The brand's smart watches LIGE gained popularity due to the combination of affordable prices, stylish design and wide functionality. However, after purchasing a new gadget, many users encounter difficulties with initial synchronization. The pairing process requires not just switching on Bluetooth, but also the correct installation of specialized software, which acts as a bridge between the wrist device and the smartphone.
In this article we will analyze in detail the algorithm of actions necessary for the successful integration of the ecosystem Android and watches LIGE. You'll learn how to avoid common mistakes, why the standard Bluetooth menu is not suitable for full accessory control, and what system settings can block stable notifications. Proper setup at the initial stage guarantees long battery life and correct transfer of health data.
Preparing devices before pairing
Before starting the procedure, you need to make sure that both devices are ready for interaction. Charge your watch LIGE to a level of at least 50%, as the initial setup and firmware update process may require significant energy consumption. A discharged device may turn off at the most critical moment, which will lead to failure of writing configuration files.
On your smartphone, check the operating system version Android. While the watch is compatible with most modern versions, some features, such as answering calls or controlling music, may require permissions that are only available in newer OS builds to function properly. Also free up some free space in the internal memory of your phone to install a proprietary application.
Turn on the wireless module on both gadgets. On a watch this is usually done through the settings menu or by holding the side button, while on a phone you just need to pull down the notification shade. Make sure your phone is not in airplane mode and can see other devices around it.
⚠️ Warning: Do not try to pair your watch directly through the standard menu Settings → Bluetooth of your phone. This will cause the device to connect only as a headset, and you will not be able to synchronize data about steps, sleep, or receive notifications from instant messengers.
Before connecting, restart your smartphone - this will clear the Bluetooth module cache and eliminate possible software conflicts with old connections.
Search and install the official application
The key element of the ecosystem LIGE is the companion mobile application. Different watch models may use different software, so it is critical to find the correct software for your version of the accessory. Usually the name of the required software is indicated in the instructions included in the kit or printed on the box.
The most reliable way to find the required application is to scan QR codelocated on the watch screen or in the user manual. The smartphone camera will automatically recognize the code and redirect you to the store Google Play or offer to download the installation file APK from the official website. If scanning is not possible, use the search in the application store.
The most common applications for watches of this brand are FitPro, Da Fit or WearPro. Download the selected app and wait for the installation to complete. After the first launch, the application will ask for a number of permissions to access contacts, location and notifications.
- 📍 Geolocation permission is necessary for the phone search function to work and correctly track routes during training.
- 📱 Access to notifications allows you to duplicate messages from WhatsApp, Telegram and SMS to the watch screen.
- 🔋 Permission to run in the background is critical so that the Android system does not “kill” the synchronization process to save power.
The process of registering and adding a device
After installation, launch the application and go through the registration procedure. In most cases, you will need to create an account linked to an email or phone number. This is necessary to save your health statistics in the cloud so that the data is not lost when you change your smartphone or reset your watch.
Login to your account and find the tab in the bottom menu responsible for managing devices. In different interfaces it may be called Device, My devices or have a clock icon. Click the Add device (Add Device) button. The application will begin automatically searching for available gadgets within Bluetooth range.
Your model name should appear in the list of found devices, for example LIGE GT Pro or similar. Click on it to start pairing. A request to confirm the connection may appear on the watch screen - accept it by clicking on the checkmark. The process of establishing a secure communication channel takes from 10 to 30 seconds.
Sequence of actions in the application:1. Open the "My" or "Profile" tab
2. Select "Add device"
3. Wait for the model name to appear in the list
4. Click "Connect" and confirm on the watch
⚠️ Attention: If the search lasts more than a minute and the device is not found, close the application completely through the multitasking menu and launch it again. Also check if the watch is connected to another phone at this moment.
Setting access rights and data synchronization
Successful connection is only half the battle. For full operation, you need to configure access rights in the system Android. Modern versions of the operating system strictly control the background activity of applications, so you need to manually add the watch software to the battery exclusion list.
Go to your phone settings, find the section Applications → Manage applications and select the installed watch app. In the “Battery Saver” or “Battery” menu, select the option No restrictions or Do not save battery. This will prevent the connection from breaking when the phone screen is turned off.
Next you need to activate access to notifications. In the application settings, find the section Notifications and turn on the switches for those services, messages from which you want to see on your wrist. Without this setting, the watch will vibrate only when there is an incoming call, ignoring instant messengers.
| Function | Required permission | Where to set |
|---|---|---|
| Tracking route | Geolocation (GPS) | Phone settings → Applications |
| Messages from social networks | Access notifications | Inside the clock application |
| Contact synchronization | Contacts and phone book | When you first launch the application |
| Pulse measurement 24/7 | Autostart and background mode | Phone battery settings |
Without permission to autostart and work in the background, the watch will lose connection with the phone every 15-20 minutes, which will lead to loss of heart rate and step data.
Solving common connection problems
Despite the simplicity of the procedure, users often encounter technical failures. The most common problem is that the watch is visible in the phone’s Bluetooth list, but the application does not find it. This means that the so-called “partial pairing” has occurred. You need to go to the phone's Bluetooth settings, find the watch in the list of paired devices and press Forget device or Cancel pairing.
After that, restart the Bluetooth module on your phone and try searching again exclusively through the app. If the problem persists, check to see if your phone has a power saving mode enabled, which may limit the operation of the wireless modules.
Another difficulty arises when updating the firmware. If the connection is interrupted while writing new data, the watch may freeze. Make sure that the phone is close to the clock (no further than 1 meter) and the signal level is stable. Do not minimize the application during the update.
What to do if the watch does not charge after a failure?
If after an unsuccessful update the watch stops responding to touches, try connecting it to the charger for 30-40 minutes. In some cases, long charging causes a hardware reset of the power controller, after which the device turns on again.
- 🔄 Reset the network settings on your phone if no Bluetooth devices connect correctly.
- 📶 Make sure that the Do Not Disturb mode is activated on your watch, which may block the display of notifications.
- 🛠 Check for updates for the application itself on Google Play - older versions may not support new watch models.
Optimization and additional functions
Once a stable connection has been established, it is recommended to customize the dial to suit your needs. The app allows you to download thousands of design options, including the ability to set your own photo as the background. This is done through the section Dials in the application menu.
It is also worth calibrating the sensors. Walk a known distance while holding your phone in your hand, and compare the pedometer data on your phone and your watch. If the difference is significant, you can adjust the step length in the application settings, which will increase the accuracy of calorie and distance calculations.
To extend battery life, disable functions that you do not use. For example, constant monitoring of blood oxygen or automatic backlighting of the screen when you raise your hand significantly drains the charge. Flexible configuration of these parameters allows you to increase the operating time from 3 to 7 days.
⚠️ Attention: The application interface and available functions may vary slightly depending on the firmware version of the specific LIGE model. The manufacturer regularly releases updates that change the logic of the menu.
☑️ Final check of the settings
Frequently asked questions (FAQ)
Is it possible to connect a LIGE watch to two phones at the same time?
No, the Bluetooth connection architecture in most smart models hours involves working with only one active device. To switch to another phone, you must first turn off the watch in the application on the first smartphone or reset the watch settings, and then carry out the pairing procedure again on the second device.
Why don’t I receive notifications from WhatsApp and Viber?
Most often the problem lies in the Android power saving settings. The system puts the watch application to sleep, and it stops reading notifications. It is necessary to pin the application in memory (via the multitasking menu) and prevent the system from closing it. Also check if the switches for specific instant messengers are turned on inside the watch application.
The watch shows the wrong time, how can I fix it?
The time on the LIGE watch is synchronized automatically with the smartphone when connected. If the time is wrong, check the time zone in your phone settings and make sure that the “Use network time” checkbox is checked. After that, open the watch application and pull down the list of devices to force synchronization.
How to reset the watch to factory settings?
This can be done in two ways. The first is through the menu of the watch itself: Settings → Reset. The second is through the app on the phone in the device management section. Resetting will delete all accumulated data for the current day, but will not affect the history in the cloud account if synchronization was successful.
Does the watch support answering calls?
Most modern LIGE models support Bluetooth calling. However, to do this, your phone must have the appropriate permission to access the microphone and phone book. If during a call the sound comes through the phone and not through the watch, check in the Bluetooth settings whether the watch is selected as the audio output device.