Modern smartphones have long ceased to be just means of communication, having turned into universal control centers for digital life. The model Honor 8X, despite its age, remains a popular device due to its balanced characteristics and convenient EMUI shell. Situations often arise when a tablet, laptop or second phone urgently needs to connect to a global network, but the usual Wi-Fi is not nearby.
It is at such moments that the modem function built into the operating system comes to the rescue. Android. You can turn your smartphone into a full-fledged router in a matter of seconds, without requiring special knowledge or third-party software. In this material, we will analyze in detail all available methods of transmitting traffic, the nuances of security settings and possible problems that you may encounter during operation.
Understanding the principles of operation of an access point will allow you not only to quickly provide network access to friends, but also to correctly configure settings to avoid unnecessary costs or overheating of the device. Let's take a closer look at how to activate this function on your gadget as efficiently as possible.
Preparing the device and checking the tariff
Before you start actively broadcasting the signal, you need to make sure that the device itself is ready and complies with the conditions of your mobile operator. Internet distribution, especially in Wi-Fi hotspot, creates an increased load on the processor and radio module of the smartphone. Make sure you have enough battery power or connect your device to a power source, as the process can quickly drain power.
A critical step is to check your data plan. Many cellular operators impose restrictions on the use of the Internet in modem mode or require the connection of additional options. Ignoring this item may result in access being blocked or funds being charged at inflated rates.
⚠️ Attention: Some tariffs automatically determine the distribution of traffic based on packet headers (TTL). If your operator blocks the distribution, standard phone settings will not solve the problem without changing the system parameters.
It is also worth checking the quality of signal reception in the current location. For stable operation of clients connecting to your Honor 8X, a stable connection to a cell tower is required. If the network indicator shows a low level or constantly switches between 3G and 4G standards, the speed of connected devices will be unsatisfactory.
Activating a Wi-Fi hotspot on Honor 8X
The most popular and universal way to share the Internet is to create a wireless Wi-Fi network. This method allows you to connect multiple devices at once, including laptops, tablets and other smartphones, regardless of their operating system. The EMUI shell interface on Honor 8X is intuitive, which greatly simplifies the setup process.
First, you need to go to the main settings menu. Find the section responsible for wireless connections. Depending on the firmware version, it may be called “Wireless Networks” or simply appear in the top list of main parameters. Here we are interested in the item related to the personal access point.
☑️ Check before turning on
After entering the access point menu, you will see a status switch. Activate it by moving it to the “On” position. Immediately after this, the smartphone will begin broadcasting a network with a default name, which usually contains the device model. However, using standard settings is not recommended for security reasons.
Be sure to go to the access point settings to change the network name (SSID) and set a strong password. Using an encryption type WPA2 PSK is a prerequisite to protect your channel from unauthorized access by unauthorized persons. A weak password or its absence can lead to unknown users using your traffic.
Use complex passwords consisting of letters and numbers to prevent neighboring devices from guessing the access key.
In the same menu you can configure the frequency range. Honor 8X supports operation in the 2.4 GHz band, which provides better signal penetration through walls, although at a lower speed compared to 5 GHz. For most use cases, the standard range is the optimal choice.
Configuring security settings and network name
The security of your personal network directly depends on the correctness of the entered parameters. When you set up a hotspot, you're essentially creating a mini-LAN controlled by your phone. Insufficient protection can lead not only to traffic theft, but also to interception of transmitted data if it is not encrypted at the application level.
In the access point configuration menu, pay attention to the “Network name” field. Change the standard name to a unique one to easily identify your device in the list of available connections on other gadgets. This is especially true in crowded places where many devices create their networks with similar names.
| Parameter | Recommended value | Description |
|---|---|---|
| SSID (Network name) | Unique name | Allows you to easily find your network among others |
| Protection type | WPA2 PSK | Encryption standard that ensures security |
| Password | Minimum 8 characters | Access key for connecting clients |
| Range | 2.4 GHz | Ensures compatibility with older devices |
Setting a password is a critical step. The system will require you to enter a combination of characters at least 8 characters long. It is recommended to use a combination of uppercase and lowercase letters and numbers. Avoid using obvious combinations like “12345678” or date of birth.
Also in the advanced settings you can see the option “Show connected devices”. This feature allows you to monitor in real time exactly who is using your Internet. If you notice an unfamiliar user, you can immediately change the password or block access to a specific MAC address.
Alternative methods of transmitting the Internet
Although Wi-Fi is the most convenient method, there are other connection options that can be useful in specific situations. For example, if you need to save the battery power of the receiving device as much as possible or if it does not have drivers for Wi-Fi.
The first alternative method is Bluetooth modem. The data transfer speed here is much lower than over Wi-Fi, but power consumption is also significantly less. This option is ideal for transferring a small amount of information or for maintaining a constant but low-speed connection.
To activate the Bluetooth modem, you must first pair two devices. Go to Bluetooth settings on both phones, find each other and confirm the connection. After successful pairing on the distribution device (Honor 8X) you need to activate the "Bluetooth modem" switch in the access point settings.
⚠️ Attention: The connection speed via Bluetooth is limited by the data transfer protocol and rarely exceeds 1-2 Mbit/s, which is not enough to watch video in high quality.
The second option is to use a USB cable. This method provides the most stable connection and high speed, comparable to a wired Ethernet connection. In addition, during operation, the smartphone will be charged from the device to which it is connected, which solves the problem of rapid discharge.
To operate the USB modem, connect the phone to a computer or other OTG-enabled device using a cable. In the access point settings, activate the “USB modem” item. The system will automatically detect the connection and configure the network interface.
Why is a USB modem better for a laptop?
Connecting via cable eliminates radio interference, provides maximum speed and allows you to simultaneously charge your phone from a powerful laptop battery, leveling out energy consumption for distribution.
Solving common problems connections
Despite the ease of setup, users sometimes encounter situations where devices do not see the network or cannot access the Internet. One of the common causes is an IP address conflict or a failure in the operating system network services Android.
If the client device connects to the network, but the Wi-Fi icon hangs without Internet access, try rebooting the access point. Turn the toggle switch off and on again in settings. In more complex cases, you may need to completely restart the smartphone itself Honor 8X.
Another common problem is limiting the number of connected users. By default, the system can only allow a certain number of clients to connect (usually up to 8). If the limit is reached, new devices will not be able to enter the network, even if they enter the correct password.
Check your traffic limit settings. In the access point menu there is a function for setting a data volume limit. If you previously set such a restriction and the limit was exhausted, Internet distribution will automatically stop until the counter is reset or the restriction is cancelled.
Rebooting the network settings or the device itself often solves 90% of problems with the incorrect operation of the access point without the need for deep intervention in the system.
The impact of distribution on autonomy and heating
Modem mode is one of the most resource-intensive processes for a smartphone. Active operation of the wireless module in signal broadcast mode leads to a significant increase in the temperature of the device body. This is a normal physical reaction, but it requires control by the user.
During a long distribution session, especially if several active clients are connected to the network downloading heavy content, the processor and modem work to the limit of their capabilities. This can lead to throttling - a forced decrease in performance to cool components.
To minimize the negative consequences, try not to cover the phone during distribution and avoid direct sunlight. If you are planning a long session, it is recommended to remove the protective cover to improve heat dissipation.
Rapid battery drain is an inevitable companion to this mode. Even with the screen off, power consumption remains high. Always keep a charger or external battery (Power Bank) on hand if you plan to use your phone as a router for a long time.
How to extend the life of the battery during distribution?
Turn on the energy saving mode on the phone itself, reduce the screen brightness to a minimum or turn off the display completely, and also close background applications that are not involved in the process distributions.
Frequently asked questions (FAQ)
Why don’t other phones see my Wi-Fi network?
Make sure that the access point is turned on and the phone is not in sleep mode with the Wi-Fi module disabled. Check if the network name (SSID) is hidden in your privacy settings. It is also possible that the device is too far away or there are serious obstacles between it and the phone.
Is it possible to distribute the Internet if the phone does not have a SIM card?
No, to distribute mobile data you need an active SIM card with a tariff that supports data transfer. However, you can rebroadcast the Wi-Fi signal if your phone is connected to another wireless network using special applications or repeater functions if they are supported by the firmware.
How many devices can be connected to the Honor 8X at the same time?
Technically, the EMUI shell allows you to connect up to 8 devices at the same time. However, the actual number depends on the processor load and channel bandwidth. When connecting more than 3-4 active users, the speed on each device may drop significantly.
Does Internet distribution affect the speed of the mobile connection on the phone itself?
Yes, it does. The communication channel is divided between all connected clients. If one device begins to actively download files, the speed on other devices, including the smartphone-distributor itself, will decrease in proportion to the channel load.
Is it safe to use public access point settings?
It is strictly not recommended. Using an open network without a password allows anyone nearby to connect to your internet and potentially intercept unencrypted traffic. Always set a strong password with WPA2 encryption.