Modern budget smartwatches, such as model X22 Pro, are becoming increasingly popular due to the ratio of price and functionality. However, users often encounter difficulties when initializing the device, especially if the default interface is set to English or Chinese. Correct setup smart watches requires not only physical activation, but also correct pairing with the phone through a specialized application.
The process of synchronization with the operating system Android has its own nuances that differ from the standard connection of headphones or other accessories. Errors at the application selection stage or ignoring access rights often lead to notifications not being received and steps not being counted. In this material, we will analyze in detail every step necessary for the full operation of your gadget.
It is important to understand that successful setup depends on the version of Android on your smartphone and the relevance of the firmware of the watch itself. We will look at all aspects: from unpacking to fine-tuning notifications and widgets, so that you can get the most out of your purchased device.
Preparing the device and checking the contents
Before starting the software setup, you need to make sure that the device is in physical condition and is charged. Clock X22 Pro are often shipped with a partial battery charge, which may not be enough for a full update and setup cycle. Connect the device to the charging cable provided and wait until the battery icon appears on the screen.
Carefully inspect the back cover of the watch and the contact pads on the charger. Any dirt or protective films may prevent proper charging, resulting in sudden shutdown during setup. Make sure that the screen responds to touches and there are no visible defects in the matrix.
⚠️ Attention: Do not use powerful charging blocks from modern smartphones (fast charging 30W and above), since the power controller in budget watches may not withstand high current. It is better to charge from the USB port of a computer or a 5V/1A unit.
After turning on the device, check the basic reactions of the interface. If the screen lights up but the sensor doesn't work, try performing a force reboot by holding the side button for 10-15 seconds. This action often solves freezes firmware during the first launch.
Selecting and installing the right application
The key point in setting up the watch X22 Pro is choosing the appropriate software. Unlike branded devices, there is no single standard, and manufacturers may use different platforms for different batches of goods. There is usually a QR code on the box or in the instructions that leads to the download page.
The applications most often used for this model are Da Fit, WearPro or HryFine. They should be downloaded strictly from official stores Google Play or App Storeto avoid malicious modifications. Installing third-party APK files from unverified resources may jeopardize data security your phone.
- 📱 Scan the QR code on the watch box with your phone camera to go to the application store.
- 🔍 If the code is not readable, enter the name of the intended application in manual store search.
- ⚙️ Check compatibility: the application description should indicate a list of supported devices or mention the X22 series.
Sometimes it happens that the application specified in the instructions does not see the clock. In this case, try alternative software from the compatible list. Developers often change software providers for the same hardware platform.
The pairing process via Bluetooth
The most common mistake users make is trying to connect the watch directly through the Bluetooth menu in the phone settings. For all functions to work correctly, pairing must occur exclusively within the interface of the installed application. Direct connection on Android often blocks the transfer of health and notification data.
Run the installed application and register an account if required. Then go to the add device section, which is usually indicated by a clock icon or sign +. Turn on Bluetooth and geolocation on your smartphone, as modern versions of Android require access to location to search for BLE devices.
Settings → Applications → [Your application] → Permissions → Location (Always allowed)When the application finds the device X22 Pro in the list available, click on it to start pairing. A request to confirm the connection may appear on the watch screen - be sure to press the check mark or confirm button. The process may take from 10 to 30 seconds.
⚠️ Attention: If there is already a saved device named X22 Pro or similar in the phone's Bluetooth list, delete it ("Forget device") before starting the search through the app. A conflict of old settings will prevent a new connection.
After a successful connection, the data is synchronized and the time on the watch will automatically be updated according to the time on the phone. This is critical for the correct operation of alarm clocks and sleep trackers.
☑️ Checklist for successful pairing
Setting the language and interface
One of the main questions is how to set up the X22 Pro watch in Russian if it speaks Chinese or English when turned on. In most cases, the language of the watch is strictly tied to the system language of your smartphone. If the phone interface is in Russian, the watch should switch automatically after synchronization.
If automatic switching does not happen, go to the application settings on your phone. Find the section Device Settings (Device Settings) or Language. There, manual selection of the interface language may be available. Select Russian and wait for the settings to be applied.
| Parameter | Default value | Recommended setting | Impact on operation |
|---|---|---|---|
| Language systems | English/Chinese | Russian | Menu understanding |
| Units of measurement | Imperial (miles) | Metric (km) | Tracking accuracy |
| Format time | 12-hour | 24-hour | Easy to read |
| Wrist raise | Off | On | Auto-screen |
Also in this section you should pay attention to the time format. For users from the CIS, the most convenient is the 24-hour format, which eliminates confusion with the designations AM and PM. Changes are applied instantly after clicking the save button in the application.
What to do if the Russian language is not in the list?
If there is no Russian language for the watch in the application settings, this means that this firmware version does not support localization. In this case, you can try updating the watch firmware through the "Firmware Upgrade" section in the application. Sometimes new software versions add language support. If the update does not help, the interface will remain in English, but the main functions will work correctly.
Managing notifications and calls
Notification functionality requires careful configuration of access rights in the Android operating system. Without granting special permissions, the watch will not be able to display messages from instant messengers or missed calls. Go to your phone settings, find the notification section for the installed companion application.
Activate the switches for all the social networks you need: Telegram, WhatsApp, Viber and others. It is also important to enable access to the call log and contacts if you want to see the name of the caller on the watch display, and not just the phone number.
- 🔔 Enable the "Allow notifications" option in the application system settings.
- 📞 Provide access to the microphone if you plan to answer calls through the watch (if such a function is available).
- 📵 Set the "Do Not Disturb" mode in the application so that the watch does not vibrate at night.
It is worth noting that the watch cannot send replies to messages, it only works in the mode of displaying incoming information. Message text may be cut off if it is too long due to screen size and data transfer buffer limitations.
If notifications are delayed, go to your phone's battery settings and turn off power saving for the clock app. The Android system often “kills” background processes to save battery, which breaks the connection with the accessory.
Calibration of sensors and health
For accurate operation of the pedometer and heart rate monitor, you must enter your anthropometric data in the application profile. Go to the Profile or My section and indicate your height, weight, date of birth and gender. These parameters are used by algorithms to calculate calories burned and stride length.
The pulse sensor on models like X22 Pro works on the basis of optical glow. For correct measurements, the watch should fit snugly on your wrist, but not squeeze it. A too loose fit allows external light to enter under the sensor and distort the readings.
Regularly wipe the back of the watch with a soft cloth. Oil and sweat can accumulate on the sensor glass, reducing the accuracy of measurements during exercise. It is also recommended to periodically check the readings with a medical tonometer to understand the error of a particular instance.
⚠️ Attention: The readings of the sensors on budget watches are for reference purposes and are not medical data. Do not use them to make diagnoses or adjust treatment.
You can set activity goals in the app. Set a realistic goal for your daily steps to motivate yourself to move without overwhelming your body. The system will vibrate when intermediate targets are reached if this function is activated.
Measurement accuracy directly depends on the tightness of the strap and the cleanliness of the sensors. Regular calibration of the user profile improves training statistics.
Solving common problems and updates
During operation, situations may arise when the watch stops synchronizing or freezes. First, check for firmware updates in the application. Section Firmware Update allows you to download the latest software, which often contains fixes for communication errors.
If the update does not help, reset the watch to factory settings. This can be done through the menu of the watch itself (section Settings → Reset) or through the app. After the reset, you will have to go through the pairing procedure again, removing the old device from the Bluetooth list.
Problems with disconnection are often associated with the aggressive energy saving policy of Xiaomi, Huawei or Samsung smartphones. You need to add the watch app to the exceptions list and allow auto-start. Without this, the system will break the connection when the screen is locked.
Why does the watch discharge quickly?
Rapid discharge may be caused by the continuous heart rate monitoring feature being turned on or by a bright display. Try lowering the screen brightness and setting the heart rate interval to 10 or 30 minutes instead of constant mode. Also check if the "Always On Display" mode is turned on, which consumes a lot of energy.
FAQ: Frequently asked questions
Can I answer calls from the X22 Pro watch?
It depends on the specific modification. If the watch has a built-in speaker and microphone, as well as a Bluetooth calling function in the menu, then you can answer. If there is no speaker, the watch will only work as a remote control for hanging up or answering a call on the phone.
Why doesn’t the watch count steps when I push the stroller?
The accelerometer records the rhythmic vibrations of the hand. When pushing the stroller, the hand can remain relatively motionless. To improve accuracy in such cases, some apps allow you to mount your phone in a holder on the stroller, but the watch itself may underestimate the activity.
How to change the watch face?
The companion app has a "Market" or "Watch Faces" section. There you can select a free design and click “Install”. Loading a new watch face takes time and requires a stable Bluetooth connection.
Is the X22 Pro waterproof?
This watch is typically IP67 or IP68 rated, which means it's resistant to splashes, rain, and dust. However, it is not recommended to swim in a pool or take a hot shower with it, as steam and water pressure can damage the seal of the case.
What to do if the application does not see the watch when searching?
Make sure that the watch is not connected to another phone. Reboot both devices. Check if geolocation is enabled on your smartphone. Try clearing the application cache in the Android settings and running the search again.