Have you ever encountered a situation where you urgently need to know The IP address of your Wi-Fi on Android, but don’t have a computer at hand? You may need to configure your router, check your local network connection, or troubleshoot Internet problems. In this article we will analyze all possible methods - from standard settings to hidden commands for experienced users.

It is important to understand that Android does not always show the IP directly in the interface. On some firmware (for example, MIUI or One UI), the path to this information may differ. We took into account all the nuances and collected universal methods that work on Samsung Galaxy, Xiaomi Redmi, Honor, Realme and other popular brands. Even if you have an outdated version of Android 8-10 or the latest Android 14, the instructions will remain relevant.

We will pay special attention to the difference between local IP (which gives the router to devices on the network) and external IP (your address on the global network). They are often confused, but their tasks are completely different. We’ll also figure out why this information might be needed at all and how to use it correctly.

1. Standard method: through Android settings

The easiest method is to use the built-in network settings. It works on 90% of devices without additional applications. Here are step-by-step guide:

  1. Open Settings (gear icon in the application menu).
  2. Go to section Wi-Fi or Connections → Wi-Fi (on Samsung).
  3. Click on the name of your network (not on the switch!).
  4. Scroll down to the block Additional or Network settings.
  5. Look for lines IP address, Gateway or DNS.

On some firmware (for example, ColorOS on Oppo/Realme) the path may look like this: Settings → Wi-Fi and networks → Manage networks → [your network] → Show additional settings. If you don’t find the IP, try the next method.

💡

On Xiaomi s MIUI 14+ sometimes you need to double-tap on the network name for advanced options to appear.

What to do if there is no IP in the settings? This may mean:

  • 🔄 Your router uses DHCP with dynamic address distribution (IP changes with each connection).
  • 🔒 You have a VPN or proxy enabled that masks the local network.
  • 📱 Outdated Android firmware (up to version 7.0) - the settings interface there is very different.

2. Through the "Wi-Fi Analyzer" application (without root)

If the standard settings do not show IP, third-party utilities will come to the rescue. One of the most reliable is WiFi Analyzer (from farproc). It not only displays the current IP, but also analyzes the signal quality, busy channels and neighboring networks.

How to use:

  1. Download WiFi Analyzer from Google Play (free, without unnecessary water in the basic version).
  2. Open the application and connect to your Wi-Fi network.
  3. Go to the tab AP List (Access Points).
  4. Tap on your network - a window will appear with detailed information, including IPv4 address.

Advantages of this method:

  • 📊 Shows not only IP, but also MAC address, Gateway, DNS servers.
  • 🔍 Visualizes signal strength in real time (useful for optimizing location router).
  • 🛠️ Works even on devices with custom firmware (LineageOS, Pixel Experience).

Tap on your network in the list|Make sure the connection is active (the Wi-Fi icon is green)|Scroll to the "IP address" block|Check the gateway with the router address (usually 192.168.1.1 or 192.168.0.1)

-->

Please note: some antiviruses (for example, Avast or Kaspersky) may block application access to network information. If the IP is not displayed, temporarily disable protection or add WiFi Analyzer to exceptions.

3. Use the terminal: command ifconfig or ip route

For advanced users there is a way through Android terminal. It does not require root access, but you will need a command line emulator application, for example Termux (available in F-Droid) or Terminal Emulator.

Instructions for Termux:

  1. Install Termux from F-Droid (version from Google Play outdated).
  2. Open the application and enter the command: 
    termux-setup-storage

    (allow memory access when prompted).

  3. Enter: 
    ifconfig

    or an alternative command:

    ip route
  4. Look for block wlan0 (Wi-Fi adapter). The line inet will show your local IP.

Example output ifconfig:

wlan0: flags=4163 mtu 1500

inet 192.168.1.105 netmask 255.255.255.0 broadcast 192.168.1.255


inet6 fe80::xxxx:xxxx:xxxx:xxxx prefixlen 64 scopeid 0x20


..

If the command ifconfig is not found, set it to Termux:

pkg install net-tools
What to do if the terminal shows "Permission" denied"

This means that your device is restricting access to network commands without root. Try the alternative method with ADB (section 5) or use the applications from section 2.

What can this be useful for? For example, if you configure port forwarding on a router or check whether your IP conflicts with other devices on the network. This method is also useful for diagnosing problems with DHCP (if IP starts with 169.254.x.x, this means an error in obtaining an address).

4. How to find the external (public) Wi-Fi IP address

Local IP (type 192.168.x.x) is needed to set up a home network, but sometimes you need to find out external IP the one that sees the Internet. This is relevant for:

  • 🌍 Settings for remote access to home devices (cameras, NAS).
  • 🎮 Organization of a game server (Minecraft, CS:GO).
  • 🔒 Checks, is your IP included in the blacklists (ban by geolocation).

The easiest way to find out the external IP is through a browser:

  1. Open Chrome or any other browser.
  2. Go to one of the services:
    • https://ifconfig.me (shows only IP)
    • https://2ip.ru (Russian-language service with detailed information)
    • https://whatismyipaddress.com (with geolocation map)
  • The page will immediately show your public IP and provider.

    • Important: the external IP is assigned by your Internet provider, and it can be:

    • 🔄 Dynamic (changes with each connection or once a day).
    • 🔒 Static (fixed, usually a paid option).

    I learned it for the first time from this article|Only when I set up a router|Regularly for work/games|Never checked

    -->

    If you need a static external IP, contact your provider. For example, Rostelecom or Beeline provide this service for an additional fee (about 100-300 rubles/month). Without a static IP, it is difficult to set up remote access to your home network.

    5. Method for developers: ADB commands

    If you are debugging Android applications or testing networks, this will come in handy Android Debug Bridge (ADB). This method requires connecting the phone to the computer, but provides the most accurate information.

    Step-by-step guide:

    1. Enable Mode Developer on the phone: Settings → About phone → Build number (tap 7 times).
    2. Activate USB debugging in the developer menu.
    3. Connect the phone to the PC and open the command line (cmd on Windows or Terminal on macOS/Linux).
    4. Enter: 
      adb shell netcfg

      or for new versions of Android:

      adb shell ip route

    Example output:

    wlan0  UP                192.168.1.103/24

    lo   UP                127.0.0.1/8

    Advantages of ADB:

    • 🔧 Works even if the phone screen is broken (only a USB cable is needed).
    • 📡 Shows complete network statistics, including RX/TX packets (data reception/transmission).
    • 🛠️ Can be used for mass configuration of devices (for example, in the office).
    💡

    ADB commands are the only way to get IP on a device with a broken screen if the USB port is working.

    Limitations:

    • ⚠️ Requires computer and installed ADB drivers.
    • ⚠️ On some firmware (for example, Huawei EMUI) you need to additionally enable debugging each time you connect.

    6. Alternative methods: router and specialized applications

    If none of the above worked, there are two more reliable methods:

    Method 1: View the IP in the admin panel of the router

    1. Find out the IP of your router (usually 192.168.1.1 or 192.168.0.1).
    2. Open your browser and enter this address in the address bar.
    3. Log in (default logins: admin/admin or look on the router sticker).
    4. Find the section DHCP, Connected devices or Local network.
    5. In the list of devices, find your phone (by name or MAC address).

    Method 2: Network monitoring applications

    Useful utilities:

    Application Functions Requires root?
    Fing Scans the network, shows the IP of all devices, ports, manufacturers No
    Network Scanner Local network analysis, ping, traceroute No
    NetX Advanced diagnostics, speed test, WHOIS for IP Partially
    IP Tools Wi-Fi analysis, port checking, DNS lookup No

    These applications will not only show your IP, but will also help:

    • 🔍 Detect “extra” devices on your network (possible hackers).
    • 📶 Check the connection speed to the router.
    • 🔌 Diagnose problems with DNS or MTU.
    💡

    B Fing you can save a scan of the network in PDF - convenient for home documentation infrastructure.

    Why even know the Wi-Fi IP address on Android?

    At first glance, this information may seem unnecessary to the average user. But in practice, knowing your IP comes in handy in the most unexpected situations:

    1. Setting up a home server or NAS

    If you connect network storage (Synology, QNAPor run a home media server (Plex, Jellyfin), you need to register a static IP for the phone so that it always has access to resources.

    2. Remote device management

    Applications like TeamViewer or AnyDesk for remote access require knowledge of the local IP if you are connecting via a local network (without cloud servers).

    3. Diagnosis of network problems

    If the Internet is slow or periodically disappears, an IP check helps to identify:

    • 🔄 IP address conflict (two devices received the same address).
    • 🚫 Problems with DHCP (the router does not issue addresses).
    • 🔒 Blocking at the router level (for example, by MAC address).

    4. Games and streaming

    For online games (Minecraft, Terraria) or streaming via OBS sometimes you need to manually register an IP to connect to the server.

    5. Security

    Regular checking of connected devices in the router helps detect unauthorized access. For example, if an unfamiliar IP with an unknown manufacturer appears in the DHCP list.

    💡

    Knowing your IP is like knowing your house number. Without it, you will not be able to receive “packages” (data) from the network or send them to other devices.

    Common errors and how to avoid them

    When working with IP addresses, users often encounter typical problems. Here are the most common ones and how to solve them:

    Error 1: IP address starts with 169.254.x.x

    This means that your device was unable to obtain an address from the router (DHCP error). Reasons:

    • 🔌 The router is turned off or faulty.
    • 🔄 Too many devices on the network (IP pool exhausted).
    • 🔒 The router has a filter enabled MAC addresses, but your phone is not there.

    Solution: reboot the router or assign a static IP manually in the phone settings.

    Error 2: Local and external IP are the same

    This is impossible in a normal situation. Most likely, you are confused:

    • 🌐 External IP (shows 2ip.ru).
    • 🏠 Local IP (assigned by the router, for example 192.168.1.5).

    Error 3: Applications show different IPs

    This is normal if:

    • 🔄 You are connected to a VPN or proxy (they replace IP).
    • 📶 You are using mobile data (3G/4G) instead of Wi-Fi.
    • 🔄 The router has several subnets (for example, guest and main networks).
    💡

    To check if the VPN is replacing your IP, disable it and compare the results before and after. ifconfig.me before and after.

    Error 4: You cannot change the IP in the Android settings

    On some firmware (for example, EMUI on Huawei) IP field is blocked. Solutions:

    • 🔧 Assign a static IP through the admin panel of the router (bind by MAC address).
    • 📱 Use applications like NetMaster (requires root).
    What is a MAC address and why do you need it?

    MAC address is a unique identifier for a network adapter (for example, 00:1A:2B:3C:4D:5E). Routers can use it for:

    - Binding a static IP to a specific device.

    - Access filtering (allow only known MACs to connect).

    - Speed limits for individual gadgets.

    Is it possible to find out the IP of someone else's Wi-Fi without connecting?

    No, this is impossible. An IP address is issued only after connecting to the network. However, you can see MAC address someone else's router (if it is not hidden) through applications like WiFi Analyzer, but this will not give you access to their local network.

    Why does my IP change every time I connect?

    Most likely, you have DHCP enabled on your router with a short IP lease time. This is normal for home networks. If you need to fix your IP, set up a static binding by MAC address in the router's admin panel or assign a static IP manually on your phone.

    How to hide your IP on a Wi-Fi network?

    To do this, use:

    • 🔒 VPN applications (ProtonVPN, NordVPN).
    • 🌐 Proxy servers (manually configured in Wi-Fi settings).
    • 🦊 Browser Tor for anonymous surfing.

    Please note: this will hide your IP from sites, but on the local network the router will still see your real address.

    Is it possible to determine the location of a phone using IP?

    Local IP (for example, 192.168.1.5) does not contain information about geolocation. External IP allows you to determine:

    • 📍 City or region (accuracy ~10-50) km).
    • 🏢 Internet provider.

    Other methods are used to accurately determine the location: GPS, cell tower data or Wi-Fi triangulation (in Google Maps).

    What to do if all methods show IP 0.0.0.0?

    This means that:

    • 🔌 Wi-Fi connected, but there is no Internet (problems with the provider).
    • 🔄 The protocol is disabled on the phone IPv4 (check the network settings).
    • 🛠️ Failure in the Android network stack (rebooting or resetting the network settings will help).

    Try to connect to another network or reboot the router.