Modern Android-based smartphone it is impossible to imagine without constant access to the global network. For subscribers of the MegaFon operator, there are many ways to organize traffic consumption so as not to worry about its balance. The process of activating unlimited options may vary depending on your current tariff plan and device model.
In this article we will analyze in detail all the available methods for connecting to unlimited Internet, including using USSD commands, a mobile application and manually setting network parameters. You will learn how to properly configure APN access pointto ensure maximum connection stability and high data transfer speed.
It should be taken into account that the concept of “unlimited” may have its own technical features and limitations for different operators. For example, some options provide full access to social networks and instant messengers, while others provide access to the entire Internet with a subsequent reduction in speed after a certain package is exhausted. Understanding these nuances will help you choose the most suitable solution.
Activation of unlimited options via USSD commands
The fastest way to activate the desired service is to use special codes. You do not need Internet access to enter them; a cellular signal is sufficient. Dial in the dialer of your Android smartphone command *105*18# to call the main menu of Internet services.
After dialing the combination, a menu will appear on the screen in which you need to select the desired item, following the operator’s instructions. The system will automatically determine your current tariff and offer options available for connection. This is a universal method that works on any device, from budget models to flagships.
- 📞 To check the available options, dial
*105#and follow the menu instructions. - ⚡ Quick connection of frequently used packages is possible through short codes indicated on the operator’s website.
- 📉 Disabling unnecessary services is also done through USSD requests to avoid unnecessary charges.
⚠️ Attention: The cost of some options may depend on the region of your stay and the conditions of the basic tariff. Before confirming the connection, carefully read the SMS message describing the conditions.
The use of USSD codes is especially important when you urgently need to restore access to the network or activate a roaming service. However, if you prefer a visual interface, this method may seem less convenient due to the need to remember digital combinations.
Traffic management through the MegaFon application
The most convenient and informative tool for the subscriber is the official mobile application. It allows you not only to connect options in one click, but also to analyze traffic consumption in detail. For owners Android the application is available on Google Play and other stores.
In the application interface, all services are structured by categories. You can see how many gigabytes are left in your package and add additional gigabytes or connect to unlimited social networks. The interface is adapted for touch screens and is understandable even for inexperienced users.
☑️ Check before connecting
One of the key functions of the application is the ability to configure auto-renewal of options. This eliminates the need to manually activate the service every month. Also here you can track the connection status in real time and instantly respond to changes in tariffs.
- 📱 Intuitive interface with large buttons for managing services.
- 📊 Detailed statistics of expenses and traffic consumption by day.
- 🔔 Push notifications about the end package or connecting new options.
The application is regularly updated, receiving new features and improving stability. It is recommended to always use the latest version of the software in order to have access to all current tariffs and security fixes.
Use the application widget on the Android home screen for quick access to your balance and traffic balances without logging into the app.
Manually setting up an APN access point on Android
Sometimes automatic settings that come in SMS, may not work correctly or not arrive at all. In such cases, you must manually enter the parameters of the access point APN (Access Point Name). This is a critical step to ensure a stable 4G/LTE connection.
To enter the settings menu, go to Settings → Connections → Mobile networks → Access points (APN). The path may vary slightly depending on the version Android and shell manufacturer (MIUI, OneUI, ColorOS). If the list is empty or the settings are incorrect, create a new access point.
| Parameter | Value | Note |
|---|---|---|
| Name | MegaFon Internet | Any convenient name |
| APN | internet | Required lowercase |
| User name | gdata | Can be left blank |
| Password | gdata | Can be left blank |
| APN type | default,supl | No spaces |
After entering all the parameters, be sure to save the profile by clicking the menu (three dots) and selecting “Save”. Then activate the created point by placing a marker in front of it. Rebooting the phone after this procedure will help consolidate the changes in the system.
⚠️ Attention: Incorrectly specifying the protocol type (IPv4/IPv6) may make it impossible to connect to the 4G network. If the Internet does not work, try changing the protocol in the APN settings.
What to do if the internet does not work after setup?
If the Internet does not appear after manually setting the APN, try turning airplane mode on and off. Also make sure that the “4G/LTE Only” or “4G Preferred” mode is activated in the mobile network settings. In rare cases, a complete reset of the network settings is required.
Tariff plans with unlimited Internet
The most economical way to obtain unlimited access is to switch to the appropriate tariff plan. The MegaFon operator offers a range of tariffs where data packages are either very large or truly unlimited, subject to certain conditions.
When choosing a tariff, it is important to pay attention not only to the volume of traffic, but also to the availability of “Unlimited” options for specific applications. This allows you to use navigators, social networks and instant messengers without using up the main gigabyte package. For active users Android this is often a decisive factor.
- 🚀 Tariffs from the “Turn on” series offer flexible package settings.
- ♾️ The “Unlimited” option allows you to select applications for free access.
- 🔄 The ability to change the tariff is available at any time through the app.
The transition to a new tariff usually occurs at the beginning of the next billing period. Until then, the terms of your current plan will apply. This gives time to test new features and make sure you make the right choice.
Switching to a tariff with a large data package is often more profitable than constantly purchasing additional gigabytes on the old tariff.
Solving problems with Internet connection
Even with correctly configured parameters, failures in the operation of the mobile data may occur. Most often, the problem lies in a software conflict or temporary network failure. First of all, try rebooting the device - this solves 90% of connection problems.
If rebooting does not help, check whether the data service is activated in the Android notification shade. Sometimes a user accidentally turns off the mobile data, relying on Wi-Fi, which is not working at the moment. You should also make sure that there are funds in your account.
⚠️ Attention: If the 4G/LTE indicator disappears and “E” or “G” appears, it means that there is no fourth-generation signal in your coverage area. In this case, the speed will be low regardless of the phone settings.
In cases where the problem is systemic in nature, you may need to reset the network settings to factory settings. This action will delete saved Wi-Fi passwords and Bluetooth settings, but will return the network settings to their original state, which often helps with network registration errors.
How to reset network settings on Android?
Go to Settings → System → Reset settings → Reset Wi-Fi, mobile data and Bluetooth settings. Confirm the action. After the reboot, the phone will search for the network again.
Optimizing traffic consumption on Android
Even if you have unlimited Internet, it is important to control the background activity of applications. Some apps may consume traffic in the background, which can lead to an artificial slowdown of speed by the operator when fair use limits are exceeded.
In the settings Android you can limit the background mode for heavy applications. Go to Settings → Applications → Data usage and select the desired application. Here you can disable background data transfer, leaving access only when the app window is open.
- 📉 Disable auto-updating of applications via the mobile network in Google Play.
- 🎵 Set the quality of streaming video in YouTube and Netflix by by default.
- 📱 Use the “Traffic Saving” mode in the Android system settings.
Regular monitoring of data consumption will help identify “gluttonous” applications. Android system statistics show the exact time spent in the background and the amount of data transferred, which allows you to make a decision about removing or limiting unnecessary software.
Enable the “Traffic Saver” function in Android settings to prevent applications from using the Internet in the background when the screen is off.
Frequently asked questions (FAQ)
Why don’t I receive an SMS with Internet settings?
Request the settings again through your personal account or contact support. Also check whether the reception of service SMS is not blocked in the message settings of your smartphone.
Does Wi-Fi distribution affect unlimited Internet?
Yes, when distributing Internet (modem mode), traffic is consumed from the main package or charged separately, even if unlimited social networking is enabled for the phone itself.
How to check if the unlimited option is active?
Dial the USSD command *105*00# or check the list of active services in the MegaFon application. The subscription status and expiration date will be displayed there.
Is it possible to activate unlimited if the tariff is archived?
Not all options are available for archived tariffs. However, you can often connect “Unlimited” packages for social networks. It is better to check the exact list of available services in the application.
What to do if the Internet speed has dropped after connecting to unlimited?
You may have exhausted the high-speed traffic package, if it is provided for in the tariff. After this, the speed is reduced to the set value. Check your balances in the application.