Distributing mobile data from one smartphone Honor to another is a task faced by millions of users. Whether it’s a trip out of town, lack of home Wi-Fi, or the need to urgently connect a second phone to the network, the ability to correctly configure an access point saves you in critical situations. However, many owners of devices Honor (especially models of the series X, Magic or Play) encounter problems: the access point does not turn on, the connection is constantly interrupted, or the data transfer speed leaves much to be desired.

In this article we will sort all possible methods of Internet distribution between the two phones Honor (or other Android devices), including hidden settings that the manufacturer does not advertise. You will learn how to bypass operator restrictions, why some Honor models block Internet distribution when connected to certain 5G networks, and how to increase connection stability by 2-3 times. We will also analyze which distribution method (Wi-Fi, Bluetooth or USB) is the most energy efficient for your specific model.

Before proceeding to the instructions, make sure that:

  • 📶 On the main phone (which will distribute the Internet) mobile traffic (not only Wi-Fi).
  • 🔋 The battery level of both devices exceeds 30% - Internet distribution significantly increases energy consumption.
  • 📱 On the second phone, traffic saving functions are disabled (for example, Adaptive communication or Background limiting).
📊 Which method of Internet distribution do you use more often?
Wi-Fi access point
Bluetooth
USB cable
Never distributed

1. Internet distribution via Wi-Fi (access point)

The most popular and universal method is creation Wi-Fi network on the main phone, to which the second smartphone is connected. On devices Honor this function is called Access point or Modem and access point (depending on the version Magic UI or EMUI).

To activate the access point:

  1. Open Settings → Mobile network → Access access.
  2. Tap on the slider Wi-Fi access point (on some models - Portable access point).
  3. Set up the network name (SSID name) and password (recommended to use WPA2-PSK for security).
  4. On the second phone, find the created network in the list of available Wi-Fi and connect.

If the access point does not turn on or turns off immediately, check:

  • 🔄 Reboot the phone — sometimes it helps to reset network settings.
  • 📴 Operator restrictions —some tariffs block Internet distribution (more on this below).
  • 🔧 Mode flight —its accidental activation disables all wireless modules.

mobile data is enabled on the main phone|

VPN is disabled on the second phone|

The network name (SSID) does not contain Cyrillic or emoji|

The password consists of 8+ characters (Latin + numbers)-->

On models Honor 90, Magic 5 Pro and newer there is a hidden option Max. number of connected devices (default - 5). If you distribute the Internet to several gadgets at the same time, increase this value to 8–10 in the access point settings.

💡

If the Internet speed through the access point is low, try manually selecting the Wi-Fi band: go to Access point settings → Frequency range and install 5 GHz (if the second phone supports it).

2. Distribution via Bluetooth (economy mode)

If Wi-Fi drains the battery too quickly, an alternative is Bluetooth modem. This method is slower (up to 3 Mbit/s versus 50+ Mbit/s for Wi-Fi), but consumes energy 2–3 times more economically. Ideal for sending messages or leisurely surfing.

How to set up:

  1. On the main phone: Settings → Connections → Bluetooth → turn on Bluetooth and make a device Visible.
  2. On the second phone: connect to the first device via Bluetooth (enter the verification code if required).
  3. On the main phone: return to Settings → Mobile network → Access point and turn on Bluetooth modem.
  4. On the second phone: in the Bluetooth settings, tap on the connected device and select Connect to the Internet.

Method limitations:

  • ⚡ Speed limited version of Bluetooth (on Honor 80 and newer - up to 2 Mbit/s, on older models - up to 1 Mbit/s).
  • 🔌 Not all applications (for example, YouTube or online games) work stably.
  • 📱 On some firmware Magic UI option Bluetooth modem hidden - it must be enabled via Developer mode.
How to enable Bluetooth modem on Honor without an item in the menu?

Activate Developer mode (tap on Build number 7 times), then in Settings → About phone), then to Settings → System → Developer mode find the option Bluetooth modem and enable it.

3. Distribution via USB cable (maximum stability)

The most reliable, but least convenient method is USB modem. Suitable for long-term Internet distribution (for example, when setting up a second phone or updating firmware), as it does not consume the battery of the main device. The speed is comparable to Wi-Fi (up to 100 Mbit/s), but requires a cable USB-C/USB-C or adapter.

Instructions:

  1. Connect your phones with a cable (on some models Honor you will need to select the mode File transfer or USB modem when a notification appears).
  2. On the main phone: Settings → Mobile network → Access point → USB modem.
  3. The Internet should appear on the second phone automatically (sometimes a reboot is required).

Problems and solutions:

Problem Cause Solution
The Internet does not appear Incorrect USB mode Select USB modem in the notification shade
The connection is interrupted The cable is damaged Try another cable (preferably the original one)
Low speed USB 2.0 instead of 3.0 Use a cable with support USB 3.1
The phone does not detect the connection There are no drivers Install HiSuite from the official website Huawei
💡

USB modem is the only way to distribute the Internet that does not depend on the battery level of the main phone. Ideal for long-term tasks (for example, downloading large files).

4. Hidden settings: how to bypass operator restrictions

Many Russian operators (for example, MTS, Beeline, Tele2) block Internet distribution on some tariffs or limit the speed. There are two ways to get around this:

Method 1: Changing APN

  1. Go to Settings → Mobile network → Access points (APN).
  2. Select the current APN profile (usually the operator name).
  3. In the field APN type add a value separated by commas dun (example: default,supl,dun).
  4. Save changes and reboot your phone.

Method 2: Using a VPN

Some VPN services (for example, 1.1.1.1 or ProtonVPN) mask access point traffic, bypassing blocking. Install the VPN on main phone (the one that distributes the Internet) and activate it before turning on the access point.

💡

If the Internet disappears after changing the APN, return the original settings and try another VPN. On models Honor 70/80/90 sometimes resetting the network settings helps (Settings → System → Reset → Reset mobile network).

⚠️ Attention: Changing the APN or using a VPN to bypass operator restrictions may violate the terms of the tariff plan. Before using, check the rules in your personal account or contact support.

5. Optimizing distribution: how to increase speed and stability

Even if the access point is enabled, the speed may be low due to incorrect settings:

  • 📶 Select network: B Settings → Mobile network → Network type install LTE only (if available). On Honor Magic 4/5 there is also an option 5G/4G/3G (auto) - experiment with it.
  • 🔄 Changing the Wi-Fi channel: In the access point settings, select channel 6 or 11 (they are the least loaded).
  • 🔋 Energy saving: Disable Adaptive brightness i Background activity on the main phone - this will reduce the load on the processor.
  • 🛡️ Firewall: On some models Honor the built-in firewall blocks access point traffic. Disable it in Settings → Security → Firewall.

For models with Magic UI 7.0+ an option is available Smart access point (in the distribution settings). It automatically turns off the access point when there are no connected devices, saving power.

6. Solving problems: the access point does not work

If the Internet is not distributed despite all the settings, check these points:

⚠️ Attention: On phones Honor X6/X7/X8 with firmware Magic UI 6.0 there is a bug: after updating the OS, the access point stops working. The solution is to reset the network settings (Settings → System → Reset → Network reset).
Symptom Probable cause Solution
The access point turns on and turns off immediately Conflict with energy saving Add the application Settings to the optimization exceptions
There is a connection, but the Internet does not work Operator blocking Try VPN or change APN
Low speed (less than 1 Mbps) Operator network overload Switch to another network (2G/3G/4G) manually
The phone is not visible as an access point Wi-Fi module failure Turn on and turn off Airplane mode

If nothing helps, reset to factory settings (after saving the data first). settings Honor this is done through Settings → System → Reset → Reset all settings.

7. Alternative methods: distribution without an access point

If standard methods do not work, try these workarounds:

  • 🌐 Cloud proxy: Install the application on both phones PdaNet+ (requires root on some models). It creates a VPN tunnel for distributing the Internet, bypassing blockages.
  • 🔗 Reverse tethering: Connect the second phone to the PC via USB, and the PC to the Internet through the first phone. You will need ADB developer rights.
  • 📡 Local server: On the main phone, launch an HTTP proxy (for example, through ProxyDroid), and on the second phone, set up a connection to it.

These methods are more complicated in the settings, but they work even where the operator completely blocks standard distribution.

FAQ: Frequently asked questions

Is it possible to distribute the Internet from Honor to an iPhone?

Yes, but on the iPhone you will need to manually specify DNS (for example, 8.8.8.8) in the Wi-Fi settings, so how some iPhone models do not connect to Android hotspots without this.

Why does the battery drain quickly when distributing the Internet?

Internet distribution activates simultaneously mobile module, Wi-Fi/Bluetooth and processor, which increases energy consumption by 3-5 times. Use a USB modem or powerbank.

How to distribute the Internet from Honor to a laptop?

Similar to distribution to a phone: turn on the Wi-Fi hotspot or connect via USB (on a laptop, select Local network connection v Network connections).

Is it possible to distribute the Internet from two SIM cards at the same time?

No, Honor (like most Android smartphones) allows you to distribute the Internet only with one active SIM card. The second slot is blocked.

How to learn how much traffic was spent on distribution?

Q Settings → Mobile network → Traffic usage select your SIM card and view the graph. Unfortunately, Honor does not separate traffic “for phone” and “for distribution” - the total consumption is shown.