The use of wireless headphones, especially popular clones AirPodshas become the norm for many users of smartphones based on Android. Despite the fact that these devices were originally developed for the Apple ecosystem, modern communication protocols Bluetooth make it easy to integrate them with any other gadgets.
The process of connecting replicas often raises questions for beginners, since the settings menu and the behavior of indicators may differ from the original. However, the basic algorithm of actions remains universal and understandable even without deep technical knowledge.
In this article we will analyze in detail all the stages of pairing, adjusting sound quality and solving typical problems faced by owners of non-original headsets.
Preparing headphones and smartphone for pairing
Before starting the procedure, make sure that your smartphone is in line of sight with the headphone case. The distance between devices should not exceed one meter to avoid interference during the first (handshake).
Check the charge level both on the phone itself and in the case. Low battery batteries This may cause the headphones to not enter search mode or turn off during the setup process.
Open the lid of the charging case without removing the headphones themselves. On many replica models, the indicator inside the case should start blinking white or orange, indicating that it is ready to connect.
⚠️ Attention: If the indicator is not blinking, the headphones may already be paired with another device. In this case, turn off Bluetooth on all gadgets that were previously used with this headset.
On your smartphone, go to the wireless connections settings. The path usually looks like this: Settings → Connections → Bluetooth. Make sure the switch is activated.
☑️ Ready to connect
Step-by-step guide for connecting
After activating Bluetooth on the smartphone, an automatic search for available devices will begin. This process may take from a few seconds to a minute depending on the version of the operating system.
In the list of available devices, find your model name. For non-original AirPods it often looks like i90000 TWS, AirPods Pro or just a set of characters. Click on the name to start pairing.
The system may ask you to confirm the action. Click Connect or OK. After successful connection, you will hear a characteristic sound signal in the headphones, and the status in the phone menu will change to “Connected”.
- 🎧 Make sure that the sound is played in the headphones and not in the phone speaker.
- 📱 Check the display of the charge level in the notification shade (not available on all models).
- ⚙️ Go to the Bluetooth settings and check the profiles: “Audio” and “Phone” should be active.
If the connection is successful, try playing a music track. The absence of sound may indicate the need to manually configure the profile in the advanced settings.
For better call quality in the Bluetooth settings, select the "HD Audio" or "SBC" profile if the AptX codec is not supported by the replica.
Features of the microphone and control
One of the main problems when using clones on Android is the incorrect operation of the microphone. Often, the system defaults to using the smartphone's microphone rather than the built-in earphone.
To fix this, during a call, tap on the audio source selection icon on the call screen and switch to Bluetooth headset. In some cases, it is necessary to force this parameter in the developer settings.
Touch control on replicas may be unstable. Gestures for answering a call, switching tracks or calling an assistant are often hard-coded and cannot be configured through the standard Android menu.
⚠️ Attention: On some models, double-tapping activates Siri, which does not work on Android. Try reassigning actions through third-party applications, if such a function is supported.
The quality of voice transmission greatly depends on the distance to the phone. When removed by more than 5-7 meters, the microphone may begin to work intermittently or transmit only noise.
Setting the sound and equalizer
Standard Android sound settings may not fully reveal the potential of budget drivers installed in non-original headphones. To improve the sound, it is recommended to use the built-in equalizer.
Go to section Settings → Sound and vibration → Equalizer. Here you can select preset profiles or adjust frequencies manually. For cues, the “Rock” or “Pop” profile is often well suited, enhancing mid-range frequencies.
| Parameter | Recommended value | Impact on sound |
|---|---|---|
| Bass frequencies (60 Hz) | +3 dB | Bass boost |
| Mid frequencies (1 kHz) | 0 dB | Clarity vocals |
| High frequencies (14 kHz) | +2 dB | Sound detail |
| Preamplification | -1 dB | Protection from wheezing |
Do not overincrease the bass level, as cheap speakers can begin to wheeze at maximum volume. It is better to achieve a balance in which the voice sounds clear.
The secret of improving sound
Enable the "Absolute volume" function in the menu for developers to synchronize the volume levels of the phone and headphones.
Solving problems with connection and desynchronization
A common problem with cheap TWS headphones cause channel desynchronization when the sound plays in only one ear. This occurs due to loss of communication between the left and right modules.
To solve the problem, perform a full reset of the headphones. This is usually done by holding the touch zones on both headphones for a long time (about 10-15 seconds) until the indicators blink several times in a row.
After the reset, remove the device from the list of paired ones in the phone's Bluetooth settings (Forget it device) and perform the connection procedure again, as described in the first section.
- 🔄 Reboot your smartphone before reconnecting.
- 🧹 Clean the charging contacts in the case from dust and oxidation.
- 🔋 Charge both headphones to 100% before resetting.
If the problem persists, there may be a hardware defect in one of the modules. In this case, software solutions are unlikely to help.
Desynchronization of channels in 90% of cases is treated by completely resetting the headphones and re-pairing.
Applications for monitoring and management
Since the standard Android menu does not show detailed information about clone headphones, users often resort to using third-party software. There are special utilities that emulate the iOS interface.
Applications like MaterialPods or Capsule allow you to display the animation of opening the case and the exact percentage of charge of each earphone. They work on top of the standard system interface.
To install such apps, download the APK file from a reliable source or find the application on Google Play. After installation, grant the necessary permissions to access Bluetooth and display on top of other windows.
⚠️ Warning: Be careful when granting permissions to third-party applications. Some utilities may request excessive access to contacts or the file system without real need.
Using such widgets not only improves the visual experience, but also helps you notice when one of the headphones is running low, which prevents them from desyncing in the future.
Frequently asked questions (FAQ)
Why doesn’t the microphone work when calling through instant messengers?
Many instant messengers (WhatsApp, Telegram, Viber) use the phone’s microphone by default to ensure better recording quality. To change this, go to the settings of a specific application and find the “Sound” or “Calls” section, where you can force the selection of a Bluetooth headset.
Is it possible to update the firmware of non-original AirPods?
No, there are no official firmware updates for replicas. The chips installed in them do not support OTA updates through Apple services or third-party utilities. Any offers to “update the firmware” in suspicious applications may be a scam.
How to disable voice notifications in Chinese?
Voice prompts (“Connected”, “Power On”) are hardwired into the memory of the headphone controller and cannot be disabled by software. The only way to get rid of them is to physically resolder the chip or use plugs, which is impractical. It is recommended to simply get used to them or lower the volume of system sounds.
Why do headphones discharge quickly?
Budget models use low-capacity batteries (often less than 40 mAh for each headphone). In addition, over time, the capacity degrades. You can extend the operating time by disabling unused functions, such as constant search for a device or extra light indicators, if the model allows it.