Modern TVs Xiaomi Mi TV have turned into powerful multimedia centers, which are often more convenient to control from a familiar smartphone. Integrating your mobile device and TV opens up a huge range of possibilities, from simply streaming movies and photos to using your phone as a game controller or universal remote control. Users are often faced with the need to display an image on a large screen, but do not know how to properly set up the connection between gadgets. There are several proven ways to implement this task, each of which has its own characteristics and scope.
The pairing process depends on your operating system - Android or iOS, as well as on the specific tasks that you plan to perform. Wireless technologies, such as Miracast i Chromecast, allow you to transfer content without unnecessary wires, while maintaining mobility. However, to achieve maximum stability and minimum signal delay, it is sometimes advisable to use a wired connection. In this guide, we will analyze in detail all the current methods of synchronizing your phone with the ecosystem Android TV from Xiaomi, paying attention to the nuances of setup and possible problems.
Preparing devices and checking the network
Before starting any setup, it is critical to ensure that both devices are under the same network conditions. For most wireless broadcast protocols to work, your smartphone and TV Xiaomi must be connected to the same Wi-Fi networks. If your router supports dual-band mode (2.4 GHz and 5 GHz), it is highly recommended to use the 5 GHz band for transmitting video content, as it provides higher throughput.
Make sure that the external device detection function is enabled on your TV. In system settings Android TV this option is usually active by default, but after major firmware updates, privacy settings may be reset. Make sure that modules Bluetooth and Wi-Fiare enabled on both gadgets, even if you plan to use them only for the initial handshake.
⚠️ Attention: If your router is configured for client isolation (AP Isolation), devices on the same network will not see each other. This function must be disabled in the router settings for successful pairing.
☑️ Preparing for connection
It is also worth checking the version of the operating system on the TV. Outdated software may not support new video encoding standards or security protocols used by modern smartphones. Go to menu Settings → About TV → System update and search for new versions. Fresh network module drivers often solve problems with an unstable connection.
Screen broadcast via the built-in Cast function
The simplest and most common way to duplicate an image is to use the built-in technology Google Cast. This function is integrated directly into the shell Android TV, so there is no need to install additional software on the TV. On Android smartphones, this option is called "Cast", "Smart View" (on Samsung) or "Screen Sharing", depending on the model and firmware version.
To activate the process, pull down the notification shade on your phone and look for an icon that resembles a screen with a Wi-Fi icon in the corner. Clicking on this icon will start scanning available devices on the local network. Your TV should appear in the list Xiaomi. After selecting the device, a connection confirmation request will appear on the TV screen, which must be accepted using the remote control.
- 📱 Open the quick settings panel on your smartphone.
- 📡 Press the "Broadcast" or "Smart View" button.
- 📺 Select your Xiaomi TV from the list of found devices.
- ✅ Confirm the connection on the TV screen with the remote control.
After a successful connection, the image from the phone screen will be completely duplicated on the TV. Please note that in this mode, the phone continues to work normally and all notifications will be visible on the big screen. To stop the broadcast, just click on the icon in the notification shade again or turn off the smartphone screen, although in some models turning off the phone display may interrupt the signal transmission.
To save smartphone battery power during a long video broadcast, it is recommended to reduce the brightness of the phone screen to a minimum, since the image is still displayed on the TV.
Using the Google Home application for broadcasting
If the standard "Broadcast" function does not find the TV or is unstable, the best solution is to use the official application Google Home. This is a universal tool for managing the smart home ecosystem, which also takes on the functions of a media server. The application is available for download in Google Play Market and the App Store, ensuring compatibility with most modern smartphones.
After installation and authorization in the application through your Google account, the app will automatically scan the network and find connected Chromecast or Android TV devices. In the application interface, your TV Xiaomi will be displayed as a card. By clicking on it, you will see the "Broadcast screen" button, which forcibly initiates mirroring.
| Function | Standard broadcast | Google Home | Third-party applications |
|---|---|---|---|
| Connection stability | Average | High | Depends on the application |
| Latency | Low | Minimum | High |
| iOS support | Limited | Full | Partial |
| Volume control | Depends on models | Full | Partial |
One of the advantages of using Google Home is the ability to broadcast not the entire screen, but specific content from supported applications. For example, you can play a YouTube video on your phone, tap the Cast button inside the app, and select your TV. In this case, the phone acts only as a remote control, and the video stream is downloaded by the TV directly from the Internet, which significantly reduces the load on the smartphone’s battery and improves picture quality.
What to do if Google Home does not see the TV?
Make sure that the same Google accounts are used on the phone and TV. Sometimes rebooting the router and clearing the Google Home application cache in the smartphone settings helps.
Connecting iPhone and iPad to Xiaomi TV
Owners of Apple devices often wonder how to connect their gadgets to Android TVs, since native technology AirPlay is not supported by the Android system out of the box. However, Xiaomi has introduced support for the AirPlay 2 protocol in its latest TV models, which allows iPhone and iPad owners to stream content without installing additional software on the TV.
To check this feature, go to the TV settings and find the section related to AirPlay. If your model supports this feature, you will see it in the list of available options. On an iPhone, you need to open Control Center (swipe down from the upper right corner on new models or swipe up on older models) and click on the Screen Mirroring icon. In the list of devices, select your Xiaomi TV.
⚠️ Attention: On some Xiaomi models, the AirPlay function may be disabled by default or require you to enter a PIN code that is displayed on the TV screen when you try to connect.
If your TV model does not support AirPlay in hardware or software, the solution is to install a third-party receiver application from the store. Google Play on the TV itself. Popular apps like AirScreen or Receiver for AirPlayemulate the Apple protocol, allowing the iPhone to see the TV as a native Apple TV device. After installing such an application, follow the on-screen instructions to complete the setup.
Wired connection via USB and HDMI
Although wireless technologies are convenient, they do not always guarantee stable signal transmission, especially in busy broadcast conditions or when it is necessary to display images in high resolution 4K with a high frame rate. A wired connection remains the most reliable method, eliminating latency and compression artifacts. To implement this method, you will need an appropriate adapter for your smartphone.
For modern smartphones with a port USB Type-C you must use an adapter USB-C to HDMI. It is important to make sure that your phone supports the MHL or DisplayPort Alt Modestandard, since not all budget models can transmit a video signal through the charging port. Connect the adapter to the phone, and then connect it with an HDMI cable to the corresponding port on the Xiaomi TV.
Sequence of actions:1. Connect the USB-C adapter to the smartphone.
2. Insert the HDMI cable into the adapter and into the TV port.
3. Switch the signal source to TV (Input button).
4. Select the appropriate HDMI port in the menu.
After the physical connection, the TV will automatically detect the new signal source. You will need to switch the input source (Input) on the TV remote control to the appropriate port HDMI. The image will appear instantly and the phone will enter mirror mode. Some Xiaomi models, with a wired connection, also allow you to charge your smartphone via the same adapter if it is equipped with an additional power port.
Troubleshooting and common errors
Even if you follow all the instructions, users may encounter connection problems. The most common error is when the phone sees the Wi-Fi network, but does not find the TV in the list of devices for broadcasting. This is often due to the fact that the devices are connected to different frequency ranges of the router, which are isolated from each other by security settings.
Another common problem is desynchronization of sound and image. This is typical for wireless transmission methods when the Wi-Fi signal is weak. To solve the problem, try moving the router closer to the TV or switching to the 5 GHzband, if available. It’s also worth checking whether there are any background downloads running on your phone, which can clog the communication channel.
- 🔄 Reboot both the router and the TV - this solves 80% of detection problems.
- 🛡️ Check your firewall settings router, they should not block local traffic.
- 📶 Make sure that the Wi-Fi signal at the place where the TV is installed is stable and strong.
⚠️ Attention: The menu interface and item names may vary slightly depending on the MIUI for TV firmware version. If you do not find the described function, use the search in the TV settings.
The stability of the wireless connection directly depends on the quality of your router and the absence of physical obstacles between it and the TV.
Frequently asked questions (FAQ)
Is it possible to control a Xiaomi TV from a phone like remote control?
Yes, it is possible. The official application Android TV Remote Control from Google or a proprietary application MI Remote allows you to use your smartphone as a full-fledged remote control with support for voice input and touch panel.
Why is the quality worse when broadcasting videos from YouTube than when running on TV?
When duplicating the screen (Screen Mirroring) the phone encodes the video stream and sends it to the TV, which reduces the quality. Use the Cast button inside the YouTube application to have the TV download videos directly from the network in maximum quality.
Does Xiaomi support transmitting audio to wireless headphones connected to the phone?
When using mirroring mode, the sound is usually duplicated to the TV. However, some applications allow you to select the audio output device separately. To listen to sound only through headphones, it is better to use the “Audio Only” mode in the Bluetooth settings of the TV if it supports connecting headphones directly.
How to disable the display of phone notifications on the TV screen?
In full screen broadcast mode, it is difficult to hide notifications using system tools. It is recommended to turn on Do Not Disturb mode on your smartphone before watching a movie or presentation to prevent pop-up messages from overpowering the content.