optimize its operation for your tasks. Click on the gear icon next to the name of the connected headphones in the Bluetooth menu to open the device card with additional options.
Here you can manage permissions for the use of various communication profiles, such as phone calls and media audio. Disabling unnecessary profiles can help in situations where the phone is trying to use the headset for other purposes, for example, sending navigation audio through the headphones when you want voice output through the speaker.
| Profile | Purpose | Recommendation |
|---|---|---|
| A2DP | Transfer high quality stereo sound | Always on |
| HFP/HSP | Speakerphone and microphone | On for calls |
| AVRCP | Playback control from buttons | Enabled for convenience |
| PBAP | Transfer phone book | Optional |
Pay attention to the “Call Sound” item or a similar switch in this menu. If you want to hear the ringtone only through the phone, and conduct a conversation through headphones, you need to correctly distribute these settings to avoid confusion in the operating modes audio channels.
Playback and call control
Most modern wireless headsets support a control protocol that allows you to control the player and receive calls directly from the buttons on the device body. On Honor 8A this function works stably, allowing you to pause music, switch tracks and adjust the volume without access to the smartphone screen.
To answer an incoming call, one short press on the multifunction button is usually enough, and to reject a call, a long press of the same key is enough. If you have a two-button headset, the logic may be different, so it is worth testing the combinations in a safe environment before important negotiations.
In some cases, the headphone microphone may not work correctly due to bandwidth limitations or power saving settings. If the interlocutor complains about a quiet voice, try to force a profile in the Bluetooth settings hands-free or reconnect the device.
⚠️ Attention: The button control interface depends on the headphone manufacturer, not on the phone, so combinations may differ from the standard ones.
Secret function of the hidden menu
In some versions of EMUI, through the engineering menu, you can change the Bluetooth codec from SBC to AAC for better quality, but this requires root access and can lead to unstable operation of the system.
Solving problems with connection and disconnections
Sometimes users are faced with a situation where the phone does not sees headphones or the connection is constantly disconnected at a distance of less than a meter. The first step in diagnosing such problems should be to completely clear the list of paired devices and try to connect again from scratch.
Go to the Bluetooth settings, find the problematic device in the “Paired devices” list and click on the gear icon or hold the name to select the “Unpair” or “Forget” option. After that, turn off Bluetooth on your phone, restart the device and try searching again.
- 🔄 Restart both devices at the same time to reset temporary network errors.
- 📶 Make sure there are no strong sources of interference nearby, such as microwave ovens or Wi-Fi routers.
- 🔋 Check the battery level of the headphones, as low voltage reduces the transmitter power.
If the problem persists, it may be a conflicting protocol version or outdated software. Check for system updates for your Honor 8A in the settings section, as company engineers often release patches that improve the stability of wireless modules.
Resetting network settings deletes all saved Wi-Fi passwords and Bluetooth pairs, so use this method only if other methods have not helped.
Resetting network settings and extreme measures
In cases where the software failure is profound and conventional methods do not help, you may need to reset the network settings. This operation will return Wi-Fi, mobile data and Bluetooth settings to factory defaults, clearing any accumulated configuration errors.
To perform this procedure, go to Menu System → Reset → Reset network settings. Confirm the action by entering your screen unlock PIN code, if you have one. After rebooting the phone, you will need to re-enter passwords for Wi-Fi networks and reconnect all wireless accessories.
This method effectively solves problems associated with the device discovery service freezing or incorrectly saving encryption keys. However, it is worth remembering that this is a radical measure, and should be resorted to only after exhausting all other diagnostic options.
⚠️ Attention: Resetting network settings does not delete your personal files, photos or applications, but deletes all connection settings.
Why does the phone take a long time to search for devices?
Sometimes background scanning processes may freeze due to lack of RAM, in which case closing unnecessary applications before connecting can speed up the process.
Frequently asked questions
Why does Honor 8A not see my new headphones?
Most likely, the headphones are not in pairing mode. Make sure the light is blinking and they are not connected to another device. Also check if your device is hidden in the phone's visibility settings.
Can you connect two pairs of headphones to one phone at the same time?
The standard version of Bluetooth on the Honor 8A does not support simultaneous transmission of stereo sound to two different pairs of headphones. You can connect a second device, but the sound will go only to one of them, or you will need to use special mixer applications.
How to improve the sound quality when connecting via Bluetooth?
In the settings for developers, you can try changing the bitrate or transmission codec, but on this model the choice is limited. It is best to use high-quality headphones that support the AAC codec, which is optimized for mobile devices.
What to do if there is sound, but the microphone does not work?
Check in the Bluetooth settings whether the “Incoming calls” profile is activated for this device. If the problem is not resolved, try removing the device and connecting it again, providing all requested permissions.