Slow Internet from Tele2 on smartphones Xiaomi is a common problem that can arise due to incorrect settings network, overloaded towers or operator restrictions. This is especially noticeable on budget models Redmi and POCO, where hardware limitations of the communication module increase delays. In this article we will look at 7 working methodshow to increase the speed of mobile data without purchasing a new tariff or changing operator.

It is important to understand: the speed depends on three key factors - phone settings, Tele2 coverage quality and network load in your region. We will focus on the first two, since you cannot influence the operator’s infrastructure. All methods have been tested on current firmware MIUI 14/15 and work both on flagships (Xiaomi 13/14) and on budget models (Redmi Note 12, POCO X5).

If after applying all the tips the speed remains low, the problem may lie in hardware limitations your smartphone (for example, lack of support 4G+ or 5G) or in software failures firmware. In this case, only replacing the device or contacting a service center will help.

1. Checking the current speed and diagnosing problems

Before optimizing the network, you need to understand how much the Internet slows down and what exactly is the “bottleneck”. To do this:

  • 📊 Use the application Speedtest by Ookla (free in Google Play). Run the test 3 times at different times of the day - morning, afternoon and evening. Compare the results with standard values ​​for your Tele2 tariff (listed in the operator’s personal account).
  • 📡 Check signal level in the status line. If the indicator shows 1-2 bars, the problem is poor coverage, and not in the phone settings.
  • 🔄 Switch between 4G and 3G manually: sometimes in densely populated areas 3G works more stable due to less workload.

Pay attention to ping (server response delay) in the test results. If it exceeds 150 msthis indicates network congestion Tele2 or a large distance to the nearest tower. In this case, only changing the location or operator will help.

📊 What is your Tele2 tariff?
My Online
My Conversation
My Unlimited
Other

2. Optimizing APN settings for Tele2

Incorrect parameters APN (access points) are one of the main reasons for slow Internet. Xiaomi sometimes resets these settings after updating the firmware or changing the SIM card. Here are the current parameters for Tele2 for 2026:

Parameter Value
Name Tele2 Internet
APN internet.tele2.ru
Authentication type PAP
Type APN default,supl
APN protocol IPv4/IPv6

To change settings:

  1. Go to Settings → SIM cards and mobile networks → Tele2 → Access points (APN).
  2. Click on the three dots in the upper right corner and select New access point.
  3. Enter the parameters from the table above, save and select a new profile.
  4. Reboot the phone.
⚠️ Attention: If after changing the APN, the Internet disappeared completely, return to the standard settings and check if Tele2 access is blocked due to non-payment or tariff restrictions. In MIUI sometimes settings are reset after an update - watch the system notifications.

☑️ Check APN before saving

Completed: 0 / 4

3. Selecting the optimal network mode

Smartphones Xiaomi by default use automatic network selection, but this is not always optimal. In densely populated cities 4G it can be overloaded, and in rural areas 3G it is more stable. To manually switch:

  • 📶 Open Settings → SIM cards and mobile networks → Tele2 → Network type.
  • 🔄 Try the options one by one:
    • Only 4G (LTE) —maximum speed, but may be unstable;
    • 3G/4G (auto) - balance between speed and stability;
    • Only 3G —if 4G is constantly interrupted.
  • 📱 On models with support 5G (Xiaomi 12/13/14) turn on 5G/4G/3G (auto), but keep in mind that Tele2 has not yet deployed a full-fledged fifth generation network in all regions.

After changing the mode, wait until you reconnect to the network (the network icon in the status bar will change appearance) and check the speed via Speedtest. On some firmware MIUI after manually selecting a network, a reboot may be required.

💡

If in your region Tele2 is actively deploying 5G, but the smartphone does not pick up the network, update the firmware to the latest version. Older builds MIUI may not support new ranges.

4. Disabling background processes and optimizing traffic

MIUI is known for its aggressive management of background processes, but sometimes this plays against the user: applications like Facebook, TikTok or VKontakte can “eat up” traffic even in a minimized state. To limit them:

  • 🚫 Go to Settings → Applications → Manage applications.
  • 📉 Select an application, which you suspect of consuming traffic, and disable:
    • Background data transfer;
    • Autostart;
    • Show notifications (they also consume traffic).
  • 🔄 Turn on Traffic saving mode in Settings → Connections and sharing → Traffic saving.

Pay special attention to system services MIUIsuch how Mi Video, Mi Cloud and Security —they are updated frequently in the background. If speed is critical, disable their auto-update in Settings → About phone → System update → Settings (⚙) → Auto-update via mobile network.

⚠️ Attention: Disabling background processes for instant messengers (WhatsApp, Telegram) will lead to delays in receiving messages. Use this method only for non-critical applications.

5. Resetting network settings and updating firmware

If the previous methods did not help, the problem may lie in software failure. On Xiaomi this often appears after unsuccessful updates or changing the SIM card. Try:

  1. Reset network settings:
    • Go to Settings → System and device → Advanced → Reset settings → Reset network settings.
    • Confirm the action. The phone will reboot and all network settings (Wi-Fi, mobile network, Bluetooth) will return to factory settings.
  2. Update firmware:
    • Go to Settings → About phone → System update.
    • If available update, download and install it. In new versions MIUI often fix bugs with connecting to networks Tele2.

After resetting the settings, you will have to re-enter your Wi-Fi passwords and configure APN for Tele2 (see section 2). If the problem persists, this may indicate the hardware defect communication module - in this case, only a service center will help.

What to do if after resetting the network the Internet has disappeared completely?

If after the reset the mobile data does not work, check:

1. Is Airplane mode enabled (should be disabled).

2. Is the SIM card inserted correctly (try reinstalling it).

3. Is the tariff plan active (sometimes Tele2 blocks access if the balance is zero).

If all else fails, contact the operator's support - perhaps the problem is on their side.

6. Using a VPN to bypass Tele2 restrictions

Sometimes Tele2 artificially limits the speed for certain services (for example YouTube, Twitch or torrent trackers). In such cases, it helps VPN, which encrypts the traffic and hides it from the operator. Free options:

  • 🔒 ProtonVPN —unlimited traffic, but limited speed on the free plan;
  • 🌍 Windscribe —10 GB of traffic per month, there are servers in Russia;
  • ⚡ 1.1.1.1 (Cloudflare) —not a full-fledged VPN, but speeds up DNS queries.

To set up VPN:

  1. Download the application from Google Play.
  2. Select a server in Russia or a nearby country (for example, Kazakhstan or Belarus for minimal delays).
  3. Connect and check the speed via Speedtest.

Please note: VPN can reduce speed due to encryption, but it will remove artificial restrictions Tele2. For video streaming (for example, YouTube to 1080p), it is better to choose servers that support the UDPprotocol.

7. Alternative methods: from replacing the SIM card to changing the operator

If all software methods have been exhausted and the speed remains low, consider:

  • 🆔 SIM card replacement. Old cards (issued before 2020) may not support modern communication standards (VoLTE, 4G+). Contact the salon for a new card. Replacement SIM card. If your home has a weak signal, installing Tele2 for a new one USIM-card.
  • 📶 Using a signal repeater. If your home has a weak signal, install 4G repeater (for example, Huawei B525) can increase the speed by 2-3 times.
  • 🔄 Changing operator. Check coverage MTS, Beeline or MegaFon in your region via the website karta.rf. Sometimes switching to another operator gives a speed increase of up to 50-100%.

Before changing an operator, test the speed of its network using eSIM (if your Xiaomi supports this function). For example, MegaFon i MTS offer free trial periods for eSIM.

💡

If Not a single method helped, the problem may be hardware limitations of your smartphone. Budget models Xiaomi (for example, Redmi 9A or POCO M3) are often equipped with weak modems that are physically unable to provide high speed even with an ideal signal.

FAQ: Frequently asked questions about speeding up Tele2 Internet on Xiaomi

Why does the speed drop in the evening?

This is due to peak load on the network Tele2. In the evening, when most users are actively using the Internet, the towers' bandwidth is distributed among a large number of devices. Solutions:

  • Use 3G instead of 4G - this network is less loaded;
  • Connect to a VPN - sometimes it helps to bypass restrictions;
  • Delay downloading large files at night (from 2 to 6 am).

How to check if my Xiaomi supports 4G+ or 5G?

Go to the website GSMArena, find your model and look at the section Network. For example:

  • Xiaomi Redmi Note 12 supports 4G+ (LTE-A) and 5G;
  • Xiaomi Redmi 9A —only basic 4G without channel aggregation.

If your smartphone does not support 4G+, the maximum speed will be limited. 150 Mbit/s even with an ideal signal.

Can a virus slow down the Internet?

Yes, some viruses (adveriz or backdoors) consume traffic in the background. Check your phone using Malwarebytes or built-in antivirus MIUI (Security → Scan). If you find suspicious applications, remove them and reset the network settings.

What to do if after updating MIUI the Internet missing?

This is a common problem when migrating to new versions. MIUI. Solutions:

  1. Reset the network settings (Settings → Reset settings → Reset network settings);
  2. Remove and re-add the access point Tele2 (see section 2);
  3. Roll back to the previous firmware version via Fastboot (instructions are on the forum 4PDA).

If all else fails, wait for the next update - usually network bugs are fixed within 1-2 weeks.

Does disabling VoLTE help increase speed?

No, VoLTE (voice communication over 4G) does not affect the Internet speed. On the contrary, disabling it can worsen the quality of calls. If you have problems with speed, try:

  • Enable VoLTE (if it is disabled);
  • Update the firmware - in new versions MIUI support for this technology has been improved.