How to distribute the Internet from an Honor phone to another Android: all methods 2026

Distributing the Internet from Honor to another smartphone Android is a task that millions of users face every day. Whether you are on a trip, at the dacha, or just want to save on mobile traffic, knowledge of all the nuances of setting up an access point on devices Honor (especially with firmware EMUI or MagicOS) will help you avoid common mistakes. Unlike “naked” Android, the brand’s proprietary shells have unique features - for example, mode Wi-Fi Bridge or optimized power consumption during distribution.

In this article we will analyze all current methods of distributing the Internet - from classic Wi-Fi Hotspot to alternative methods through Bluetooth and USBthat work even with operator restrictions. We will pay special attention to models Honor Magic 5/6, Honor X9/X10 and Honor Play, where the settings interface may differ. And if you encounter the error “Failed to turn on the access point,” you will find proven solutions at the end of the article.

1. Preparing an Honor phone for Wi-Fi distribution

Before turning on the access point, make sure that your Honor is ready to act as a “router”. Here are the key points:

• 📶 mobile data: data transmission must be active on the donor phone (3G/4G/5G). Check your balance - some operators block distribution when the account is zero.
• 🔋 Battery charge: Wi-Fi distribution consumes up to 20-30% charge per hour. Recommended minimum - 40%.
• 🛡️ Security: If you have previously set up a VPN or firewall (for example, Huawei Mobile Security), temporarily disable them - they may block traffic.
• 📱 Software updates: in EMUI 13+ i MagicOS 7+ new distribution options have been added (for example, speed limits for connected devices). Update the firmware in Settings → System → Software update.

On models Honor Magic 6 Pro and newer there is a function Smart access pointthat automatically turns off distribution when inactive more than 10 minutes. To deactivate it:

1. Go to Settings → Mobile network → Access point.
2. Tap on the three dots (⋮) → Additional settings.
3. Disable the option Automatic shutdown.

⚠️ Attention: On Honor Play 30/40 with a chipset Kirin 710 When Wi-Fi is distributed, the processor may heat up. Use the mode Energy saving in the battery settings if the temperature exceeds 45°C.

2. Method 1: Distribution via Wi-Fi Hotspot (recommended)

This is the most universal and fastest method, working on all models Honor — from Honor 8X (2018) to Magic V2 (2026). The data transfer speed reaches 100 Mbit/s (on 5G models - up to 300 Mbit/s), which is enough for streaming in 1080p or online games.

Step-by-step guide:

1. Open Settings → Mobile network (or Wireless networks on older versions EMUI).
2. Select Access point (on some models - Modem mode).
3. Activate the slider Wi-Fi access point.
4. Click Access point setupto change:
   • 🔐 Network name (SSID): by default - phone model (for example, HONOR-Magic6-1234).
   • 🔑 Password: minimum 8 characters (we recommend using letters, numbers and signs).
   • 📡 Band: 2.4 GHz (better for range) or 5 GHz (faster, but smaller radius).

Save the changes and connect the second phone to the created network.

Parameter	Recommended value	Explanation
Security	WPA2-PSK	The most balanced option in terms of speed and protection. WPA3 supported only on Honor Magic 5/6.
Channel Wi-Fi	Auto or 6 (2.4 GHz)	Manual channel tuning will help avoid interference in apartment buildings.
Max. connections	8 devices	On Honor X9a and older can be increased to 10 through the engineering menu (##4636##).

On Honor 50/60/70 s MagicOS 7.0+ a "Traffic Priority" function has appeared, which allows you to limit the speed for individual devices. Useful if several gadgets are connected to your point.

The network name (SSID) is visible in the Wi-Fi list on the second phone|

The password was entered without errors (case is important!)|

mobile data is enabled on the donor phone|

The correct SIM card is selected in the access point settings (if there are two)-->

3. Method 2: Distribution via Bluetooth (economical option)

If Wi-Fi is disabled or you want to save battery batteries, Bluetooth-distribution is a good alternative. The speed is lower (2-5 Mbit/s), but enough for instant messengers or mail. The main advantage is minimum power consumption (3-4 times less than Wi-Fi).

How to set it up:

1. On the donor phone (Honor):
   • Activate Bluetooth in the notification shade or through Settings → Bluetooth.
   • Go to Settings → Mobile network → Access point → Modem mode.
   • Enable Bluetooth modem.
2. On the second phone:
   • Turn on Bluetooth and find yours in the list of devices Honor.
   • Connect (you may need to confirm the code on both phones).
   • In the mobile network settings, select Bluetooth Internet (on some firmware - Modem via Bluetooth).

⚠️ Attention: On Honor Play 50 and other models with Kirin 820 when distributing via Bluetooth, the error “Connection is not possible” may occur. Solution: Reboot both phones and repeat pairing.

Advantages of the method:

• ⚡ Low power consumption (suitable for long trips).
• 🔒 More secure connection (less risk of interception traffic).
• 📱 Works even if the Wi-Fi module is broken.

Disadvantages:

• 🐢 Wi-Fi is 10-20 times slower.
• 📴 Limit on 1 connected device.
• 🎧 You cannot listen to music via Bluetooth at the same time.

4. Method 3: Distribution via USB (maximum stability)

A USB modem is the ideal choice if you need stable speed without packet loss. Relevant for online games, video conferencing or downloading large files. The speed is limited only by the capabilities of USB port (up to 480 Mbit/s on USB 3.0).

What you will need:

• 🔌 Cable USB-C/USB-A (original or certified).
• 📱 Second phone with support USB OTG (most modern Android devices).
• 🔋 Power adapter (optional if the donor is discharged).

Step-by-step setup:

1. Connect your phones with a cable. Honor a notification “USB connection” will appear.
2. Tap on the notification and select Data transfer (or USB modem, if there is such an item).
3. On the donor phone go to Settings → Mobile network → Access point.
4. Activate USB modem.
5. On the second phone in the network settings select be called USB Internet (may be called Ethernet).

Honor model	USB modem support	Notes
Honor Magic 5/6	✅ Yes (USB 3.1)	Speed up to 500 Mbit/s. Requires cable with chip eMarker.
Honor X8/X9	✅ Yes (USB 2.0)	Maximum 40 Mbit/s. May get warm during prolonged use.
Honor Play 20/30	⚠️ Partially	Works only with cables from Huawei/Honor. data-i="224">On

⚠️ Attention: On Honor 30/40 USB distribution may block charging of the donor phone. Use a Y-cable with power or connect the charger to the second port (if available).

5. Solving problems: “Could not turn on the access point”

The error appears on Honor for three main reasons: operator restrictions, software failures or hardware problems. each.

1. Blocking by the operator:

• 📵 Some tariffs (for example, "Internet for devices" from MTS or "Unlimited on a smartphone" from Beeline) have Internet distribution disabled by default.
• 💳 Solution: send a USSD request *111*777# (for MegaFon) or check the conditions tariff in your personal account.

2. Settings conflict:

• ⚙️ Reset the network settings: Settings → System → Reset → Reset network settings.
• 🔄 Reboot the phone in Safe Mode (hold the power button → "Reboot in Safe Mode"). If the point works, third-party software is to blame (for example, AdGuard or NetGuard).

3. Hardware limitations:

• 📡 On Honor 8A/9A s chipset Mediatek Helio P35 the access point may not work due to an error in the Wi-Fi driver. Solution: update the firmware to EMUI 12+.
• 🔋 If the phone is discharged below 15%, some models block the distribution. Connect the charger.

What to do if the point. access turns on, but the Internet does not work?

1. Check that mobile data is turned on on the donor phone (4G/5G indicator in the status bar).

2. Disable VPN or proxy servers (for example, Psiphon or Orbot).

3. In the access point settings (Settings → Mobile network → Access point → Settings) change APN to internet (for Beeline) or mms (for Tele2).

4. If you use two SIM cards, select the one on which the Internet package is active in the section Mobile network → Access point → SIM card for data transfer.

6. Optimizing distribution: how to increase speed and operating time

Even if the access point is turned on, its operation may slow down due to background processes or non-optimal settings. Here's how to improve performance:

To increase speed:

• 🚀 Turn on High performance mode in the battery settings (Settings → Battery → Performance modes).
• 📶 On Honor Magic 4/5 activate 5G SA (5G standalone mode) in Settings → Mobile network → Network mode.
• 🔌 Connect the phone to the charger - when powered from the network, speed restrictions are removed.

To save battery:

• 🔋 Limit the maximum distribution speed to 50 Mbps in the access point settings (available on MagicOS 7+).
• ⏱️ Set an automatic shutdown timer (for example, after 30 minutes of inactivity).
• ☁️ Disable synchronization of cloud services (Google Drive, Huawei Cloud) on the donor phone.

For stability connections:

• 📡 Change the Wi-Fi channel manually (for example, to 11 for 2.4 GHz) if there are many networks in your location.
• 🛡️ Disable Wi-Fi Assist (in Settings → Wi-Fi → Advanced) if it automatically switches to mobile data.

Problem	Cause	Solution
Low speed (<10 Mbit/s)	Operator restriction or weak signal	Check network coverage or change location (for example, go to a window).
Frequent connection breaks	CPU overheating or interference	Remove the case, switch to 5 GHz (if supported).
The phone discharges quickly	Active network search or background applications	Enable Energy saving mode for background processes.

7. Alternative distribution methods (for experienced users)

If standard methods do not work, try these advanced options. They require additional settings, but sometimes they save you in unusual situations.

1. Distribution via Wi-Fi Direct:

• 🤝 Suitable for transferring the Internet between Honor and other devices without creating a full-fledged access point.
• 📱 Turn on Wi-Fi Direct v Settings → Wi-Fi → Wi-Fi Direct on both phones.
• ⚠️ Speed is limited 20 Mbit/s, but there are no limits on the number of devices.

2. Using applications for distribution:

• 📲 Applications like PdaNet+ or ClockworkMod Tether bypass operator restrictions.
• ⚙️ Required root access or activation Developer mode.
• ⚠️ Risk of SIM card blocking with frequent use (operators may regard this as a violation of tariff rules).

3. Configuration via ADB (for technical specialists):

If the access point is blocked at the firmware level, you can force it to turn on via Android Debug Bridge:

adb shell settings put global tether_dun_required 0
adb shell am start -n com.android.settings/.TetherSettings

After executing these commands, reboot the phone.

⚠️ Attention: On Honor with Kirin 990/9000 (for example, Honor View 30 Pro) changing settings via ADB may reset network settings. Create a backup in Settings → System → Backup.

8. Frequently asked questions (FAQ)

Can I distribute Wi-Fi with Honor if I have an unlimited tariff?

Yes, but operators can limit the distribution speed even on unlimited tariffs. For example, MegaFon after 50 GB a month reduces the speed to 128 Kbps for distribution (while the phone remains at full speed). Check the terms of your tariff in your personal account.

Why does the second phone connect to the access point, but the Internet does not work?

Reasons may be different:

• 📵 mobile data is disabled on the donor phone (check the 4G/5G indicator).
• 🔧 Incorrect APN (access point). For MTS this is internet.mts.ru, for Beeline — internet.beeline.ru.
• 🛡️ A firewall or VPN blocks traffic. Disable them temporarily.

If the problem persists, reset the network settings on both phones.

How to distribute Wi-Fi from Honor to iPhone?

The process is similar, but on iPhone nuances may arise:

• 🍎 In the settings of the access point on Honor select WPA2-PSK (AES) - this is the only supported iOS standard.
• 🔑 The password must contain only Latin characters (Cyrillic not supported).
• 📡 If iPhone does not see the network, reboot both devices.

How many devices can be connected to the Honor access point?

Depends on the model:

• Honor Magic 6 Pro - up to 10 devices.
• Honor X9a/X8a - up to 8 devices.
• Honor Play 50 - up to 5 devices.

When connecting more than 3 devices the speed is divided equally between them. For stable operation, we recommend limiting yourself to 1-2 gadgets.

Is it possible to distribute Wi-Fi from Honor if the phone itself is connected to another Wi-Fi network?

Yes, but only on models with MagicOS 7.0+ or EMUI 13+. The function is called Wi-Fi Bridge:

1. Connect to the main Wi-Fi network.
2. Go to Settings → Wi-Fi → Advanced → Wi-Fi bridge.
3. Enable the option and configure the distribution parameters (as in normal access point).

⚠️ Please note: the speed will be limited by the speed of the original Wi-Fi network.