Distributing the Internet from Xiaomi Redmi 7A to another smartphone is a task that users face in a variety of situations: from the lack of Wi-Fi in a cafe to the need to urgently connect the tablet to the network. Despite its apparent simplicity, the process can cause difficulties due to firmware features, operator limitations, or hardware nuances of a budget device. In this article, we will analyze all possible methods of distributing the Internet - from a standard access point to alternative methods via MIUI, operator limitations or hardware nuances of a budget device. In this article we will analyze all possible ways to distribute the Internet - from a standard access point to alternative methods via Bluetooth and USB, and also consider typical errors and their solutions.

Model Redmi 7A, released in 2019, still remains popular due to its price ratio and functionality. However, its processor Qualcomm Snapdragon 439 and 2 GB of RAM impose certain restrictions on the operation of the Internet distribution module. For example, when actively using an access point, stuttering may occur if resource-intensive applications are running on the device at the same time. We will take these features into account and give recommendations for optimization.

Before you start setting up, make sure that:

  • 📶 mobile data is activated (the SIM card supports data transfer). Redmi 7A mobile data is activated (SIM card supports data transfer).
  • 🔋 The battery charge level is not lower than 30% - Internet distribution actively consumes energy.
  • 📱 The second phone has the power saving mode disabled, which can block connections to access points.

1. Internet distribution via Wi-Fi (access point)

The most common and convenient way is to create Wi-Fi hotspot. It allows you to connect not only another phone to the Internet, but also a laptop, tablet or even a smart watch. On Redmi 7A this function works stably, but may require additional settings if the operator blocks the distribution.

To activate the access point:

  1. Open the menu Settings (gear icon on the main screen).
  2. Go to section Network and Internet → Access point and modem.
  3. Select Wi-Fi access point.
  4. Activate the slider at the top of the screen.
  5. If necessary, change the network name (Access point name) and password (Protection it is recommended to leave WPA2-PSK).

After switching on, a notification about the active access point will appear on the screen. Now on the second phone you can connect to the created network by entering the set password. Please note: if the connection does not occur, check whether your tariff plan is blocking the Internet distribution (we will talk about this below).

mobile data is enabled on Redmi 7A|

The access point is activated and visible in the list of networks|

The password is entered correctly (case is important)|

VPN or proxy is disabled on the second phone

-->

2. Alternative distribution methods: Bluetooth and USB

If Wi-Fi is via Wi-Fi. is unavailable for some reason (for example, the module is broken or the operator is blocking distribution), you can use Bluetooth or USB cable. These methods are less convenient, but sometimes they become the only way out.

Distribution via Bluetooth:

  • 🔵 Turn on Bluetooth on both phones.
  • 📲 On Redmi 7A go in Settings → Network and Internet → Access point and modem → Bluetooth modem.
  • 🔍 Select the device from the list and confirm pairing.
  • 🌐 On the second phone in the Bluetooth settings, activate the option Use to access the Internet.

The data transfer speed via Bluetooth will be lower than via Wi-Fi, but this method uses battery power more economically. It is also useful if you need to distribute the Internet to a device without Wi-Fi support (for example, to some smartwatch models).

Distribution via USB:

  • 🔌 Connect Redmi 7A to a second phone using an OTG cable (an adapter is required USB-C → USB-C or Micro-USB → USB-C, depending on the device ports).
  • ⚙️ On Redmi 7A go to Settings → Network and Internet → Access point and modem → USB modem.
  • 🔄 On the second phone, in the connection settings, select the mode USB data transfer.

USB distribution is the most stable method, but it requires a physical connection and a compatible cable. The data transfer speed will be higher than via Bluetooth, but lower than via Wi-Fi (due to protocol limitations USB 2.0 on Redmi 7A).

Wi-Fi (access point)|

Bluetooth|

USB cable|

Never distributed

-->

3. Why Internet distribution does not work: typical errors

Even with proper configuration, the access point on Redmi 7A may not work. Let's look at the most common reasons and ways to eliminate them.

Problem Possible reason Solution
The access point turns on, but the Internet does not work The operator blocks the distribution (often for unlimited tariffs) Call operator support or change tariff
Device connects, but the page does not open Incorrect APN settings Check APN in Settings → SIM cards and mobile networks → Access points (APN)
The access point constantly turns off Power saving mode disables the Wi-Fi module Disable battery optimization for the application Settings
Low upload speed Weak mobile network signal or channel congestion Switch to a 4G network or change the Wi-Fi band to 5 GHz (if supported)

If the problem is not solved, try resetting the network settings: go to Settings → System → Reset settings → Reset Wi-Fi, mobile network and Bluetooth settings. On Xiaomi Redmi 7A, after resetting, you may need to re-activate the SIM card (enter the PUK code when prompted).

What to do if the operator blocks the distribution?

Some operators (for example, Tele2 or Yota) limit the distribution of Internet on unlimited tariffs. You can bypass the blocking in the following ways:

1. Use VPN on the device that connects to the access point.

2. Change the tariff to one where distribution is allowed (usually these are tariffs marked “For modem”).

3. Manually change TTL in the engineering menu (requires root access and may disrupt network stability).

4. Distribution optimization: how to increase speed and stability

Internet distribution speed Redmi 7A depends on several factors: the quality of the mobile network signal, channel congestion and the settings of the device itself. Here are some tips to improve performance:

  • 📶 Select the optimal Wi-Fi band: If your Redmi 7A supports dual-band (2.4 GHz and 5 GHz), try switching to 5 GHz - there is less interference, but a smaller coverage area.
  • 🔄 Disable background applications: Close all apps that consume traffic (for example, cloud services or instant messengers with auto-updates).
  • 🔋 Connect charging: When the charge level is below 20%, the system can automatically reduce the performance of the Wi-Fi module.
  • 🛠️ Update the firmware: New versions MIUI often correct errors related to Internet distribution.

If you distribute the Internet to several devices at the same time, the speed on each of them will be lower. The optimal number of connected gadgets for Redmi 7A is 2-3. With a larger number, lags and connection breaks are possible.

💡

If the distribution speed is critically low, try manually setting the APN. To do this, go to Settings → SIM cards and mobile networks → Access points (APN) and create a new profile with the parameters of your operator (they can be found on the official website).

5. Security when sharing the Internet: how to protect your data

When you activate an access point, your Redmi 7A becomes vulnerable to potential attacks, especially if you are in a public place. Here are the key precautions:

  • 🔒 Use a complex password: Avoid simple combinations like 12345678 or qwerty. The optimal password is at least 10 characters with numbers and letters.
  • 👥 Limit the number of connected devices: In the access point settings (Max. number of connected devices) set a limit (for example, 2-3).
  • 🛡️ Disable distribution when it is not needed: A long-term active access point increases the risk of unauthorized connection.
  • 🔄 Change your password periodically: If you often distribute the Internet in public places, update the password once every 1-2 weeks.

It is also worth disabling the function WPS (if it is available in the settings), as it has vulnerabilities that allow you to connect to your network without a password. On Redmi 7A this option is usually hidden, but it can be activated through the engineering menu (not recommended unless absolutely necessary).

💡

Never distribute the Internet through an open network (without a password), even if you “urgently need to connect a friend.” This allows attackers to intercept your traffic or use your device for illegal activities.

6. Distributing the Internet without root access: bypassing operator restrictions

Many operators block the distribution of the Internet on unlimited tariffs, citing this as preventing network overload. However, there are legal ways to bypass this limitation without rooting (which may void your warranty).

Method 1: Using a VPN

Install a VPN application (for example ProtonVPN or Windscribe) on the device that connects to the access point. This will allow you to bypass blocking at the operator level, since the traffic will go through the VPN server. The disadvantage of the method is a possible decrease in speed due to encryption.

Method 2: Changing TTL

Some operators determine distribution by value TTL (packet lifetime). To change it:

  1. Install the application Termux from Google Play.
  2. Enter the command: 
    su

    echo "net.ipv4.ip_default_ttl=65" > /proc/sys/net/ipv4/ip_default_ttl

    (required root, but on some firmware it works without it).

  3. Reboot the phone.

This method does not guarantee 100% results, since operators are constantly updating blocking methods. A more reliable option is to change the tariff to one where distribution is officially permitted.

⚠️ Attention: Changing system parameters (for example, TTL) can lead to unstable network operation or even blocking of the SIM card by the operator. Before experiments, make sure that you have a backup copy of your data.

7. Frequently asked questions and answers

Is it possible to share the Internet from Redmi 7A to an iPhone?

Yes, but there may be connection problems due to its features. iOS. On an iPhone, when connecting to an access point Redmi 7A sometimes the “Invalid password” error appears, although it was entered correctly. In this case:

  1. On Redmi 7A change the security type from WPA2-PSK to WPA-PSK.
  2. Reboot both devices.
  3. On the iPhone, forget the network and connect again.
Why does the access point on Redmi 7A turn off after 5-10 minutes?

This is due to the operation of the power saving mode. To fix:

  1. Go to Settings → Battery and performance → Battery optimization.
  2. Find the application Settings and select No restrictions.
  3. Disable the function Automatically turn off Wi-Fi in the access point settings.
How to distribute the Internet from Redmi 7A to a laptop?

The process is no different from distribution to another phone:

  1. Activate the access point on Redmi 7A (as described in the first section).
  2. On the laptop, find the created network in the list of available Wi-Fi and connect.
  3. If the Internet does not work, check the Windows firewall settings (sometimes it blocks new connections).

For stable operation, it is recommended to connect Redmi 7A to a charger, since distributing to a laptop consumes more energy.

Is it possible to distribute the Internet from Redmi 7A if does it not have a SIM card?

No, to distribute mobile data, you must have an active SIM card with a connected data package. However, you can distribute Wi-Fito which you are connected yourself Redmi 7A (for example, if the phone is connected to a router). To do this:

  1. Connect Redmi 7A to Wi-Fi.
  2. Activate the access point in the settings.
  3. Connect the second phone to the access point Redmi 7A (in fact, this will be “proxying” Wi-Fi).

The speed in this case will be lower due to double signal conversion.

How to reset the network settings on Redmi 7A if the access point does not work?

If none of the methods helped, perform a reset:

  1. Go in Settings → System → Reset settings.
  2. Select Reset Wi-Fi, mobile network and Bluetooth settings.
  3. Confirm the action and restart the phone.

After the reset, you will need to reconfigure your connection to the mobile network (enter the APN if the operator does not provide it automatically).

If you encounter a problem not described in the article, check that your firmware is up to date Redmi 7A or contact support Xiaomi. In some cases, problems with Internet distribution may be associated with hardware malfunctions (for example, damage to the antenna module).

⚠️ Attention: Menu settings and available functions may differ depending on the version MIUI and regional firmware. If your screen does not match that described in the instructions, update the system or check for additional items in the advanced settings.